March 29, 2024
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

Posted May 25, 2012 at 1:54pm by iClarified
EnglishArabicFrenchPortuguese (Brazil)Spanish

هذه التعليمات حول كيفية عمل الجيلبريك الغير مقيد للأيباد IOS 5.1.1 بإستخدام Absinthe لأجهزة الوندوز

تحذير***: قبل المتابعة يجب التأكد من أخذ نسخة احتياطية لجهازك من الأيتونز فقد تفقد الكاميرا رول ( الصور ) أثناء هذه العملية




الخطوة الأولى
قم بتحميل آخر نسخة من Absinthe تجده هنا.

الخطوة الثانية
قم بفك ضغط المجلد الذي قمت بتحميله
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

الخطوة الثالثة
أنقر مرتين على ملف absinthe-win-2.0.exe بالمجلد الذي قمت بفكه قبل قليل
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

وسيتم إنشاء ملف تحت اسم absinthe-win-2.0.
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

افتح المجلد الجديد الذي أنشأ وقم بتشغيل absinthe.exe.
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

الخطوة الثالثة
قم بإيصال الايباد إلى الكمبيوتر من عبر USB وتأكد من إلغاء أي كلمة سر أو إعدادات VPN التي قمت بعملها سابقاً
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

الخطوة الرابعة
إضغط زر Jailbreak للبدء
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

الخطوة الخامسة
سيقوم البرنامج بأخذك عبر عدة خطوات للجيلبريك بالإضافة إلى: بداية الجيلبريك، ارسال ملفات الجيلبريك الأولى، ارسال ملفات الجيلبريك النهائية، الانتظار لإعادة التشغيل، الانتظار لاكمال العملية.
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1] كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1] كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

الخطوة السادسة
سيتم ابلاغكم بإنتهاء الجيلبريك 'Done'.
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

الخطوة السابعة
وخلال لحظات ستلاحظ أن سيديا ظهرت
كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]

كيفية جيلبريك الايباد باستخدام Absinthe 2.0 (Windows) [5.1.1]


*** اذا واجهتك اي مشكلة يرجى إعادة المحاولة أو اجراء الطريقة على الجهاز بعد استرجاع النظام من خلال restored الى iOS 5.1.1 (تذكر أن تأخذ نسخة احتياطية قبل استرجاع النظام)***

Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (44)
You must login or register to add a comment...
Emily
Emily - May 15, 2013 at 3:12pm
This one actually works!!!! thank you!!!!
tohmodi
tohmodi - September 30, 2013 at 12:34pm
when i am trying to jail break , Absinthe application start and then after some time gets the windows pop that Absinthe stopped responding and jail break stops... do we have any solution for this problem
Rambo
Rambo - March 7, 2013 at 5:57pm
Hello! I have a problem with my ipad , jailbreak works but when i install apps to device then it isnt work " the install was unsuccessful " i dont know what happened:( please help me!! what can i do??
Nisha
Nisha - November 11, 2012 at 6:43pm
Does this work fine on new ipad
J-SIN331
J-SIN331 - November 3, 2012 at 7:24am
Hello, i got the Ipad 3 jailbroken with Absinthe. Two Days ago noticed that FaceTime and Message icons disappeared. They are not listed in settings and when I search with spotlight nothing's found. Any suggestions as I cannot do a restore cause apple stoped signing 5.1.1 and don't have blobs saved as I bought it 10 days ago?
jeandre
jeandre - November 3, 2012 at 3:06am
Ipad 3 Modem Firmware 2.0.02 Model MD366SO Version 6.0.1 (10A523) Please help to jail Break Or Downgrade Or Something PLEASE!!!!!
Matt
Matt - August 20, 2012 at 8:03pm
After going through the complete jdibrake procedure as instructed Cydia has appeared on my iPad 2 wifi but when you press Cydia nothing happens? I repeated the process
aditya86
aditya86 - August 9, 2012 at 9:57am
it's succesfully done jailbreaking with ipad 1, but when i try to install ipa, it always said "invalid ipa" using both ifunbox and installous. The cydia always unable to load (couldn't connect to the server). Any solution?
capitanloria
capitanloria - July 31, 2012 at 10:07pm
does anybody has problems with sudden shutdowns after jailbrake? from normal operation, ipad 2 wi-fi, when wi fi is turned on suddenly shutsdown....any help????'
Sid
Sid - June 5, 2012 at 7:35pm
I have an iPad 3 (GSM)...although Cydia appears and works fine using absinthe-win-2.0.4...i am unable to install Installous 5...i keep getting error has mismatch. Has anyone else had this or knows how to resolve this?
konquistador
konquistador - September 26, 2012 at 6:34pm
Hi, i am getting the same error while downloading installous 5, its says Hash Error Mismatch. Did you find a solution yet?
Bullet
Bullet - June 3, 2012 at 8:17pm
Tested with absinthe 2.0.4 on iPad 2,2 running IOS 5.1.1 ended every time with Hmm something went wron, trying to recover. I found the solution here: http://www.ios5jailbreak.org/forum/absinthe-2-0-error-something-seems-to-have-gone-wrong.html If you force the iPad into DFU mode, do a Shift+Restore in itunes, and load IOS 5.1.1 from nothing then it works
Oolyctus
Oolyctus - May 26, 2012 at 5:46pm
First, backup your device with iTunes. Then on the iPad, go to settings, reset, erase all data and settings Try jailbreak again I had an equivalent issue with my 12 out of 13,8 gb iPad wifi (very long first step ! Then error during the second) After resetting, JB in less than a minute, flawless. Then you restore from backup.
Luis
Luis - May 29, 2012 at 4:59am
you´re the man!!! It just work fine!!! thz...!!!
Atom
Atom - June 21, 2012 at 3:39am
I found on my iPad 1 the same error and it worked after I did a "Reset Network Settings".
Leo
Leo - May 26, 2012 at 3:31pm
Worked flawlessly with my iPad 3 (WiFi). - Downloaded the 5.1.1 firmware for iPad 3 WiFi - Restored with iTunes (Shift + Click on Restore) - Executed Absinthe 2.0.1 - Jailbreaked successfully
Kunal
Kunal - May 26, 2012 at 1:56pm
Does not work for my iPad 2 (GSM), when I press jailbreak after launching absintheit stops responding after a while on the pc. Tried it 3-4 times with the same message. Any help?
Kunal
Kunal - May 26, 2012 at 1:58pm
using windows 7.
Oolyctus
Oolyctus - May 26, 2012 at 5:47pm
See my answer up there, sorry for double post.
Oolyctus
Oolyctus - May 26, 2012 at 8:59am
Jailbreak ongoing on iPad 2,1 iOS 5.1.1 First try after backup - error on step 5,2 Second try after cleaning precedent jailbreak files - error on step 5,2 Third try after erasing data and config on iPad - SUCCESS starting Cydia (while starting iTunes then force closing it BIGFAIL) ending with only four apps, youtube, video, todo, ... but not settings ! Restoring iPad Do not be too eager, be patient !
Oolyctus
Oolyctus - May 26, 2012 at 10:15am
Well, after a few other mistakes, not being patient enough, I've got a full functionning iPad 2,1 running iOS 5.1.1 jailbroken. Thx to the whole Jailbreak scene ! Please do not crack apps !
Ferdibanget
Ferdibanget - May 26, 2012 at 3:26am
Jailbreaked my ipad3 gsm, but need the essential repo.. Y
haririan
haririan - May 25, 2012 at 10:23pm
ipad3 4g unlock factory worked 100%
haririan
haririan - May 25, 2012 at 10:22pm
iclarified allways up2date tnx :* :*
Kurshid
Kurshid - May 25, 2012 at 8:56pm
Its working good on my Ipad2.....thanx
Goyko Mitrovich
Goyko Mitrovich - May 25, 2012 at 8:08pm
Won't work on iPad 2,4 (32nm) they say it will soon support it....... we have to keep waitinggggggggggggggg
Dre2409
Dre2409 - May 25, 2012 at 6:51pm
Just restore to 5.1.1! Not update
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS