March 29, 2024
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

Posted February 16, 2011 at 3:13am by iClarified
EnglishGreekPersianSpanish


آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) با قابلیت فعال سازی و عدم تغییر بیس بند با استفاده از برنامه PwnageTool ۴.۲ برای مک

قدم اول
جهت راحتی و جلوگیری از عدم اشتباه یک فولدر با نام Pwnage روی دسک تاپ بسازید.
برنامه PwangeTool_4.2 را از لینک زیر دانلود نمایید.

here or here.


فیرم ویر 4.2.1 برای آیفون 3Gs را از لینک زیر دانلود نمایید.
4.2.1 (3GS): iPhone2,1_4.2.1_8C148a_Restore.ipsw

نکته: اگر از سافاری برای دانلود استفاده میکنید حتما از قسمت Preferences گزینه Open Safe file را خاموش کنید تا بعد از دانلود IPSW باز نشود.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم دوم
برنامه PwnageTool و فیرم ویر دانلود شده را داخل فولدر Pwnage قرار دهید و برنامه PwnageTool_4.2.dmg را اجرا نمایید تا Mount شود.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

بعد از Mount شدن PwnageTool را اجرا نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

با مشاهده پیغام زیر روی Ok کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم سوم
از منو بار بالا روی Expert Mode کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم چهارم
از صفحه نمایش داده شده دستگاه مورد نظر خود که iPhone3G,iPhone3Gs,iPhone4می باشد را انتخاب نمایید و بر روی دکمه آبی رنگ پایین صفحه کلیک نمایید تا به مرحله بعد بروید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم پنجم
بر روی Browse for IPSW کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

از صفحه باز شده فیرم ویر 4.2.1 برای آیفون 3Gs را که دانلود کرده اید را انتخاب و گزینه Open را کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم ششم
در صفحه ای باز شده General را انتخاب و فلش آبی رنگ پایین صفحه را کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

اگر آیفون شما لاک می باشد حتما چک نمایید Activate the phone فعال باشد و اگر آیفون شما آنلاک فکتوری می باشد گزینه Activate the phone را غیر فعال نمایید سپس با کلیک بر روی فلش آبی رنگ به صفحه بعد بروید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

در این قسمت وارد نتظیمات سیدیا می شوید. در این قسمت کاری انجام ندهید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

در صفحه باز شده Download Packages را انتخاب نمایید و گزینه Refresh را کلیک نمایید تا پکیج هایی در این صفحه به شما نمایش داده شود. گزینه OpenSSH را انتخاب نمایید و منتظر بمانید تا دانلود شود. بعد از دانلود فلش آبی رنگ را کلیک نمایید تا به صفحه بعد بروید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

در این صفحه OpenSSH را تیک زده و جهت ادامه فلش آبی را کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

در صفحه Custom Packages Settings گزینه Cydia را انتخاب نمایید و فلش آبی رنگ را برای رفتن به صفحه بعد کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم هفتم
اکنون جهت ساختن یک فیرم ویر کاستوم که جیلبریک شده و برنامه سیدیا را نیز دارد گزینه Build را انتخاب و باز فلش آبی رنگ را کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم هشتم
اکنون این برنامه قصد ساختن یک فیرم ویر کاستوم با پسوند .ipsw دارد آدرس محلی که قصد ساختن و ذخیره آنرا دارید انتخاب و گزینه save را بزنید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

برنامه شروع به ساختن فیرم ویر کاستوم خواهد کرد. این مرحله معمولا از ۵ تا ۱۰ دقیقه طول خواهد کشت.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

اگر مک شما پسورد دارد هنگام ساخت فیرم ویر کاستوم پسورد مک را از شما می پرسد.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم نهم
بعد از ساخت فیرم ویر کاستوم این برنامه به شما کمک خواهد کرد تا دستگاه شما به DFU برود. برای اینکار دستگاه خود را خاموش نمایید و با USB به کامپیوتر متصل نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

دکمه Power و Home را همزمان با هم برای ۱۰ ثانیه نگهدارید. (البته خود برنامه این شمارش را برای شما انجام می دهد.)
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

بعد از گذشت ۱۰ ثانیه و دیدن پیغام زیر همچنان که Home را نگه داشته اید دکمه Power را رها نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

گر مراحل بالا را درست انجام داده باشید دستگاه شما به DFU می رود و پیغام زیر به شما نمایش داده خواهد شد و همزمان با آن iTunes پیغام آماده بودن دستگاه برای Restore کردن فیرم ویر را نمایش میدهد. (اگر مراحل بالا را درست انجام نداده باشید از شما می خواهد دوباره اینکار را انجام دهید.)
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم دهم
در برنامه iTunes باز شده کلید Alt/Option را از روی صفحه کلید نگه داشته و گزینه Restore را کلیک نمایید.
آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم یازدهم
در پنجره ای که باز شده فیرم ویر کاستومی که ساخته اید را انتخاب و گزینه Choose را کلیک نمایید. آموزش ساخت و جیلبریک یک فیرم ویر کاستوم iOS4.2.1 برای آیفون 3Gs (لاک) بدون تغییر

قدم دوازدهم
اکنون دستگاه شما اقدام به نصب فیرم ویر ۴.۲.۱ بر روی دستگاه شما خواهد نمود که بعد از نصب این فیرم ویر دستگاه شما جیلبریک خواهد بود و می توانید با اجرای برنامه Cydia فایلهای مورد نیاز را دانلود نمایید.


ترجمه شده توسط سید محمد مهدی موسوی وبلاگ اپلستان
http://www.applestan.com/

Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (67)
You must login or register to add a comment...
Rands
Rands - July 20, 2011 at 5:23pm
Please help! I was following this tutorial and got to the last step, as I was restoring it in itunes I kept getting the following message: "The iPhone cannot be restored at this moment because the iPhone software update server could not be contacted or is temporarily unavailable" Now I'm stuck in DFU mode, what should I do?? :(
Tony
Tony - July 20, 2011 at 5:33pm
Hold the home and power buttons till you see the apple icon.
Rands
Rands - July 20, 2011 at 7:02pm
Okay, I just rebooted it using blackra1n and it's working again. It's still tethered and running on the old iOS, but at least I got my phone back and didn't lose any of the info. Guess I'll just stick to 3.1.2.
Pat_O
Pat_O - April 4, 2011 at 3:35pm
Hi All, Great work Dev Team. Now my question was, I created a custom restore(using PwnageTool) for my iPhone3G 4.2.1 and managed to jailbreak it. The problem that I now have is, both wi-fi and bluetooth are not functioning. For example, wi-fi has address but doesn't pick up any signals. I have tried to re-jailbreak but still get the same problem. what solution can you recommend?
dragonmorphs
dragonmorphs - March 12, 2011 at 9:14pm
So I just went through all the steps and when I went to restore the Custom_Restore, I got a message from iTunes "The iPhone "iPhone could not be restored. This decise isn't eligible for the requested build." What to do? My iphone is 4.2.1, BB 5.15.04, bought unlocked. My macbook I used is up to date and so is my iTunes... could that be the reason?
david
david - March 18, 2011 at 12:13pm
i get the same error message with my factory unlocked 3gs!
dragonmorphs
dragonmorphs - March 18, 2011 at 10:38pm
Yeaaa. I think it's 'cause we don't have SHSH (well i didn't save any with TU) and Apple isn't allowing anymore 4.2.1.... i think
david
david - March 19, 2011 at 8:00am
i checked out greenpoison, and it worked, and apart from that its much easier :-)
Miguel
Miguel - April 2, 2011 at 5:31pm
I just ran into the same error trying to upgrade from 4.0 to 4.2.1. How did you guys resolve it? Thanks!
iHacker
iHacker - March 4, 2011 at 4:49pm
To all queries regarding BB 06.15.00 : worked Wonderfully!! Successfully "Un-tethered" my previously jailbroken tethered device! NO issues/bugs whatsoever! iPhone 3G [S] with NEWER bootrom previously jailbroken but TETHERED on iPad baseband 06.15.00 on iOS 4.2.1. Here's what you do: 1.0 Just follow the above given procedure (Step by Step). 2.0 If error 16xx is encountered in iTunes during restore, don't worry, DO NOT TOUCH the iPhone (leave it on DFU mode plugged in) and RESTART the computer. 3.0 Open iTunes (if not automatically) and repeat the "Option-Restore" process. This should do the trick and voila!!, you just got yourself an UNTETHERED Jailbreak!
jo-b
jo-b - March 14, 2011 at 9:10am
Hi, the Mac-Restart doesn't solve the problem here. iTunes always gives the message: "The iPhone cannot be restored, because the iPod-Updateserver[!!] isn't available yet." or "Restoring is not possible" (>> both free translated from german.) Restoring from the old (4.1) ipsw is also not possible. Are there any other ideas out there? tia jo-b -- iPhone 3GS, MBP 10.6.6, iTunes 10.2.1
claudia
claudia - March 3, 2011 at 7:13pm
I made it, thank you sooo much! It worked the second time y tried.
T1m
T1m - February 25, 2011 at 4:28am
So if I'm officially unlocked and I only want the jb, can I update my bb. Or should I stick with 05.13.04?!? Thanks
Jigar Doshi
Jigar Doshi - February 24, 2011 at 2:17pm
hi im currently using iphone 3gs 4.2.1 jailbroken through redsn0w and then have run ipad baseband to upgrade the baseband and unlocked using ultrasn0w. now my iphone is working but evertime by battery goes off, i have to connect iphone to redsn0w and then boot the phone. i am confused will the help? will i need to connect to redsn0w everytime when battery goes off?
windows version
windows version - February 22, 2011 at 10:29pm
do you have a windows version? i found sn0wbreeze and says its like Pwnage Tool for windows. is it safe to use it? I only trust tools posted on iclarified.com Thanks.
Jess
Jess - February 22, 2011 at 12:43pm
Hi I have a 3gs bb 05.12.01 I followed all the steps below but when restoring I get the 1611 error, I allready tried to plug and unplug iphone but in the screen with the apple logo and scroll band it never starts loading... and then gives me the error, any idea why??
Tony
Tony - February 22, 2011 at 10:30pm
Did you install Tinyumbrella or change your hosts file?
T1M
T1M - March 15, 2011 at 4:46am
Have you tried re-pwnage the firmware. Best download the firmware restore again and create another custom firmware. Worked for me. I was stuck on apple logo and connect to iTunes. Believe it was the same error! GL
Ryan C Lee
Ryan C Lee - February 21, 2011 at 9:43pm
Hey All I'm in Buenos Aires using 'Personal'! So I JB/unlocked the my iPhone 3GS (Version 4.2.1 (8c148a) Modem Firmware:06.15.00) using the redsn0w application, and then within Cydia I used ultrasn0w to unlock the phone. This worked, however i could only tether the jailbreak and therefore was unable to turnoff or reboot, which was fine until I let the battery die. After repeating the steps, I was only able to receive phone calls/ text messages (however i could call to check my phone balance, and when i friend call she told me she received a message for Personal saying I was trying to contact her). So I found this site, followed the directions (except I downloaded Ultrasn0w through custom packages and now Cydia because it wasn't working). 3rd time it worked! I'm now able to turn my phone on and off without having to re-tether. BUT, I'm still only receiving texts and calls???? Do you'll think it is a phone company issue?
claudia
claudia - March 3, 2011 at 5:04pm
Hey there!, Im now in Buenos Aires, and i had my iphone working perfectly, but i updated de iphone trhough Itunes and now it's block or something. Th screen only shows the connect to itunes image. I follow the steps here but it didn;t work it says error (21). Help please!!
Ryan Lee
Ryan Lee - March 3, 2011 at 5:08pm
I believe the update might have killed your chances (unless you updated it using the update provided above. If not, keep trying! It took me 4 or 5 times to get it to work! suerte!
claudia
claudia - March 3, 2011 at 5:20pm
thanks! i'll kee p trying a friend from cr told me that it can be unlock, it's just not too easy
Shasudi
Shasudi - February 20, 2011 at 11:45pm
I have iPhone 3GS running 4.01 with baseband 5.13.04 and it is not carrier unlock. Can I use PwnageTool to jailbreak and activate the phone and also unlock ? Somebody please help me
Tony
Tony - February 21, 2011 at 10:55pm
Yes. Use Pwnagetool in expert mode to jailbreak and activate and then once you have jailbroken your phone, run cydia and install ultrasn0w to unlock. Do not select update baseband!!!
Shasudi
Shasudi - February 22, 2011 at 1:36am
Thanks Tony I followed the tutorial and it is activated. But the problem is that Cydia crashes and I cannot unlock it. Any solution. Please help.
Tony
Tony - February 22, 2011 at 8:46am
Have you tried rebooting? Turn off your phone and restart it.
yaman
yaman - February 22, 2011 at 10:23pm
Same thing happened to me when I tried using Pwnage. I tried 4 times and rebooting wouldn't do anything for me. I used GreenpoisOn and it worked perfect. I had 3GS on 4.0.1 with baseband 5.13.04 upgraded to 4.2.1 and kept my baseband. Cydia started right away and unlocked.
Shasudi
Shasudi - February 22, 2011 at 11:57pm
Thank you, What I did was I have installed Cydia Installer from Custom packages and not from General. It is working fine.
caue
caue - February 20, 2011 at 7:21pm
the tutorial for windows tells that, to make the download of greenpois0n (gp_win_rc5_b2.zip). however, when i click at the windows link the file is different! (gp_win_rc6.1.zip). and it's not working to jailbreak my iphone. does anyone know why?? thks.
Jakub
Jakub - February 20, 2011 at 3:39pm
Guys what about all the people who jailbreaked previously with upgrading baseband to 6.15? Can we use this to get rid of the tethered jailbreak and unlock with Ultrasnow? Please I'm waiting for this desperately, anyone knows?
Rodoga
Rodoga - February 19, 2011 at 5:47pm
Can I use a custom ipsw from this release, with the earlier redsnow release for Windows (direct to DFU mode)? I don't want to upgrade my baseband.
escdotdot
escdotdot - February 19, 2011 at 8:37am
I have a 3GS on v4.0 (8A293) and firmware 05.11.07. Should I let iTunes upgrade me before running this PwnageTool? Thanks for your help!
Tony
Tony - February 19, 2011 at 6:48pm
Dont use itunes to update if you need to unlock. Pwnagetool helps you keep your current baseband if you are using ultrasn0w. If you do not need the unlock, then you can update through itunes and use greenpois0n to jailbreak.
escdotdot
escdotdot - February 20, 2011 at 1:01am
Thanks Tony, All went well with the jailbreak, but I think I made a mistake by trying to use blackra1n to unlock. Now the phone restarts and cannot get past the apple logo, and gives an error type 21 when I try to restore. I guess I should have used ultrasn0w. Any idea how to reset the iphone so I can start again?
escdotdot
escdotdot - February 20, 2011 at 3:03am
UPDATE: by following the above instructions again (this time to the letter) I was able to reboot the iPhone and from there install ultrasn0w and get everything working again. fan-bloody-tastic! Heartfelt thanks to all the contributors!
Zeljko
Zeljko - February 18, 2011 at 5:24pm
work like a charm.... Thanks guys
yaman
yaman - February 18, 2011 at 8:22am
I have 3GS with 5.13.04, I followed all the steps exactly as they say. Once I try to restore with custom fw in itunes the phone is stuck with the apple logo and the progress bar almost at the end. I've waited over an hour and nothing. Would anyone no why? Thanks for you help!
yaman
yaman - February 22, 2011 at 10:28pm
Figured it out, I used greenpoisOn instead of pwnage and it worked like a charm.
resho
resho - February 17, 2011 at 5:19pm
well, i made all these steps but whem restoring to the custom fw itunes give me error 1600 can any one help please
Ecua4ever
Ecua4ever - February 18, 2011 at 12:06pm
Just unplug your iPhone and plug again then press alt and select custom firmware and try again
Jess
Jess - February 22, 2011 at 12:52pm
Same problem here... tried to unplug and choose custom firmware again, still gtting the same answer, error 1611... The scroll bar below the apple logo never starts loading. HELP!!!
T1M
T1M - March 15, 2011 at 4:50am
Have you tried re-pwnage the firmware. Best download the original restore again and recreate the custom firmware. and try again Worked for me.
rodney
rodney - February 17, 2011 at 9:58am
i am using an iphone 4 with 4.2.1 and after i create custom ipsw and restore it in itunes i doesn't complete and gives me an error 21. anyone know why?
Tony
Tony - February 17, 2011 at 4:27pm
This is for iPhone 3GS, not iPhone 4.
claudia
claudia - March 3, 2011 at 5:07pm
Same happend to me error21
gerisgame
gerisgame - February 17, 2011 at 4:45am
After build 3GS 4.2.1 custom ipsw and put iphone to dfu mode, by Pwnage and Opt-Restore in iTunes, I meet error in iPhone: firmware not compatible. What is my problem? help please!!!
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS