Como Desbloquear seu iPod Touch 2G (Windows)

POST

MAIL

Posted March 11, 2009 at 2:06pm by iClarified

Essas são instruções para desbloquear seu iPod Touch 2G usando Windows e Voltage.

Passo Um
Crie uma pasta com nome de Pwnage na sua Área de Trabalho e ponha o Voltage nela.
- Clique aqui para pegar o Voltage.

Como Desbloquear seu iPod Touch 2G (Windows)

Passo Dois
Extraia o Voltage dando 2 cliques sobre o arquivo.
*Nota: Talvez você precise do WinRar instalado para fazer isso.

Passo Três
Abra a pasta (já extraída) Voltage e dê dois cliques sobre o executável Voltage - Jailbreaker.exe.

Passo Quatro
Voltage se iniciará e te apresentará 3 requesitos para se fazer o JailBreak.

Clique em Begin Download para iniciar o download do firmware.

Salve o arquivo na pasta Voltage.
*Nota: Em alguns computadores os downloads vão automaticamente para a pasta Downloads do usuário. Recorte o firmware (.ipsw) e cole-o na pasta Voltage (que está dentro da pasta Pwnage).

Passo Cinco
O passo 5 é necessário somente para usuários do Windows Vista. Caso esteja usando o Windows XP, passe para o passo 6.

Na pasta Voltage, abra, clicando 2 vezes, a pasta Install_Files.

Clique, apenas uma vez e com o botão direito, sobre o arquivo lib-win32-filter-bin-0.1.12.1.exe e selecione Propriedades (a última opção da janela que se abre).

Vá em compatibilidade e selecione a opção Executar este programa em modo de compatibilidade: Windows XP (Service Pack 2) . *Tenha certeza de ter selecionado Windows XP (Service Pack 2).
Agora, confirme clicando em Ok.

Passo Seis
De volta ao programa Voltage, clique em Begin Install para instalar o LibUSB..

Siga os comandos para instalar o LibUSB no seu computador. (Só clicar em Next...)

Passo Sete
Novamente no Voltage, clique em Begin Install para instalar o C++.

Siga os comandos para instalar o C++ no seu computador. (Só clicar em Next...)

Com a instalação concluída, volte ao programa Voltage e clique em Next Step (2), localizado no canto inferior direito da janela do programa.

Passo Oito
Clique no botão Select para selecionar o arquivo IPWS que você baixou.

Vá até a pasta Voltage e selecione o arquivo iPod touch 2.2.1 firmware, depois, clique em Abrir.

Passo Nove
Agora, faremos um firmware personalizado (.ipsw). Clique em Make IPSW para continuar.
*Nota: Não se esqueça de marcar a opção Would you like Installer.app?

Uma janela de comando se abrirá e mostrará o progresso. Quando pronto, a janela se fechará.

Clique em Next Step (3) para continuar.

Passo Dez
Na pasta Voltage, abra a pasta JB_Files.

Clique com o botão direito no arquivo Custom_Restore.ipsw e selecione Renomear.

Adicione .zip ao final do nome e confirme a mudança.
*Nota: Todos os arquivos devem ter suas extensões junto ao nome, como o .txt do arquivo commands. Caso o .ipsw não esteja junto ao nome, vá ao Painel de Controle, Opções de pasta, Modo de exibição e desmarque a opção “Ocultar as extensões dos tipos de arquivo conhecidos”.

Clique com o botão direito no arquivo Custom_Restore.ipsw.zip e clique em “Abrir com...”

Selecione o WinRar da lista. *Nota: Você precisa do WinRar instalado no seu computador.

Com a janela no WinRar aberta, abra a pasta Firmware dando dois cliques nela.

Em seguida, abra, com clique duplo, a pasta all_flash.

Depois, abra a pasta all_flash.n72ap.production com clique duplo.

Faça o Download AQUI do arquivo LLB (LLB.n72ap.RELEASE.img3). Arraste o arquivo para dentro da janela do Winrar (basta clicar sobre o arquivo e, segurando-o, arrastar para cima da janela do winrar.)

Uma janela de nome e parâmetros do arquivo aparecerá. Clique em OK para prosseguir.

O WinRar irá atualizar o arquivo. (Isso pode levar de alguns segundos a minutos).

Feche o WinRar quando terminado e vá novamente à pasta JB_Files.

Com o botão direito, clique no arquivo Custom_Restore.ipsw.zip, clique em Renomear e insira o antigo nome (Custom_Restore.ipsw). Confirme a operação como anteriormente.

Passo Onze
Agora, de volta ao Voltage, precisamos colocar o iPod Touch em modo DFU. O método mais prático é conectar seu iPod ao computador e, com ele desligado, apertar simultaneamente por 10 segundos o botão Power e o botão Home. Após os 10 segundos, solte o botão Power e continue pressionando o botão Home por mais 10 segundos.

Para confirmar se o iPod está em DFU, pressione o Check DFU Mode.

Quando estiver em DFU, clique no botão Next Step (4)

Passo Doze
Você pode agora permitir que seu iPod instale firmwares personalizados. Clique em Patch Device.

Passo Treze
Uma vez “livre”, é hora de carregar no iPod seu firmware personalizado usando o iTunes.

O iTunes irá reconhecer o iPod em recovery mode. Clique em OK para fechar a caixa.

Segurando a tecla Shift, clique em Restaurar.

Uma janela se abrirá para escolher o firmware a ser carregado no iPod. Selecione o arquivo Custom_Restore.ipsw da pasta Voltage/JB_Files e clique em Abrir.

Passo Quatorze
Quando o Firmware for carregado com sucesso, você terá um iPod 2G totalmente desbloqueado (JailBroken)!

Agradecimentos
Um grande agradecimento ao CalebMingle por ter criado o Voltage.
E a KCA pela tradução em português.

Follow iClarified

Filipe Camargo - June 16, 2010 at 12:58pm

voltage.rar link is down!

Reply · Like

f1982 - December 24, 2009 at 11:04am

I have a brand new touch that I want to jailbreak. I understand that blackra1n will only work on those which were made before week 40, ie the serial number has 4th and 5th digits of 39 or less. Jailbreaking with blackra1n on models with serials 40 or above (mine is 48) will require the unit to be tethered and blackra1n run every time it is turned on. This is simply not worth the hassle! So firstly, does anyone know if the voltage software will jailbreak without the tethering issue, and secondly, if id does can someone point me in the direction of a working download link? Cheers, F1 larscandrum@gmail.com

f1982 - December 22, 2009 at 3:41pm

The voltage download doesn't work and I can't find any working alternatives. Can someone who has it, and the custom firmware post a working download link, or if not send me them? I'd be extremely grateful.

Bella - February 14, 2010 at 10:22pm

Link for voltage download (copy + paste link) http://www.megaupload.com/?d=HAKJVJ46 Link for firmware downloads (copy + paste link) http://www.felixbruns.de/iPod/firmware/ good luck! I'm having a lot of trouble installing the libUSB. Done everything it told me to do and even tried it the Vista way. (I'm windows 7). Also, when i get to "Make IPSW" I click it, it does the black window thing then closes 3 seconds later. I try to click next step but it says "Custom IPSW not found" any help? D:

apo - October 20, 2009 at 2:45pm

I got stuck at step 13. Error 1601 appeared after restoring it with "custom restore". I 've been doing da same thing in that instruction. What did I missed?

maikey - September 22, 2009 at 3:37pm

hey guys. can anyone help me??? after the restoring. my ipod won't turn on again? please help me. :(

maikey - September 22, 2009 at 3:57pm

problem resolved... thanks anyway. :)

amit - September 16, 2009 at 10:07pm

This guide is getting old now. OS 3.0 is out and that is something you should upgrade to. there are jail breaking tutorials over the internet for that and they are way easier. I have used this method, it works but the new jailbreaks called red snow is way easier. Google it.

hi wrote - September 15, 2009 at 10:32pm

my screen got white after booting do i have to wait or is there something wrong plz help

Ivan * HELP-ME - August 21, 2009 at 9:22pm

Ola, eu realizei os passos até colocar em DFU, só que não consegui e desliguei o computador... no outro dia quando liguei estava lendo pra caramba, travando sabe... apaguei os arquivos que reconheci da instalação, mas o computador continua lendo, Vc sabe me dizer o faço para voltar ao normal???? Help-me, please

sssssss - August 20, 2009 at 9:08am

pls heeelp. ive converted the custom restore into zip and im in winrar. what does it mean when it says to download and drag it onto the winrar thingo

ivan - August 21, 2009 at 9:18pm

derfjam - August 19, 2009 at 3:08am

I completed the tethered jailbreak and my ipod is working fine already. but when i turned it off it does not want to turn on again. is this a normal behavior? do i have to repeat the process again?

mojo - August 8, 2009 at 7:51pm

I tried the instructions on the web page and the device would not re boot at the end of the process. Then the Itouch just died and displayed Unknown USB device. Eventually, I got the thing back to life and restored the original firmware 2.2.1 Can someone 'clarify' if the llb.img patched file that is downloaded should replace and overwrite the existing llb.img file in the firmware/all_flash folder? Coz the downloaded patch llb file has a [1] in the file name......if someone from iclarified can 'clarify, it will be much appreciated :-)

derfjam - August 16, 2009 at 10:28am

i had the same dilema.how did you got it back to work?

mojo25 - August 16, 2009 at 11:01am

Hi, I did manage to restore the original firmware on the ipod and it works as normal. Considering I've only just purchased it I'm reluctant to try jailbreaking the itouch for fear of being unable to restore at all..... I managed to recover from the 'USD Device unrecognised' message through going into device manager on the laptop and removing the USB entry and trying again, somehow I managed to get the laptop to recognise the itouch and load up itunes once I had removed the USB device in 'Device Manager'. Since then, I'm off the idea of jail breaking for now until I'm bored of the itouch.

james - August 17, 2009 at 7:18am

Hey man ye i got the same problem with my itouch 2g with the usb not recodnised after doing the whole pwnage thing. and because i am not a computer tech can u explain to me in simple steps how you got ur itouch to be recodnised again? that would b really awesome. cheers

rahulr0y - July 23, 2009 at 12:56pm

im at the part where you have to select the ipsw but it is taaking forever, there is a a cricle of black cicles just rotating over moving file....

bhikare - July 21, 2009 at 9:00pm

Worked Great!!!!! At first I got the "ERROR1604". All you have to do is get your ipod in DFU Mode, patch it, then restore it in itunes with the restore_firmware.ipsw. Once that is done, let it boot up. Then put it in DFU mode again and patch it again. Then go back into itunes and restore the ipod with the custom_restore.ipsw. Thankyou

Tyrial - August 31, 2009 at 3:00pm

Same thing happened to me. I couldn't figure it out until I read your post. Thanks.

david - July 21, 2009 at 1:09am

my ipods in dfu but voltage doesnt see it itunes does though any help plz

irish - July 19, 2009 at 1:09am

in step 7 i cant seem to find the firmware under voltage "iPod2,1_2.2.1_5H11a_Restore" the icon of a white box with a note sign where will i beble to download that?

Icantdoit:S - June 12, 2009 at 6:14pm

Somehow i cant do it. I cant Restore with the custom. Why cant i?

SaJi482 - June 29, 2009 at 10:15am

I had error 1604. If you have the sam one then you can try to jailbreak again from the start or downgrade iTunes to 8.1.1. (You will lost library and backup of your iPod) (Uninstall iTunes and then install iTunes 8.1.1. (http://www.oldapps.com/itunes.php) I hope it will help.

Fahd - June 8, 2009 at 8:22am

Does anyone know if this method will work but with Firmware 3.0 Beta 5?

pipo - June 25, 2009 at 10:23am

it shouldent

NIck - June 4, 2009 at 6:43pm

Yeah so when I go to rename the Custom_Restore.ipsw (to add the .zip), the file extension doesn't show up, so what ends up happening is Custom_Restore.zip.ipsw... which will not open with winrar. No matter what i do it always slaps .ipsw on the end of it.... Anyone have any ideas? would be greatly appreciated. Thanks

SaJi482 - June 29, 2009 at 10:09am

I had same problem, but then i figuered it out. I am using Windows 7 RC so it's problably diffrent way. 1. Open Windows Explorer ( just a single map, like Pwnage )or documents...) 2. Organize -> Folder and search options -> View 3. Uncheck Hide extensions for known file types

iPod2userhelp - July 9, 2009 at 9:08pm

Thanks so much for the help with renaming, it helped me a lot.

iFahad - May 30, 2009 at 3:02pm

thankyou very much i dont have ipod touch 2g but i understand it all.

mpc - May 28, 2009 at 5:42pm

It works. My Ipod 2G is jailbreak. Only follow the instructions and no any problem. TKS!!

More Comments