March 28, 2024
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Posted October 31, 2010 at 11:51pm by iClarified
EnglishBulgarianFrenchGermanPortuguese (Brazil)Swedish
Estas são as instruções de como realizar o jailbreak de sua Apple TV 2G no iOS 4.1 usando a PwnageTool para Mac.

Primeiro Passo
Crie uma pasta chamada "Pwnage" em seu desktop. Você irá precisar de algumas coisas dentro dela. PwnageTool 4.1.2, encontrada aqui ou aqui.

Você também irá precisar da firmware 4.1 para Apple TV.
4.1.0: AppleTV2,1_4.1_8M89_Restore.ipsw


Quando realizar o download, considere usar o Firefox, uma vez que o Safari normalmente extrai seu download!
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Segundo Passo
Duplo clique na imagem para montar a PwnageTool e então arraste o ícone da ferramenta para a pasta Pwnage.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Então, da pasta Pwnage, duplo clique para iniciar a ferramenta PwnageTool.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Clique Ok se for apresentado um aviso.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Terceiro Passo
Clique para selecionar o Expert Mode na barra de menu superior
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Quarto Passo
Clique para selecionar sua Apple TV. Uma check-mark irá aparecer sobre a imagem do dispositivo. Clique no botão de seta azul para continuar.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Quinto Passo
Você será levado para a página de busca por sua IPSW ("Browse for IPSW"). Clique sobre o botão Browse for IPSW....
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Da janela popup selecione a firmware da pasta Pwnage e clique no botão Open.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Sexto Passo
Você será levado a um menu com diversas opções. Clique para selecionar General então clique na seta azul para continuar.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

A opção General permite que você decida o tamanho da sua partição.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

A opção Cydia permite que você crie pacotes customizados para que você não tenha que instalá-los manualmente mais tarde. A maioria dos pacotes ainda não estão prontos para a Apple TV então iremos apenas clicar na seta azul para continuar.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

A opção Custom Packages Settings mostra uma lista de ajustes customizados para sua IPSW. Por enquanto deixe estes ajustes como estão. Clique na seta azul para continuar.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Sétimo Passo
Você está pronto para iniciar o processo de pwnage! Clique no botão Build para selecioná-lo e então clique no botão da seta Azul para começar.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Oitavo Passo
Você será questionado sobre onde salvar seu firmware customizado .ipsw. Salve-o dentro da pasta Pwnage criada em sua área de trabalho.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Sua IPSW está em processo de construção. Este processo pode demorar até 10 minutos.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Você será perguntado sobre sua senha de administrador. Entre com a mesma e depois clique no botão OK.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Nono Passo
Uma vez que sua ipsw tenha sido construída você será questionado para conectar sua Apple TV em seu computador. Quando a ferramenta Pwnage Tool detectar seu dispositivo ela irá lhe guiar em como colocar sua Apple TV em modo DFU mode. Para os passos da PwnageTool você não deve conectar seu dispositivo na rede elétrica.

Você será pedido para pressionar e segurar os botões Menu e Play por 7 segundos.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Uma vez que sua Apple TV esteja em modo DFU, a ferramenta PwnageTool irá perguntar-lhe para iniciar o iTunes.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Décimo Passo
No iTunes, segure a tecla Alt/Option e clique em Restore.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Décimo-primeiro Passo
Navegue até a pasta Pwnage em seu desktop usando a caixa de diálogo que irá aparecer. Selecione a IPSW customizada que foi criada e clique no botão Choose.
Como realizar o Jailbreak de sua Apple TV 2G usando a PwnageTool (Mac) [4.1]

Décimo-segundo Passo
O iTunes irá restaurar a firmware para sua Apple TV. Este precesso pode demorar até 10 minutos. Quando terminado o dispositivo será reinicializado no iOS 4.1 jailbroken!

Atualmente não existem aplicativos no Cydia para sua Apple TV, então você deverá conectar manualmente através do SSH. Você poderá encontrar seu endereço IP em Settings:General:Network. O nome de usuário é root e a senha é alpine.


***SUGESTÕES:
Se você se deparar com o erro 1600, ou similar, enquanto tentando restaurar para uma firmware customizada no iTunes tente uma as seguintes sugestões.
- Certifique-se que esteja usando a versão mais recente da PwnageTool ex.: 4.1.2
- Certifique-se de estar usando o iTunes 10.0.1
- Tente uma porta USB, um cabo ou um computador diferente
- Finalize o iTunes e o iTunes Helper antes de entrar em modo DFU

***AGRADECIMENTOS: Obrigado ao Geohot e ao Dev-Team pelo seu trabalho duro em tornar este jailbreak e tutorial possíveis! Um obrigado especial ao MuscleNerd por nos ajudar a solucionar alguns problemas iniciais na realização deste jailbreak.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (27)
You must login or register to add a comment...
Zeljko
Zeljko - January 24, 2011 at 5:23pm
Please if somebody have time please try yesman`s method. Maybe will do the job. Please leave comments did you make it or not....Thanks
te72s
te72s - January 23, 2011 at 9:14pm
You need to make sure PwnageTool has the newest bundle, this should resolve the issue. 4.2.1 Firmware Bundle
cwf
cwf - January 21, 2011 at 9:00pm
I've gone through this several times, I opt-click on restore, pick my customer ipsw, iTunes extracts it, starts to verify, then tells me "this device isn't eligible for the requested build." When I click on more information it looks like the error I'm getting is 3194. Any thoughts on where I'm going wrong?
Tom
Tom - January 22, 2011 at 3:49pm
Me too. Works with Seas0nPass, but then I have to boot tethered. This gets to Step 12 in the tutorial and then says (exactly as yours does), that it "isn't eligible for the requested build"
Eagletooth
Eagletooth - June 29, 2011 at 3:18am
I'm getting the same dialogue: "This device isn't eligible for the requested build." :(
Zeljko
Zeljko - January 12, 2011 at 3:01am
I have try this tutorial 100 times and it didn`t work for me. I did everything propertly but i failed every time. And i am on 4.1 apple tv 2g
webphil75
webphil75 - March 14, 2011 at 11:16am
Hello, Impossible to pass DFU, i tried several times. Does somebody find a solution? (I french not to much help in french) Thanks
kwans
kwans - January 3, 2011 at 6:09pm
I have an apple tv but I don't know why I need to jailbreak an apple tv. Can u guys tell me benefits after jailbreaking? Can I get free movies or tv shows?
ricekake
ricekake - December 29, 2010 at 1:45am
OK...so I just got my ATV and I am getting the same message that it will not support the build. I have tried it on two laptops, two different cables, every usb port. I have tried it with the power cord on, off..with pwnage 4.1 and 4.1.2. Any help?
themoops
themoops - December 16, 2010 at 7:16pm
the instructions say DONT have the power plugged in to the ATV to put it into dfu mode. that's not correct.
eurozmikey
eurozmikey - December 14, 2010 at 1:14am
This does not work It tries to verify with Apple then says you are not able to use this build.
LK
LK - December 8, 2010 at 1:46pm
I have iTunes 10.1 - it attempts to check the firmware update with Apple; gives back error update server can not be reached. Anyone experience similar problem?
goodnbad
goodnbad - November 19, 2010 at 5:49am
Dear all How can i connect Apple TV G2 to the PC? It came with out connection cable and it has only Micro USB port or I can use Ethernet port????
tanker5
tanker5 - January 21, 2011 at 10:13pm
If u happen to have an amazon kindle, use the usb charger cord that came with it (or borrow the cord from a friend who has one). it's a perfect match for the atv2.
Paulc
Paulc - November 14, 2010 at 11:11am
Hi I have a Canadian AppleTV. I've tried to three times to Jailbreak using the above tutorial. These tutorials (ATV1, iPod, iPhone) have always been bullet-proof before, so I must be making a mistake. When I get to the restore part, AppleTV say it is reverting to factory settings, and I end up with an AppleTV at v.4.0, according to the settings menu. Also, it won't update from the AppleTV menu. Is 4.0 a Canadian setting due to the iTunes store/netflix differences here. Any hints? Thanks in advance Paulc
Kelly
Kelly - November 3, 2010 at 9:20pm
After I jailbreak, how can I tell it worked? I don't see Cydia or anything different on the main screen and the software version tells me I'm on 4.0 after I jailbroke with 4.1!?!
Steve
Steve - November 3, 2010 at 10:39pm
Google nitotv and follow the instructions to get their apps, like weather, rss...need to ssh using terminal on mac. Then you'll see the nitotv tab on the atv screen when it reboots
iApple
iApple - November 1, 2010 at 1:54pm
Thanks iClarified, worked flawlessly!!
peterhenley
peterhenley - November 1, 2010 at 5:24pm
cannot get into DFU mode using menu down button.......???
iApple
iApple - November 1, 2010 at 5:35pm
You must hold both the menu & play buttons together at the same time when prompted.
peterhenley
peterhenley - November 1, 2010 at 5:40pm
I did. followed instructions to hold menu and down button for 6 secs, then menu and play button per previous clarified item... but it tells me to press home button ....what is the home button???
iApple
iApple - November 1, 2010 at 6:35pm
You are not following the steps of this well written tutorial. Go back, read everything from beginning to end, understand it... and re-do the process from the beginning. Your answers are all posted in the instructions above. PS. There is no "home button".
peterhenley
peterhenley - November 1, 2010 at 6:47pm
sorry, my pompous friend, but the last panel said press the home button. the pwnage executable is later than the instructions and many panels have been removed. Do not lecture me on what I see with my own eyes.
iApple
iApple - November 1, 2010 at 7:31pm
Sorry for trying to help you locate that "home button" but I'm here for Apple TV. It appears to me you are posting in the wrong jailbreak section of this site. This thread is related to Apple TV ONLY... not iPhone. Read, read, read... ignore pictures, this is not grade 1. Follow the well written instructions of this tutorial (not "panels"). If I recall correctly... it was grade 1 basics which taught me to read, spell and understand what is WRITTEN!! Hope this helps but something tells me it won't. Best of luck to you. Enjoy your day!
peterhenley
peterhenley - November 1, 2010 at 8:22pm
Are there any other folks out there besides this smarty-pants asshole iApple who is having the same issue as I have?
Steve
Steve - November 2, 2010 at 9:34pm
second that peterhenley, there's some real jerks out there......
Peterhenley
Peterhenley - November 3, 2010 at 10:44pm
Duh, i read the instructions again, now it works. There was a previous article about putting atv into dfu mode that said press menu and down for 6 secs, then menu and play for 6 secs....confused me. Now i have nitotv weather etc....
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS