Hoe Unlock/Jailbreak je de iPhone 2G op OS 3.0 met RedSn0w (Mac)

POST

MAIL

Posted June 20, 2009 at 5:54am by iClarified

Hieronder staan de instructies voor het unlocken en jailbreaken van de iPhone 2G - versie 3.0 firmware met behulp van RedSn0w voor Mac. Voordat je aan de slag kan, wees er zeker van dat je iTunes 8.2 gebruikt.

Je kunt de Windows versie van deze instructies vinden op deze pagina.

Stap 1
Maak op je Desktop een map aan met de naam Pwnage.

Download onderstaande bestanden en plaats deze in de Pwnage map die je zojuist gemaakt hebt:
- RedSn0w (mirror)
- BL 3.9
- BL 4.6
- 3.0.0 (2G): iPhone1,1_3.0_7A341_Restore.ipsw

Het RedSn0w zip bestand bevat de applicatie RedSn0w, pak deze uit naar de Pwnage map.

Hoe Unlock/Jailbreak je de iPhone 2G op OS 3.0 met RedSn0w (Mac)

Stap 2
Verbindt de iPhone met de computer en start iTunes.

Selecteer de iPhone uit de lijst van apparaten aan de linkerzijde. Houdt nu de Option toets ingedrukt en klik op de Restore knop. De voorkeur gaat uit naar de Restore optie, omdat er dan geen overbodige data van vorige versies achterblijft.

Open de Pwnage map op je desktop en selecteer het firmware ipsw bestand. Klik op de Open knop om verder te gaan.

Stap 3
Zodra iTunes klaar is met het bijwerken van de firmware op de iPhone, start dan RedSn0w uit de Pwnage map op de desktop.

Stap 4
Zodra het RedSn0w venster verschijnt klik op de Browse knop.

Stap 5
Selecteer het firmware ipsw bestand uit de Pwnage folder op de desktop en klik op de Open knop.

Stap 6
Als de firmware geverifieerd is, klik dan op de Next knop om door te gaan.

Stap 7
Selecteer de Cydia optie (indien gewenst) en de Unlock optie en klik op de Next knop.

Stap 8
Nu moet de lokatie van de Bootloader bestanden aangegeven worden.

Klik op de Browse knop en selecteer het bootloader versie 3.9 bestand uit de Pwnage folder op de desktop.

Klik op de Browse knop en selecteer het bootloader versie 4.6 bestand uit de Pwnage folder op de desktop.

Klik op de Next knop om door te gaan.

Stap 9
Zorg dat de iPhone helemaal uit staat en sluit hem aan op de computer. Klik daarna op de Next knop.

Stap 10
RedSn0w zal nu de stappen beschrijven om in de DFU modus te komen. Voor meer informatie over de DFU modus, ga naar deze pagina.

Houdt de Home knop en de Power knop op de iPhone ingedrukt voor 10 seconden.

Laat alleen de Power knop los en houdt de Home knop nog steeds vast tot RedSn0w de iPhone gedetecteerd heeft.

Stap 11
De iPhone zal nu herstarten.

Stap 12
RedSn0w zal nu beginnen met het uploaden van de nieuwe RAM Disk.

Stap 13
Zodra dit voltooid is krijg je de melding dat RedSn0w klaar is. Klik op de Finish knop.

Als de iPhone klaar is met het herstarten (na 5 minuten ongeveer) zal BootNeuter automatisch de iPhone unlocken en jailbreaken. Indien geselecteerd zal Cydia beschikbaar zijn vanaf het Springboard.

Follow iClarified

XPIKY28 - December 7, 2009 at 1:12pm

I have a iPhone 2G with a non working power/sleep/hold button, the one on the top and I want to jailbreak/unlock it with Pwange Tool 3.1.4, but how can I put it into DFU mode with out using that button? Pwange Tool 3.1.4 requires to put in DFU mode, I am open to use another program like Redsnow too have both Mac and PC... .

Reply · Like

Luis - November 20, 2009 at 8:04am

Thank you very much guys!! It worked perfectly!! Many Thanks! :D

Cl - November 13, 2009 at 9:08pm

i was waiting for my ipod to reboot... like in the last few instructions. In the part t said jail breaking device- and waiting for reboot. it takes a long time... i guess it's over 5 minutes and around...what do i do now? i cannot even turn it on by pressing the button... i tried it O.o please reply to help me :) any replay that helps would end up with a thank you from me XD

cl - November 13, 2009 at 10:44pm

i waited for a long time! and it still hasnt rebooted and wouldnt turn on! please help!

AAGJMB - January 10, 2010 at 1:40am

I too am stuck at the "Waiting for reboot" part.

Christian - September 21, 2009 at 3:23pm

does it work with itunes 9????

yasin - September 18, 2009 at 1:13pm

IT WONT FINGD MY IHPONE AFTER I PUT IT INTO DFU MODE

dtown218 - September 12, 2009 at 1:13am

i follow this guide exactly and everything works but when i put in a sim card it says no service? can anyone help me ive been trying to do this for a week now..

frikec - September 7, 2009 at 3:37pm

The URL for BL-36.bin doesn't work ... have anyone mirror for this? Thanks!

john - September 3, 2009 at 10:41am

my friend gave me his 2g iphone which he accidently updated to 3.0.1 (not sure if 3.0 or 3.0.1 but its one of those 2) and well my question is when i connect the iphone to the computer itunes wont even let me get to step 2 (restoring part). its ask me to register the phone and so on. So how do i even get to step 2?? any help is much appreciated. thanks

Klette - September 2, 2009 at 2:21pm

i have updated my 2g from 1.1.4. to 3.0.1 everything worked all right till i checked the app for cydia. after this the phone went black and the apple appeared. after the battery went flat nothing is working any more. can anybody help ?

gusgus - August 22, 2009 at 11:38am

Trying to update 2g to 3.0.1 but at step 6 I get "Unable to recognize specified IPSW". I am able to successfully update to 3.0 though. All were downloaded using Firefox on mac. What's up with 3.0.1? In any event, thanks iclarified for these tutes!

Louis - August 26, 2009 at 6:46am

The instructions state to follow the rest of the guide as indicated; which roughly means you restore in iTunes using 3.0.1 (iPhone1,1_3.0.1_7A400_Restore.ipsw) but then when RedSn0w asks for the IPSW to verify, browse to the 3.0.0 IPSW file (iPhone1,1_3.0_7A341_Restore.ipsw). Hope this helps!

tomadarsh - August 31, 2009 at 3:28pm

BL 3.9 - link is not working, can u recheck that. Is it possible to jailbreak/unlock iphone 3gs 3.0.1 .

On-Wax - August 21, 2009 at 2:26am

I have the IPhone 3GS with 3.0.1 firmware, when i tried to restore the phone using "iPhone1,1_3.0.1_7A400_Restore.ipsw" it gave me an error message that said "the IPhone... could not be restored because the firmware file is not compatible" Any ideas??? Please???

dtown218 - September 12, 2009 at 1:16am

read the tut! this is for a iPhone 2g not and iPhone 3g like you say u have. duh..

ReliableSource101 - August 20, 2009 at 12:40am

Thanks For the Info it worked great for my iphone 2g I'll be sure to return to this site for any other information needs. Keep up the good work!

MrBlue - August 11, 2009 at 7:02pm

Hello, my 2G was succesfully upgraded to 3.0.1. the only problem is phone call sound became vibrate only. No ringtone. How can I solve it? thanx

pmb - August 9, 2009 at 9:26am

These tutorials I find seem to only work for the *iPhones* and not the iPod Touch as claimed to do? Would like to hear from an iPod Touch 2G owner that got theirs to work. No matter which firmware version I tried after all the suggestions across the 'net, it never worked with my iPod Touch 2G (v.3.0). Hangs on the "reboot" message every time. Bah. Not worth the hassle...

bence - September 8, 2009 at 5:52am

I had the same problem, but it works with the 0.7 redsnow

paul - August 9, 2009 at 1:02am

getting everything but no internet...error says i am not connected to a cellular data service.....but I am. i use sim with my samsung eternity for internet on att....HELP.....IVE RAN THIS PROGRAM 5 TIMES.

Mike - August 6, 2009 at 5:55am

Not happy here. After running all my Apple app icons disappeared including the ones in the dock. Stick to PWNAGE.

Raya - August 5, 2009 at 5:06pm

My iphone is now on DFU mode and its "waiting to reboot". How long should this normaly take? Mine is stuck here for like 5 minutes.What do i do?

faxao - August 5, 2009 at 5:15pm

in case your iPhone does not reboot in some 20 secs you have to unplug from the USB cable and immediately plug it in again: this trick did work for me.

RayaI - August 5, 2009 at 5:25pm

Its not working, Its still stuck. :S I removed it from the usb for 1 second, and plugged it back again.

faxao - August 5, 2009 at 5:30pm

do not worry.....go back again and redo the whole procedure from the beginning (iPhone in DFU, update the firmware to the 3.0 and go through the redsn0w 0.8 again)...the second time did work for me

rossb - August 17, 2009 at 6:10pm

As faxao said - unplugging from the USB then immediately plugging it back in worked for me as well. Whew! I was worried there for a second!!! Thanks faxao!

airwalker - August 29, 2009 at 5:59pm

Same thing here. After redsn0w got stucked with "Rebooting" iPhone 2G, a quick disconnect and reconnect of the USB cable did the job :-) Ufff...

jc - September 15, 2009 at 10:44am

unplug your usb cable from the mac and then plug back in. that should reinitiate the boot process.

Jason - January 10, 2010 at 1:43am

I got stuck too at "Waiting for reboot." Taking it out of the dock and then right back in got it moving fine.

Raya - August 4, 2009 at 7:04pm

When i choose the firmware, It says "Unable to recognize specified ipsw" HELP!

faxao - August 5, 2009 at 2:28am

download again the appropriate firmware and check that the file has got the .ipsw format (use explorer or firefox browser not safari).....it should work

faxao - July 28, 2009 at 3:58am

It worked like a charm on my iPhone 2G fw 1.1.4 upgraded to 3.0. The only problem I had was related to the reboot of the phone during the redsn0w procedure. I had to detach and reattach immediately the phone from the USB cable (connected to my Mac) and this did the trick ! Thanks

iFlicks - August 30, 2009 at 8:16pm

Unplugging and plugging back in at reboot worked!

squidge - July 25, 2009 at 8:28pm

ok, I did the unlock through redsnow and I can make calls but why can't I access the web? It says I don't have a cellular data service. I have the following in my network settings: idata.o2.co.uk username: vertigo the password is hidden but I'm sure this is what it had before so how come it's not working? I'm with O2 (carphone warehouse) but I just have a sim through them and I got the iphone from my brother who unlocked it for me. any suggestions as to how I can get my internet access back - I pay monthly (contract) and have internet as free with the deal I manage to get.

squidge - July 25, 2009 at 8:51pm

ok - got it. if you don't have an iphone internet tariff then you have to change the idata.02.co.uk to mobile.o2.co.uk works now. phew... only took several hours to update to v3.0, lol :-)

More Comments