Cum sa iti modezi iPhone-ul 3GS folosind PurpleRa1n (Windows).

POST

MAIL

Posted July 3, 2009 at 1:14pm by iClarified

Aici ai instructiuni despre cum sa iti modezi iPhone-ul 3GS folosind PurpleRa1n pentru Windows. Dupa ce ai terminat, iti poti debloca iPhone-ul 3GS urmand acest tutorial.

Aceasta este o prima versiune a modului si ca atare, anumite aplicatii, ca Winterboard, nu vor merge. Daca este important pentru tine, poate ar trebui sa iei in considerare sa astepti pentru versiunea finala a soft-ului creata de iPhone Dev-Team.

Acest tutorial ar trebui sa mearga cu Windows XP, Vista si 7.

Pasul unu
Deschide browserul favorit si intra pe http://www.purplera1n.com. Apasa pe logo-ul Windows din partea de jos a paginii.

Cum sa iti modezi iPhone-ul 3GS folosind PurpleRa1n (Windows).

Pasul doi
Cand apare fereastra de dialog, alege sa il salvezi pe desktop.

Pasul trei
Deschide fisierul purplera1n.exe de pe desktop cu dublu click, pentru a lansa aplicatia.

Pasul patru
Apasa pe butonul make it ra1n.

Pasul cinci
Acum, iPhone-ul tau va porni in recovery mode. Vei vedea o poza a lui GeoHot care va inlocui ecranul obisnuit de recovery al dispozitivul tau.

purplera1n va rula iar apoi telefonul se va restarta.

Pasul sase
Dupa ce telefonul s-a restartat vei observa o icoana noua pe SpringBoard denumita Freeze. Apas-o pentru a continua.

Pasul sapte
Dupa ce Freeze se va deschide, apasa pe Install Cydia.

Pasul opt
Dupa ce Cydia s-a instalat, trebuie sa restartezi iPhone-ul.

Pasul noua
Vei putea rula Cydia dupa ce telefonul s-a restartat. Lasa-l sa isi faca toate update-urile necesare apoi foloseste tutorialul nostru de Deblocare pentru a putea, intr-un final, sa deblochezi iPhone-ul 3GS.

NOTA*: Pentru a indeparta icoana Freeze de pe desktop, poti instala CyDelete prin Cydia si apoi folosi pentru a sterge aplicatia. Vom publica un tutorial despre asta in viitorul apropiat.

MULTUMIRI*: Ii multumim lui GeoHot pentru munca lui, fara de care modarea nu ar fi fost posibila. Deasemenea, multumim si celorlalti contribuitori, ca chronic si dev-team, si lui Mateen pentru capturi de ecran!

Follow iClarified

Tbomb - February 25, 2010 at 10:16am

This blackrain purple rain software did not work on my i phone.... the phone tried starting up but then turned off .... and never turned on again....

Reply · Like

Daniel - October 18, 2009 at 5:49pm

Great tutorial. However, I'm encountering the following problem. I have a factory unlocked 3gs 16gb with 3.0.1. After running purplerain and receiving the success message (Windows PC), I saw that I did not have any new icnon on my iphone. The purplerain log file shows the following: *** INFO: welcome to blackra1n for windows INFO: loaded dll at C:\Program Files\Common Files\Apple\Mobile Device Support\bin\iTunesMobileDevice.dll INFO: button clicked INFO: internal device callback called INFO: callbacks registered INFO: sent enter recovery command INFO: internal recovery callback called INFO: unregistered normal mode callback INFO: go go gadget ra1n INFO: send command started INFO: file opened ioctl: 1 INFO: command setenv auto-boot true sent INFO: send command started INFO: file opened ioctl: 0 INFO: command saveenv sent send payload: 0 INFO: start sending exploit ioctl: 0 INFO: exploit closed 0 sent exploit INFO: send command started INFO: file opened ioctl: 0 INFO: command geohot sent send picture: 0 INFO: send command started INFO: file opened ioctl: 0 INFO: command setpicture 0 sent INFO: send command started INFO: file opened ioctl: 0 INFO: command bgcolor 1 1 1 sent send ramdisk: 0 INFO: send command started INFO: file opened ioctl: 0 INFO: command geohot sent INFO: I JUST DROPPED IT LIKE ITS HOT INFO: unused callback called WARN: wtf who called this? INFO: global callback finished What am I doing wrong? Thank you.

markymark888 - September 25, 2009 at 4:28am

Does anybody know if purplera1n will work on 3.1, I've got a 3gs

me - September 25, 2009 at 1:27pm

No it will NOT work with the 3.1 update!!!

markymark888 - September 25, 2009 at 2:57pm

Thankyou, I don't want to be a pain but do u know roughly when the jailbreak comes out for 3.1, and I apologize again for being a pain thanks

Rome - September 9, 2009 at 6:19pm

Everyone, just wait for the new 3.1 jailbreak. No use of doing this if another software jailbreak coming for the 3.1.

markymark888 - September 24, 2009 at 7:49pm

Could u tell me pls if purplera1n will work on this new 3.1 firmware answers much apprieciated thanks

Mr. No WIFI - September 9, 2009 at 6:08pm

Sorry, I know this is probably somewhere in the threads but... jailbroke my 3GS... using purple snow. (didnt want to start from scratch with red snow).. now WiFi doesnt work... any ideas?

Rome - September 9, 2009 at 6:14pm

You should just wait for the new jailbreak for 3.1 and restore your phone but if you really want to do a jailbreak for 3.0.1 then Redsnow is the only software that works and not Purplerain.

phukt88 - September 8, 2009 at 7:40pm

junk it just freezes pretty gay since the makers cant even reply to the comments

leftyguns - August 27, 2009 at 2:50pm

purplera1n does not work on versio 3.0.1 but redsnow will. you need an XP machine i could not get it to work on vista. dl the files on an xp machine and jailbreak from that and it works

ichyowie - August 27, 2009 at 1:39pm

This purplera1n is GARBAGE! I have tried using it and it freezes when it is rebooting. I have not had any problem using redsn0w, however, I was trying purplera1n because my phone kept crashing when I downloaded Winterboard/Mobliesubstrate using redsn0w. I figured using purplera1n would allow me to install Winterboard, bit, it keeps freezing up. I have restored more then 4 times and purplera1n DOES NOT WORK. If anyone can help, great, if not, GEOHOT, your program SUCKS. I gave you the benefit of the doubt, but, back to the Dev-Team I go.

Loveholic777@gmail.com - August 17, 2009 at 9:33pm

After all this, it will not reboot...it stays with that guy picture forever....what do I do? I did install the newest version of firmware..stupid....Please Help....

Shawn Murphy - August 22, 2009 at 4:22am

Put your phone in DFU Mode, Then restore your iPhone. The video below says how to do this. http://www.youtube.com/watch?v=ofpinyGlQ8I

leftyguns21 - August 13, 2009 at 10:17pm

i stupidly installed the new update for the iphone 3gs and it wiped my jailbreak clean. now when i try via PurpleRa1n it gets to the point where its waiting on a reboot but it does nothing? anyone know how to get it back up again?

Loveholic777 - August 17, 2009 at 9:31pm

dammmm...I did the samething....is there any other solution?

alexisrobbie - August 12, 2009 at 11:45am

my iphone hang after installing the purplerain

Jay - August 5, 2009 at 2:46pm

This worked like a charm on my Rogers iPhone3GS. Thanks a lot!

Chuck - July 22, 2009 at 4:15pm

You can delete Freeze by installing CyDelete (in Cydia) After a reboot/respring you should go to Settings -> CyDelete -> Enable Non-Cydia Deletion Then you tap(+hold) on Freeze; Click on the X and it will remove CyDelete. :)

GetRidOfFreeze - July 12, 2009 at 11:14am

HOW DO I GET RID OF FREEZE???? CYDELETE DOES NOT REMOVE IT.

Dryskal - July 7, 2009 at 9:37am

i jailbroke the phone a few days ago at my uncles house, worked great, love it. now im home and i captured the iBEC and iBSS, obviously putting the phone in recovery mode, now that its restored it needs to be jailbroken again, well i tried multiple times and each time it works successfully but it doesnt put freeze on the SB, it just goes back to normal. any idea?

Hmf1708 - July 6, 2009 at 4:26pm

Hi i'm a newbie here. Tried purplera1an several time no luck. I dont have any activated AT&T sim or others coz i live outside US or UK, got my 3gs from ebay. What happened is; - restore w itunes, only get 'slide for emergency' no SB or icons at all, then - run purplera1n on Xp, process smoothly until reboot n itunes appear. Still no SB or icons at all, just 'slide for emergency' and usb cable - itunes image. Could anyone please help? Im really desperate to unlock my new phone. Many thanks

ayesha - July 7, 2009 at 7:53am

same prob?? can anyone help plsss...

not telling - July 9, 2009 at 3:36am

Hey I would use redsnow if I were you because you phone hasnt even been activated yet. Nist if the tools only work for activated phones.

Dryskal - July 9, 2009 at 7:29am

i agree with what he said, i used purplera1n at first but went with redsn0w last night and it was much better. winterboard is useable as well as all the other cydia and icy sources. its a great jailbreak, the customization is awesome.

Fizzzo - July 6, 2009 at 12:29pm

Does the app store and itunes work after jailbreaking? and if i want to get free apps from the app store, do i have to download them from my iphone or from my computer? please help, never jailbraked an iphone before

J - July 6, 2009 at 8:15pm

Yes you can download either way! And if you know how you can even get free apps!

aaron - July 5, 2009 at 11:00pm

there was no problem installing this. but my appstore and itunes on iphone wont work any suggestions? also, skype wont work on modified versions..

Fizzzo - July 6, 2009 at 12:30pm

whats the name of your provider?

Bryan - July 5, 2009 at 9:01pm

Hey I jailbroke my iPhone 3G S using purplera1n and installed cydia. I can't seem to get Freeze off of my desktop, I tried using Cydelete and it says Freeze was not installed by Cydia so Cydelete cannot delete it. How do I get it off my desktop?

mplopez - July 5, 2009 at 11:09pm

Why dont you just use poof from SBSettings or from Boss Prefs. it wont delete, but at least it wont be on your screen

Rome - July 6, 2009 at 12:43am

Go to your setting apps and find cydelete then enable the option to delete non cydia apps

Edge - July 5, 2009 at 5:44pm

Wow, I hate thread subscriptions. I've tried to get out of them, hoping this with the unsubcribe will do it.

More Comments