March 29, 2024
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Posted October 31, 2010 at 11:51pm by iClarified
EnglishBulgarianFrenchGermanPortuguese (Brazil)Swedish
Ci-dessous les instructions pour jailbreaker votre Apple TV 2G sous iOS 4.1 en utilisant PwnageTool pour Mac.

Etape 1
Créer un dossier "Pwnage" sur le bureau. Dans ce dossier, vous allez avoir besoin de plusieurs choses. PwnageTool 4.1.2, ici here ou ici.

Vous allez aussi avoir besoin du firmware 4.1 pour AppleTV.
4.1.0: AppleTV2,1_4.1_8M89_Restore.ipsw


Lors du téléchargement du fichier IPSW, il est préférable d'utiliser Firefox car Safari risque de l'extraire automatiquement!
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 2
Double cliquer pour monter PwnageTool puis glisser l'icone PwnageTool dans le dossier Pwnage.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Maintenant a partir du dossier Pwnage double cliquer pour lancer l'application PwnageTool.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Cliquer sur OK si une alarme survient.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 3
Cliquer sur Expert Mode dans la barre de menu supérieur.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 4
Cliquer pour sélectionner votre Apple TV. Une coche va apparaitre sur l'image du produit. Cliquer sur la flèche bleue pour continuer.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 5
Vous allez être diriger vers la page "Browse for IPSW". Cliquer sur le bouton Browse for IPSW....
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

A partir de cette nouvelle fenêtre, sélectionner votre firmware dans le dossier Pwnage puis cliquer sur le bouton Open.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 6
Vous allez alors être dirige vers un menu a plusieurs choix. Cliquer pour sélectionner General puis cliquer sur la flèche bleue.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Les paramètres General vous permette de choisir la taille de partition.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Le menu des paramètres Cydia vous permet de créer des packages personnalises. Vous n'aurez donc pas a les installer manuellement par la suite. La plupart de ces packages ne sont pas prêt pour l'AppleTV, nous allons donc cliquer sur la flèche bleue.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Le menu Custom Packages Settings nous liste les paramètres des packages pour notre IPSW personnalise. Pour le moment, laisser ces paramètres tels quels. Cliquer sur la flèche bleue pour continuer.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 7
Vous êtes maintenant prêt a lancer l'étape de pwnage! Clicquer sur le bouton Build pour le sélectionner puis cliquer sur la flèche Blue pour commencer.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 8
On va vous demander de sauver votre fichier .ipsw.Sauver le dans le dossier Pwnage que vous avez préalablement créé sur votre bureau.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Votre IPSW maintenant en cours de creation. Cela peut prendre jusqu'à 10 minutes.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

On va vous demander d'entrer votre password d'administrateur. Faites-le puis cliquer sur le bouton OK.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 9
Après création de votre ISPW on va vous demander de connecter votre AppleTV a votre ordinateur. Apres detection du materiel, l'outil Pwnage va vous guider au travers des etapes pour mettre votre AppleTV en mode DFU. Lors de ces étapes de Pwnage, vous ne devez pas raccorder le câble alimentation au secteur.

On va vous demander de presser et de maintenir enfonce les boutons Menu et Play pendant 7 secondes.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Après que votre Apple TV soit passer avec succès en mode DFU, l'utilitaire Pwnage va vous demander de lancer iTunes.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 10
Dans iTunes, maintenez enfoncer la touche Alt/Option et cliquer sur Restaurer.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 11
Naviguer vers le dossier Pwnage de votre bureau a l'aide de la fenêtre de dialogue qui apparait. Sélectionner le fichier IPSW personnalise qui vient d'être crée et cliquer sur le bouton Choose.
Comment Jailbreaker votre Apple TV 2G en utilisant PwnageTool (Mac) [4.1]

Etape 12
iTunes va maintenant restaurer le firmware sur votre Apple TV. Cela aussi peut prendre jusqu'à 10 minutes. A la fin, l'AppleTV va rebooter sur le firmware iOS 4.1 jailbreaker!

A ce jour, il n'y a pas l'application Cydia pour votre Apple TV vous allez donc devoir vous connecter manuellement en SSH a votre matériel. Vous devriez trouver votre adresse IP sous Paramètres:Général:Réseau. Le nom du compte est root et le password est alpine.


***SUGGESTIONS:
Si vous rencontrez error 1600, ou quelques choses de similaire lors de la restauration de l' ipsw personnalise dans iTunes alors essayer ces suggestions.
- Assurer d'utiliser la dernière version de l'outil Pwnage ie 4.1.2
- Assurer d'utiliser iTunes 10.0.1
- Essayer avec un autre câble, port USB ou un autre ordinateur
- Forcer a quitter iTunes et Aide iTunes avant d'enter en mode DFU.

***REMERCIEMENTS: Merci a Geohot et la Dev-Teams pour le super boulot qui a rendu le jailbreak et ce tuto possibles! Un merci tout particulier a MuscleNerd qui a aider a la résolution des problèmes survenus lors du jailbreak.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (27)
You must login or register to add a comment...
Zeljko
Zeljko - January 24, 2011 at 5:23pm
Please if somebody have time please try yesman`s method. Maybe will do the job. Please leave comments did you make it or not....Thanks
te72s
te72s - January 23, 2011 at 9:14pm
You need to make sure PwnageTool has the newest bundle, this should resolve the issue. 4.2.1 Firmware Bundle
cwf
cwf - January 21, 2011 at 9:00pm
I've gone through this several times, I opt-click on restore, pick my customer ipsw, iTunes extracts it, starts to verify, then tells me "this device isn't eligible for the requested build." When I click on more information it looks like the error I'm getting is 3194. Any thoughts on where I'm going wrong?
Tom
Tom - January 22, 2011 at 3:49pm
Me too. Works with Seas0nPass, but then I have to boot tethered. This gets to Step 12 in the tutorial and then says (exactly as yours does), that it "isn't eligible for the requested build"
Eagletooth
Eagletooth - June 29, 2011 at 3:18am
I'm getting the same dialogue: "This device isn't eligible for the requested build." :(
Zeljko
Zeljko - January 12, 2011 at 3:01am
I have try this tutorial 100 times and it didn`t work for me. I did everything propertly but i failed every time. And i am on 4.1 apple tv 2g
webphil75
webphil75 - March 14, 2011 at 11:16am
Hello, Impossible to pass DFU, i tried several times. Does somebody find a solution? (I french not to much help in french) Thanks
kwans
kwans - January 3, 2011 at 6:09pm
I have an apple tv but I don't know why I need to jailbreak an apple tv. Can u guys tell me benefits after jailbreaking? Can I get free movies or tv shows?
ricekake
ricekake - December 29, 2010 at 1:45am
OK...so I just got my ATV and I am getting the same message that it will not support the build. I have tried it on two laptops, two different cables, every usb port. I have tried it with the power cord on, off..with pwnage 4.1 and 4.1.2. Any help?
themoops
themoops - December 16, 2010 at 7:16pm
the instructions say DONT have the power plugged in to the ATV to put it into dfu mode. that's not correct.
eurozmikey
eurozmikey - December 14, 2010 at 1:14am
This does not work It tries to verify with Apple then says you are not able to use this build.
LK
LK - December 8, 2010 at 1:46pm
I have iTunes 10.1 - it attempts to check the firmware update with Apple; gives back error update server can not be reached. Anyone experience similar problem?
goodnbad
goodnbad - November 19, 2010 at 5:49am
Dear all How can i connect Apple TV G2 to the PC? It came with out connection cable and it has only Micro USB port or I can use Ethernet port????
tanker5
tanker5 - January 21, 2011 at 10:13pm
If u happen to have an amazon kindle, use the usb charger cord that came with it (or borrow the cord from a friend who has one). it's a perfect match for the atv2.
Paulc
Paulc - November 14, 2010 at 11:11am
Hi I have a Canadian AppleTV. I've tried to three times to Jailbreak using the above tutorial. These tutorials (ATV1, iPod, iPhone) have always been bullet-proof before, so I must be making a mistake. When I get to the restore part, AppleTV say it is reverting to factory settings, and I end up with an AppleTV at v.4.0, according to the settings menu. Also, it won't update from the AppleTV menu. Is 4.0 a Canadian setting due to the iTunes store/netflix differences here. Any hints? Thanks in advance Paulc
Kelly
Kelly - November 3, 2010 at 9:20pm
After I jailbreak, how can I tell it worked? I don't see Cydia or anything different on the main screen and the software version tells me I'm on 4.0 after I jailbroke with 4.1!?!
Steve
Steve - November 3, 2010 at 10:39pm
Google nitotv and follow the instructions to get their apps, like weather, rss...need to ssh using terminal on mac. Then you'll see the nitotv tab on the atv screen when it reboots
iApple
iApple - November 1, 2010 at 1:54pm
Thanks iClarified, worked flawlessly!!
peterhenley
peterhenley - November 1, 2010 at 5:24pm
cannot get into DFU mode using menu down button.......???
iApple
iApple - November 1, 2010 at 5:35pm
You must hold both the menu & play buttons together at the same time when prompted.
peterhenley
peterhenley - November 1, 2010 at 5:40pm
I did. followed instructions to hold menu and down button for 6 secs, then menu and play button per previous clarified item... but it tells me to press home button ....what is the home button???
iApple
iApple - November 1, 2010 at 6:35pm
You are not following the steps of this well written tutorial. Go back, read everything from beginning to end, understand it... and re-do the process from the beginning. Your answers are all posted in the instructions above. PS. There is no "home button".
peterhenley
peterhenley - November 1, 2010 at 6:47pm
sorry, my pompous friend, but the last panel said press the home button. the pwnage executable is later than the instructions and many panels have been removed. Do not lecture me on what I see with my own eyes.
iApple
iApple - November 1, 2010 at 7:31pm
Sorry for trying to help you locate that "home button" but I'm here for Apple TV. It appears to me you are posting in the wrong jailbreak section of this site. This thread is related to Apple TV ONLY... not iPhone. Read, read, read... ignore pictures, this is not grade 1. Follow the well written instructions of this tutorial (not "panels"). If I recall correctly... it was grade 1 basics which taught me to read, spell and understand what is WRITTEN!! Hope this helps but something tells me it won't. Best of luck to you. Enjoy your day!
peterhenley
peterhenley - November 1, 2010 at 8:22pm
Are there any other folks out there besides this smarty-pants asshole iApple who is having the same issue as I have?
Steve
Steve - November 2, 2010 at 9:34pm
second that peterhenley, there's some real jerks out there......
Peterhenley
Peterhenley - November 3, 2010 at 10:44pm
Duh, i read the instructions again, now it works. There was a previous article about putting atv into dfu mode that said press menu and down for 6 secs, then menu and play for 6 secs....confused me. Now i have nitotv weather etc....
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS