March 28, 2024
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

Posted October 18, 2011 at 8:04am by iClarified
EnglishItalianPersianSpanish

این مقدمه ای است بر چگونگی جیلبریک کردن آیفون 3GS دارای فریمور 5.0 با استفاده از RedSn0w نسخه ویندوز. آموزش مربوط به نسخه مک آنرا در اینجا ببینید.

این روش باعث به روز شدن baseband دستگاه شما و از دست دادن شانس دوباره برای unlock شدن آن خواهد شد. در صورتی که دستگاه شما بعد از جیلبریک نیاز به unlock شدن دارد لطفا صبر کنید تا ما آموزش چگونگی به روز رسانی به فریمور 5.0 را با استفاده از یک فریمور سفارشی در سایت قرار دهیم. این نوع جیلبریک برای تمامی دستگاه ها به جز آیفون 3GS با بوت روم قدیم بصورت ناپایدار عمل میکند. به عبارت دیگر با هر بار راه اندازی مجدد (بوت کردن) دستگاه، باید آنرا به رایانه متصل کرده و از RedSn0w برای بالا آمدن مجدد دستگاه استفاده کنید. در هر صورت جهت رعایت احتیاط و دارا شدن امکان بازگشت به فریمور سابقتان باید SHSH Blobs خود را با استفاده از این روش ذخیره نمایید.

اگر میخواهید فریمور نسخه پایینتری را جیلبریک کنید آموزش آن را در اینجا میتوانید مشاهده کنید.


مرحله اولe
یک پوشه روی دستکتاپ خود به نام Pwnage بسازید.

RedSn0w 0.9.9b6 را از اینجا دانلود کرده و آنرا درون پوشه Pwnage که قبلا ساختید قرار دهید.
به همین ترتیب، فریمور 5.0 را نیز از اینجا دانلود کرده و در پوشه Pwnage قرار دهید. (نکته: اگر فریمور شما هم اکنون 5.0 میباشد نیازی به دانلود آن ندارید)

RedSn0w را که بصورت zip دانلود شده را با روشی که در زیر گفته شده از حالت فشرده خارج کنید. چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله دوم: (در صورتی که فریمور 5.0 روی دستگاهتان نصب است نیازی به این مرحله ندارید)
آیفون خود را به رایانه متصل کرده و آی تیونز را اجرا کنید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

آیفون خود را از لیست دستگاه ها از سمت چپ انتخاب کنید. سپس کلید Shift را فشار داده و روی دکمه Restore کلیک کنید. ریستور از شما آدرس فریمور دانلود شده را خواهد خواست.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

به پوشه Pwnage که روی دسکتاپ خود ساختید وارد شده و فایل ipsw مربوط به فریمور 5.0 را انتخاب کرده، سپس روی دکمه Choose کلیک کنید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

اکنون آی تیونز شروع به به روز رسانی آیفون شما به فریمور جدید میکند.

مرحله سوم
برنامه redsn0w را از پوشه آن که قبلا از حالت فشرده در آورده بودیم اجرا کنید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

** کاربرانی که از ویندوز 7 استفاده میکنند ممکن است نیاز به اجرای این برنامه در حالت administrator و در مد سازگار با ویندوز ویستا داشته باشند. شما میتوانید با راست کلیک روی فایل اجرایی برنامه و انتخاب Properties از منویی که برای شما ظاهر خواهد شد اینکار را انجام دهید.

مرحله چهارم
بعد از اینکه RedSn0w باز شد روی دکمه Jailbreak کلیک کنید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله پنجم
آیفون خود را به رایانه متصل کرده و بعد از اینکه از خاموش بودن آن اطمینان حاصل کردید روی دکمه Next کلیک کنید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله ششم
RedSn0w چگونگی بردن دستگاه روی مد DFU را به شما نشان میدهد. آموزش کامل و جامع مد DFU را از اینجا میتوانید مشاهده کنید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

دکمه های Home و Power را به مدت 10 ثانیه همزمان فشار دهید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

دکمه Power را رها کرده ولی همچنان بر روی دکمه Home فشار دهید تا RedSn0w دستگاه شما را بشناسد.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله هفتم
آیفون شما بوت خواهد شد.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله هشتم
RedSn0w داده های مربوط به جیلبریک را آماده سازی میکند.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله نهم
از لیست انتخاب هایی که دارید Cydia را علامت زده و روی Next کلیک کنید.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله دهم
آیفون شما دوباره راه اندازی خواهد شد و RedSn0w شروع به ارسال داده های RAM Disk و Kernel بر روی آن خواهد کرد.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله یازدهم
وقتی ارسال داده ها نیز تمام شد RedSn0w با دکمه done را به شما نشان خواهد داد. وقتی آیفون شما (بعد از حدود 5 دقیقه) راه اندازی شد، شما اکنون یک دستگاه جیلبریک شده به همراه Cydia خواهید داشت.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

بوت ناپایدار
حالا با هر بار بوت دستگاه شما نیاز به رجوع به redsn0w جهت راه اندازی مجدد خواهید داشت.

مرحله یکم
از منوی اصلی RedSn0w روی دکمه Extras کلیک میکنیم.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

مرحله دوم
از انتخابهای پیش رو Just boot را فقط برای راه اندازی مجدد انتخاب میکنیم.
چگونه آیفون 3GS دارای فریمور 5.0 خود را با RedSn0w (نسخه ویندوز) جیلبریک کنیم؟

* با تشکر ویژه از گروه iPhone Dev-Team وGeohot که با تلاش مستمر خود این لطف را به دوستداران آیفون دارند.

Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (42)
You must login or register to add a comment...
Spencer Haley
Spencer Haley - April 9, 2013 at 1:03pm
Do I have to upgrade iPhone 3GS from 5.0 to 5.01 in order to get the untethered jailbreak? Thanks, SanDiegoSEO@SpencerHaley.com
jagy
jagy - December 6, 2011 at 12:44am
error 3194 keeps coming when i try restoring to 5.0 on itunes
rivet
rivet - November 22, 2011 at 5:43pm
Does this works for ios 5.0.1?
Rob
Rob - November 11, 2011 at 7:03am
I have a 3gs on 4.0 custom ipsw, and on baseband 5.11.07, and unlocked, can I jailbreak update to 5.0.1 and keep my baseband and unlock?
sebastian142
sebastian142 - November 9, 2011 at 8:55am
Hi, after jailbreaked me iphone 3gs ios 5.0 all was work well. But after a few days the phone started to reset itself, this is so annoying that it happens several times a day. Please, any advice how to prevent it.
Tina
Tina - November 8, 2011 at 10:32pm
Hi, Does anyone knows if I can upgrade to iOS 5 if I have an iPhone 3GS running 4.3.5 on BB 5.12.02 (newboot)? Thanks in advance
Rajesh
Rajesh - November 3, 2011 at 12:11pm
Excellent
long
long - November 3, 2011 at 5:51am
dear all, I've just successfully updated my iphone 3gs to ios 5, but the issue is that " after installed ultrasnow, the sim still could not recognize". Has anyone ever faced up with this problem? please share me your experience. Thank in advance.
Victor
Victor - October 28, 2011 at 1:47pm
Will redsn0w autodetect my bootrom version?
Josh
Josh - October 27, 2011 at 2:43pm
Can anyone comment on the Battery Life and performance on a Old Bootrom 3GS? Thanks
sudnep
sudnep - October 23, 2011 at 2:17am
hey guys i got a problem , i have 3gs with old bootrom, i used the custom firmware made by (sn0wbreeze-v2.8b8), using windows 7, then i used that custom firmware to shift restore using itunes. Then everything went well. Then device started i was using t-mobile, which it cannot activate then i used (redsn0w_win_0.9.9b6). but when i select the custom firmware made by snowbreeze it says, firmware not recognised. Then i used STOCK firmware and which was identified, and proceed the jailbreak with that. along with jailbreak i selected install ipad baseband and hactivate. But when the process finished. i still have to go through the activation process using authorised sim. Also i tried the methods to buypass the activation by dailing 112 in emergency call. if worked couple of times. then screen would go black and again i was out of phone. I also tried using three fingers to swipe in the emergency call windows while voice over is active. but the notification bar did not appear. The bottomline is i cannot get into my phone using t-mobile simcard. Any help is appreciated?
Tina
Tina - October 23, 2011 at 12:24am
Hi, Does anyone knows if I can upgrade to iOS 5 if I have and iPhone 3GS running 4.3.5 on BB 5.12.02 (new version)? Thanks in advance
long
long - October 22, 2011 at 9:42am
Hi everyone!!! I've already jailbreak my iphone 3gs, but it stuck on the apple boot logo. Please kindly help me to solve this problem!!!! Thank in advance!!
Adddddddddam
Adddddddddam - October 19, 2011 at 9:10am
works fanstasic, use sn0wbreeze to create ipsw to safe bb, then use redsn0w to boot into dfu (extra's then pwnmode) itunes to restore (itunes 10.5) shift and restore and then restore and then jailbreak and then boot teathard (booo lol!) working fine.
Tina
Tina - October 22, 2011 at 11:58pm
Which iPhone do you have? And which baseband and iOS you updated to 5? Thanks
Addddddddddddddddddddddam
Addddddddddddddddddddddam - October 28, 2011 at 10:49am
iPhone 3GS, Baseband 5.13.04.
Matt
Matt - October 19, 2011 at 5:36am
For those having any issues with the SIM Card, check out the following: http://forums.tipb.com/ios-5-forum/220740-jailbroken-3gs-upgraded-ios-5-now-no-service-no-sim.html Hope this helps!
vendo
vendo - October 18, 2011 at 8:35pm
I had a perfectly working unlocked and jailbroken iPhone 3GS, but of course I had to go ahead and try to get iOS5 on it. I didn't know I need to preserve my baseband while updating it, so now ultrasn0w will not unlock it for me and I'm left without a phone line. Is there any way to unlock an iPhone 3GS with 05.16.05 baseband? If not, is there any expected change that will allow me to do so?
Kev
Kev - October 18, 2011 at 9:16pm
The supported basebands for the iPhone 3G and 3GS are 04.26.08, 05.11.07, 05.12.01, 05.13.04, and 06.15.00. The baseband supported for the iPhone4 is 01.59.00. (from the Dev teams website, I dont think that there will be support for any other basebands just yet, especially not for the 3Gs, as we have been waiting for that for over a year. I just upgraded, jailbroke and unlocked my 3Gs and had to put in the ipad baseband, I just this minute did it, all seems to be working ok, but I cant vouch for the GPS at the moment until I try it tomorrow .. there have been reports that the ipad baseband messes up the gps
Kev
Kev - October 18, 2011 at 9:18pm
But an iPhone without GPS is better than an iPhone that doesnt make calls ...
Kev
Kev - October 18, 2011 at 9:20pm
Just checked GPS on maps and it pinpointed me exactly, so i will take that as GPS working for me.
Kev
Kev - October 18, 2011 at 6:50pm
Quick question 3Gs on 06.15.00 baseband, I already upgraded to iOS5 with sn0wbreeze and unlocked with ultrasnow, and although the phone is working fine, everynow and then the signal drops, and I loose wifi, then a few seconds later it comes back My question, if I jailbreak again with redsn0w, as I am on 06.15.00, will I still be able to unlock with Ultrasn0w Thanks in advance for your help Billy
Kev
Kev - October 18, 2011 at 9:22pm
Update. Just updates to iOS5 following the tutorial here, ipad baseband, all working fine, no calls dropping, and GPS seems to be working now.
planka
planka - October 18, 2011 at 6:11pm
Could anyone please feedback on this is working or not? "The jailbreak is also tethered for all devices except the old bootrom iPhone 3GS.... " Does it get untethered? Any other problems? Is it slow on a 3gs?
long
long - October 18, 2011 at 3:42pm
Dear jailbreaker!! my phone is Iphone 3gs, and it is on the old bootrom. The question is that Can I still update my phone to ISO 5? and another problem is that I always encounter with error 3194 while I'm trying to restore 4.3.3 as well as 4.3.5. Can u solve this problem for me? In fact, I am very appreciate with Iphone dev-team that always provide the features for all iphone user! Hopefully, You'll solve and reply me asap. Thank in advance!!!
George
George - October 18, 2011 at 4:47pm
1. Add the following entries into your Windows hosts file: this is c:\windows\system32\drivers\etc\hosts 74.208.105.171 gs.apple.com 74.208.10.249 gs.apple.com 2. Download your ipsw file. (Mine was iPad 1 4.2.1) 3. Go to Tinyumbrella and download their Fixrecovery file. (2 are provided 4.2.1 and 4.3 – use according to the OS you downloaded from IPSW step 2) 4. Run the device in DFU mode and run the Fixrecovery. 5. Open iTunes and place your device in restore mode (Hold Home buton and power together for abou 20 to 30 seconds) 6. Hold Shift key and click on Restore. Search for your ipsw file you downloaded and sit back and wait till it finishes. You’ll experience 16xx errors use iREB and than Open iTunes and Hold Shift key and click on Restore search youtube for videos on how is done
Waqas
Waqas - October 18, 2011 at 5:49pm
put your phone into recovery mode then connect with itunes and press restore it will update your phone to ios 5.
Long
Long - October 19, 2011 at 4:50am
Thz you very much for your infomation, George!! Hopefully, I can update it successfully for this time!!! :)
Long
Long - October 19, 2011 at 4:52am
Thz you Waqas!! :)
vendo
vendo - October 18, 2011 at 3:19pm
Folks it is not working, 3GS, ISO - iPhone2,1_5.0_9A334_Restore.ipsw , entered phone into DFU mode but redsnow is not working, telling me that he can`t download IPSW and I should check internet. help
vendo
vendo - October 18, 2011 at 3:28pm
after DFU program is processing and then " Error woth SHSH blobs!" " Couldn`t download required IPSW" I have alread iOS 5 restored
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS