March 29, 2024
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Posted November 3, 2009 at 11:54pm by iClarified
EnglishArabicChinese (Simplified)Chinese (Traditional)CroatianDanishDutchFrenchGermanGreekHebrewIndonesianKoreanPolishPortuguese (Brazil)RussianSpanishSwedishTurkishVietnamese
Đây là những hướng dẫn về cách jailbreak và mở khóa iPhone 3G và 3GS bằng cách sử dụng blackra1n và blacksn0w cho Windows.

Các hướng dẫn này sẽ làm việc với firmware 3.1.2 mới nhất, các baseband 05.11.07, và iPhone có yêu cầu hactivation. Nếu bạn đã jailbroken
these
hướng dẫn để mở khóa sẽ được dễ dàng hơn.

Đối với những người có iPhone 3GS mới (cập nhật BootROM), blackra1n chỉ hỗ trợ một tethered jailbreak. Điều này có nghĩa rằng một khi jailbroken bạn không nên để pin của bạn chết. Nếu nó chết bạn sẽ cần phải kết nối lại nó vào máy tính và sử dụng blackra1n để khởi động nó.


Trước khi tiếp tục đảm bảo rằng bạn đang có trên baseband 05.11.07 bằng cách làm theo
this hướng dẫn. Nếu bạn đang trên 5.12.01 hoặc cao hơn, tiếc là bạn KHÔNG THỂ jailbreak được. Nếu baseband của bạn thấp hơn 05.11.07 thì bạn phải khôi phục lại để firmware 3.1.2 cho iPhone
3G or 3GS.
Bạn có thể làm điều này bằng cách mở iTunes, chọn iPhone của bạn từ danh sách các thiết bị bên trái, sau đó giữ phím Shift và nhấp vào Khôi phục.

Bạn có thể tìm thấy phiên bản Mac của hướng dẫn nàyhere. Ok cho phép bắt đầu ...




Bước Một
Mở trình duyệt web của bạn lựa chọn và điều hướng đến http://www.blackra1n.com. Nhấp vào Windows ở phía dưới logo của màn hình.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bước Hai
Khi được nhắc lưu để tải về máy tính của bạn
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bước Ba
Sau đó, nhấn đúp chuột vào blackra1n thực thi tập tin từ máy tính để bàn để khởi động chương trình
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bước Bốn
Hãy chắc chắn rằng iPhone hoặc iPod của bạn được kết nối với máy tính sau đó nhấp vào nút lớn make it ra1n
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bước Năm
Bạn iPhone bây giờ sẽ được đặt trong chế độ phục hồi.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bạn sẽ thấy một hình ảnh của GeoHot thay thế màn hình phục hồi chế độ thường xuyên trên thiết bị của bạn.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

blackra1n sẽ chạy và sau đó điện thoại của bạn sẽ khởi động lại.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Một tin nhắn popup sẽ xuất hiện thông báo cho bạn rằng blackra1n là phần mềm miễn phí và nếu bạn đánh giá cao nó, bạn có thể tặng cho GeoHot tại geohot@gmail.com.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bước Sáu
Một khi khởi động lại thiết bị của bạn nó sẽ được jailbroken, và bạn sẽ thấy một biểu tượng blackra1n trên Springboard của. Hãy chắc chắn rằng bạn có kết nối internet và báo chí để khởi động ứng dụng.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Chọn các ứng dụng cài đặt của sự lựa chọn của bạn sau đó nhấn để chọn sn0w nếu bạn muốn mở khóa điện thoại của bạn. Nhấn nút Install ở phía trên bên phải màn hình để bắt đầu.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Blackra1n sẽ bắt đầu tải về và cài đặt gói bạn đã chọn.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Nếu bạn đã chọn để mở khóa điện thoại bằng cách sử dụng blacksn0w bạn sẽ được trình bày với một bản ghi Post Cài đặt cho sn0w. CommCenter sẽ được khởi động lại và không có cần khởi động lại. Nếu vận chuyển của bạn không hỗ trợ 3G sau đó vô hiệu hóa nó. Nhấn nút Close để tiếp tục.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bước Bảy
Sau khi hoàn thành blackra1n sẽ respring iPhone của bạn và bạn sẽ tìm thấy các gói cài đặt của sự lựa chọn của bạn trên Springboard.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

Bước Tám
Một khi bạn đã xác nhận của gói cài đặt của bạn là làm việc một cách chính xác bạn có thể sử dụng Gỡ bỏ blackra1n [/ i] nút bên trong các ứng dụng blackra1n để loại bỏ nó từ bàn đạp của bạn.
Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win Làm thế nào để Jailbreak và Unlock iPhone 3G của bạn, 3GS Sử dụng blacksn0w [Win

***THANKS: Cảm ơn rất nhiều đến Geohot để có thể jailbreak. Cũng nhờ những người góp phần làm cho nó thành công. Bạn có thể tặng cho Geohot bằng cách sử dụng nút bên dưới. Xin lưu ý các khoản đóng góp vào Geohot và không vào iClarified.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (627)
You must login or register to add a comment...
Jaydee
Jaydee - May 7, 2013 at 7:28am
I was sturck by the honesty of your posting
Jeanette
Jeanette - May 5, 2013 at 8:46am
Thanks guys, I just about lost it looknig for this.
jamal
jamal - April 24, 2013 at 1:48pm
if enterung recovery doesnot show black image instead of ITUNE recovery logo what should be done?
john paredes
john paredes - September 15, 2012 at 9:56pm
muchas gracias
software akuntansi laporan keuangan terbaik
software akuntansi laporan keuangan terbaik - January 24, 2012 at 8:11am
let me share something you here i use a refurbished compaq for nearly everything these days its been incredibly reliable for well over 2 and a half years i rarely take it anywhere i have an external keyboard plugged into it and i use an external monitor too but i use the lcd at the same time
house for sale cebu
house for sale cebu - February 24, 2011 at 11:50pm
Well this is great article with informative ideas...
nancynewton29
nancynewton29 - November 16, 2010 at 8:54am
Thanks for the post
KUSHAL
KUSHAL - June 13, 2010 at 1:50pm
my details itunes 9.1.1.12 iphone: 3.1.2 ( earlier used blackra1n to jailbreak) modem:5.11.07 thing were going good, i just erased i phone, i tried jail breaking by blackra1n and pawnage/. but after re boot the same apple logo comes, what do i do ...?
mahansf
mahansf - June 13, 2010 at 2:01am
i have an iphone with these version can i use this or not???? version : 3.1.3(7E18) modem firmware : 05.12.01 thanks alot
viet
viet - June 16, 2010 at 11:43am
same here..i got exactly same version as yours....but i couldnt unlock mine....i tried everything...ultrasnow, blacksnow...but still :(......wat about yours??
Kushal
Kushal - June 12, 2010 at 3:20pm
I got iphone 3GS, i jailed broked my cell phone some six months ago. I had problem with cydia, so i erased all setting on IPHONE. now i m using Blackra1n... i tried 6 times, my iphone starts to earlier picture of apple... and get stuck.... time and again..... Any one any idea
Ana Felipa
Ana Felipa - May 27, 2010 at 10:03pm
No comments! You are just perfect, thank you! :-)
Jerry
Jerry - May 19, 2010 at 10:47am
Problem signature: Problem Event Name: APPCRASH Application Name: blackra1n.exe Application Version: 0.0.0.0 Application Timestamp: 4af01257 Fault Module Name: StackHash_0a9e Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Code: c0000005 Exception Offset: 00000000 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Pls i got the above error message why trying to jailbreak my iphone can anyone be of help please
dajoz
dajoz - May 20, 2010 at 12:52pm
looks like blackrain stopo working!!!!!!!!
Bobby
Bobby - May 18, 2010 at 3:22pm
The easiest software to unlock your iPhone is http://softunlock.com It works and it is free. *thumbs up*
jayhay
jayhay - May 17, 2010 at 10:28am
i have tried for 2 days now to unlock my iphone 3gs 3.13 firmware and i have used blackra1n and like 5 more and none of them are finishing the program what am i doing wrong??? it gets stuck in running on the blackra1n.....
asaadsaleh
asaadsaleh - May 17, 2010 at 10:38am
Man, this tutorial is for unlocking the 3.1.2 and not the 3.1.3, you can't unlock the 3.1.3 till now you can jailbreak it. just search this site for unlocking the 3.1.3. regards.
sam
sam - May 10, 2010 at 6:51am
I have successfully jailbroken my iphone 3g with blackr1n but the battery is eaten up very fast - what to do ?
Filipe
Filipe - May 8, 2010 at 8:29am
Hi there. I have my Iphone on 3GS in FW3.1.2 and baseband 05.11.07. I jailbreak it, but my internet (wi-fi) doen´t work. Is it possible to unlock it? Thanks
umer
umer - May 4, 2010 at 12:37pm
I have a tethered iphone 3gs. i used blackra1n every time i restarts 3.1.2, today i used sprint after that my phone goes on itunes logo. now i am not able to do any thing i am not able to restore my iphone to 3.1.2 and blackra1n is also not working plz temme what to do now restore error 1600
Tara
Tara - May 8, 2010 at 8:06am
The only way to restore to FW 3.1.2 is if you have its SHSH stored on cydia. If not then you have no choice but to restore to FW3.1.3 resulting your phone can only be used on AT&T. Then you can jailbreak using. Currently no software is available to unlock 3.1.3. Sorry you have the problem. Never rejailbreak a phone that was previously jailbroken with a different jailbreaking program. I guess then conflicted and your phone got frozen. Now it must be restored to 3.1.2 or 3.1.3. Restoring to 3.1.2 is only possible is your ShSH is on Cydia.
Cleg-VR6
Cleg-VR6 - May 1, 2010 at 9:21pm
After searching for hours on the net and coming close to getting my credit card out to pay £30.00 for sodtware which is complicated to use and not gaurenteed to work i found THIS SITE. AND IT HAS ABSOLUTLY MADE MY DAY. MY IPHONE 3G WAS UNLOCKED TO ALL NETWORKS IN LESS THAN A MINUTE . Thanks you for the usefull program link and more importantly this guide. You deserve a medal. I will be donating a very much desrved ermmm donation. Thanks Again
Aaroni0S
Aaroni0S - April 21, 2010 at 10:12am
Trying to unlock origonal 1st gen I-phone 4gig with blackrain is this not possible at all, also blackrain gave me a "missing asl.dll " error so i googled that and downloaded a patch that claimed to be all dll files for black rain now i get a new error " zlib1.dll cannot be found" any ideas?
Pete
Pete - April 18, 2010 at 9:13pm
I'm having problems with unlocking my iphone. I've used blackra1n many timez w/o any problems but for this particular phone it just wont work. I have a 3g running 3.1.2 on 05.11.07. No matter how many times ive tried as soon as I place the t-mobile sim card it goes to the itunes screen. I just dont get it! thanx in advance
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS