March 28, 2024
Ako jailbreaknúť a odblokovať VᚠiPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Ako jailbreaknúť a odblokovať VᚠiPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Posted January 31, 2010 at 6:57pm by iClarified
EnglishSlovak
Nasledujúce inštrukcie sú určené na jailbreak a unlock Vášho iPhone 2G na firmware 3.1.2 pomocou RedSn0w pre Mac.

Pokiaľ máte Windows použite tento návod.

Pre iPhone 3GS použite tento návod. Pre iPhone 3G zasa tento.


Prvý krok
Vytvorte zložku pomenovańú Pwnage na ploche.

Stiahnite nasledujúce súbory a umiestnite ich do vytvorenej zložky Pwnage:
- RedSn0w
- BL 3.9
- BL 4.6
- 3.1.2 (2G): iPhone1,1_3.1.2_7D11_Restore.ipsw

Dvojklikom rozbaľte redsn0w do zložky v Pwnage.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Druhý krok
Pripojte svoj iPhone k počítaču a spustite iTunes.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Vyberte svoj iPhone zo zoznamu zariadení v ľavom stĺpci. Teraz pridržte stlačený kláves Option a kliknite na tlačítko Restore. Restore je preferované pretože nevytvorí nevyužiteľný priestor v pamäti iPhone.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Vojdite do zložky Pwnage na ploche a vyberte súbor ipsw s firmware. Kliknite na tlačítko Open.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Tretí krok
Keď iTunes ukončí update Vášho iPhone na vybraný firmware, otvorte zložku Pwnage na ploche a spustite aplikáciu redsn0w zo zložky redsn0w, ktorý ste predtým extraktovali.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Štvrtý krok
Keď sa otvorí RedSn0w, kliknite na Browse.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Piaty krok
Vyberte ipsw súbor s firmware, ktorý máte umiestnený v zložke Pwnage na ploche a kliknite Open
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Šiesty bod
Ked bude overený firmware kliknite na tlačítko Next.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Siedmy krok
Z tohto okna vyberte voľby pre jailbreak, ktoré potrebujete. Pokiaľ máte iPhone už pawnutý zaškrtnite voľbu Already pwned.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Pri bootovaní obrazovka zobrazí rozsiahle informácie a sú užitočné len pre vývojárov.

Uistite sa, že máte zaškrtnutú voľbu Cydia a Unlock. V tomto návode si ukážeme aj použitie Custom boot logo a Custom recovery logo.

Keď kliknete na voľbu custom logo, dialógom prejdete výber vašich vlastných obrázkov štartovacej obrazovky. Nájdite obrázok a potom kliknite na Open.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

*Zapamätajte si pravidlá pre boot obrázky: RGB alebo Grayscale formát s Alpha kanálom a rozmermi najviac 320x480. Pokiaľ chcete, použite naše iclarified obrázky:
Boot Logo, Recovery Logo

Kliknite na tlačítko Next
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Osmy krok
Budete potrebovať umiestnenie súborov s bootloadermi.

Kliknite na Browse a vyberte súbor 3.9 s bootloaderom zo zložky Pwnage.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Kliknite na Browse a vyberte súbor 4.6 s bootloaderom zo zložky Pwnage.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Kliknite na tlačítko Next.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Deviaty krok
Pripojte Váš iPhone ku počítaču a uistite sa, že je vypnutý a kliknite na Next
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Desiaty krok
RedSn0w Vás prevedie krokmi k nastaveniu DFU módu Vášho iPhone. Môžete si prečítať viac o DFU móde.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Pridržte naraz obidve tlačítka telefónu
Home a Power na desať sekúnd.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Uvoľnite tlačítko Power ale stále držte tlačítko Home pokiaľ RedSn0w nedetekuje zariadenie.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Jedenásty krok
Váš telefón sa teraz reštartuje
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Dvanásty krok
RedSn0w začne uploadovať nový RAM disk a Kernel.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)

Trinásty krok
O ukončení RedSn0w bude informovať. Kliknite na tlačítko Finish button.

Keď sa skončí reboot iPhone (niečo viac ako 5 minút), naštartuje sa v ňom BootNeuter a telefón sa odblokuje. Nakoniec uvidíte Springboard vrátane aplikácie Cydia.
Ako jailbreaknúť a odblokovať Váš iPhone 2G na OS 3.1.2 pomocou RedSn0w (Mac)


*Veľká vďaka iPhone Dev-Teamu za ich ťažkú prácu a ich príspevok celej iPhone komunite.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (19)
You must login or register to add a comment...
iTwe4kz
iTwe4kz - November 27, 2014 at 2:12am
For those users that are planning to Jailbreak on OS 3.1.3, then I recommend adding this Cydia Source into Cydia after you jailbreak so you don't have to manually input all the Cydia Sources manually. This will automatically add all the best Cydia Sources and give you access to all the best Cydia Tweaks, Themes and Apps for FREE with just a push of a button. Follow the steps below. 1. Open Cydia 2. Tap Sources 3. Tap Edit 4. Tap Add 5. Type this url in the box (cydiasource,n e t) without the spaces and switch coma for a dot in the url. 6. Tap "Add Source" 7. Install the package labelled "All Sources". This will give you all the best Cydia Sources to have access to all the best Tweaks, Apps and Themes for FREE.
DK
DK - January 2, 2014 at 8:16am
I need help.. I wanted to unlock my Iphone 2G which has 3.1.3 version. With recent itunes 11, I cannt do it. however also the itunes 8 /9 /10 it blocking and asking me to download latest version to follow backup n restore option. Do we have any other way out.. Please help
MJ
MJ - September 8, 2011 at 8:48pm
I was able to complete all the steps and could see some updates on the iphone. I have left it conenct and now the screen is blank. Do i need to switch on the iPhone or wait till it re-Boots itself. Thx MJ
Alex
Alex - November 20, 2010 at 7:23am
The tutorial and the links iClarified giving here are NOT MACTHING! I am now stuck with a locked iPhone. Upgraded to 3.1.3 from the given link but stuck on step 4. Its 'Unrecognized IPSW' with Redsnow 0.9.4. D*mn iClarified!
sergio
sergio - March 22, 2011 at 11:33pm
Hey Alex, I ran into the same issue on step 4. So what I did is download the iPhone1,1_3.1.2_7D11_Restore.ipsw file and used that instead and it worked. You can get it from the link below. After I used that file I continued following the steps and it worked fine. Hope it works for you too. https://www.iclarified.com/entry/index.php?enid=750
Frankie
Frankie - August 12, 2010 at 6:22pm
You guys are amazing! Thanks..
Leah
Leah - May 5, 2013 at 3:20pm
Salut j'ai un gros proble8me au niveau du Jailbreak je tiens a sgnaile9 que ce n'est pas mon premier Jailbreak, si quelqun pouvez m'aider. DOONC, j'ai te9le9charge9 absinthe sous W7 tout marche juste au moment que je branche mon iphone (J'ai enleve9 TOUT les MDP) il l'reconnais mais il m'envoie un MSG d'erreur du genre : the attached device has a backup password set.You need to disable the backup password in itunes before you can continue Start itunes, remove the backup password and this program again EUHOK. Dooonc, je sais pas quoi faire y'a rien n'a faire j'ai tous essayer car j'ai vu que bcp pose9 la question, je suis sur l'Itunes de ma me8re fin c'est son pc ce sont ses music mais j'me suis de9connecte9 de son compte, mon pc est dead, je peut pas faire une restauration sinon j'perd toute mes musique AIDEZ MOI SVPPPPPPPPPPPPPP !!!!!
e2n
e2n - August 10, 2010 at 12:54am
Thanks a lot for the tutorials. I was able to unlock and upgrade my 2G phone. you guys rock!!!
m
m - July 19, 2010 at 3:18pm
I solved this problem. The link given in the download list at the top is: - 3.1.3 (2G): iPhone1,1_3.1.3_7E18_Restore.ipsw When you download this, it is "iPhone1,1_3.1.3_7E18" But, when you come to step 4, the current IPSW is not that version. Instead, it is: iphone1, 1_3.1.2_7D11_Restore.ipsw Google that, or download from here: http://mytopfiles.com/other/file/iPhone1,1_3-1-2_7D11_Restore/343202.htm Then in step 4, choose this file, not the first one you downloaded and used to back up your phone. The rest of the steps will work just fine.
grumpytico
grumpytico - August 12, 2010 at 1:59am
Thanks for this info!
fernando_a
fernando_a - May 30, 2011 at 9:26am
Got it... Thanks!!! I did it on 2 different iPhone2G devices, and both are working perfectly. Just make sure you use the file "iphone1, 1_3.1.2_7D11_Restore.ipsw" as user "m" earlier pointed out. Good luck!
jones
jones - July 2, 2010 at 10:56pm
It just doesn´t work! Redsn0w says "unable to recognize specified IPSW", I followed all instructions, had 3.1.2 and was trying to put 3.1.3 - the tutorial seems wrong, for my disapointment!..... didn´t do anything wrong.. any1?
Gigawatt
Gigawatt - July 3, 2010 at 8:06am
Run redsn0w 0.9.4 and click on browse. Point it to the iPhone OS 3.1.2 firmware you just copied to your desktop. Make sure your iPhone or iPod Touch is already updated to OS 3.1.3
sky_finder
sky_finder - May 31, 2010 at 11:17am
Total confutation....what is the tutorial is going for... U put there to download 3.1.3 7E18 but U select 3.1.2 7D11 (also in windows tutorial) but U download is not the firmware. The other thing is not going for DFU mode. Is it down grade to 3.1.2 or just unlock. Pleas clear this.
vxs
vxs - February 19, 2010 at 12:16pm
hi, can i follow this procedure though I have a 2G still on 1.1.3 with 04.02.13:G? thanx for helping me out.
quicknight
quicknight - February 15, 2010 at 1:28am
I apologize in advance if this is a repost, but I have not been able to find a solution to my "unique" problem. I purchased a USED iPhone 2G from a coworker and I was successfully able to jailbreak (blackrain) and unlock (bootneuter) the phone to use an AT&T gophone SIM card. The OS seems way slower (to be expected, I guess) than my 2nd Gen 32GB iPod Touch. I should say that I am a Sprint customer, using a Treo Pro and I only wanted to get the iPhone because of the camera, bluetooth, and built-in earphone and transmitter. I was using Vonage Mobile (free unlimited domestic calls in the US--I have actually tethered it to the Treo Pro and gotten decent call quality at times!) for the iTouch and discovered that in order to activate the iPhone version, there was a test call that needed to go through, hence the goPhone SIM and the unlocking process. Back to my problem. I have been unable to sync the device to iTunes and download my songs to the iPhone. It wants me to restore the phone and says that an iPhone (with my coworker's phone number) has already been synced to this computer. The reason I say my issue MAY be unique, is because most of the posters with unlocked iPhones seem to have "legit" AT&T iPhone accounts which is what I suspect may be my issue. My last resort, of course, is to restore the phone back to factory state, but I really don't want to lose my programs and such. I do have Pandora and Slacker, so I can listen to music most of the time, but I don't want to be restricted to wi-fi, since Edge is not really a practical option. ($20 for 100mb, and it is a pain to configure without a T-Mobile SIM card). So, again, what I really want is to sync my jailbroken, unlocked iPhone 2G to iTunes. Any suggestions?
flesssbleue
flesssbleue - February 14, 2010 at 9:48am
Hi iPhone is now 3.1.3 without unlock solution. Is it nevertheless possible to upgrade in 3.1.2 and jailbreak and unlock in this version ? using which tutorial ? manythanks for help iPhone 2G - V3.0.1
aldodl
aldodl - February 2, 2010 at 6:18pm
Hey, now y have NO SERVICE message with my usual chip. Please help.
shaq
shaq - February 1, 2010 at 6:42pm
will this work for the newer models starting with MC.
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS