February 21, 2024

Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Posted August 29, 2008 at 3:19pm by iClarified · 239135 views
EnglishSpanish
Estas son las instrucciones sobre la forma de su fuga 2.0.x iPhone 3G usando WinPwn 2.5 para Windows. Se han actualizado para el iPhone firmware 2.0.2.

Para seguir este tutorial es necesario tener instalado iTunes 7.7 (asegúrate de reiniciar el sistema). Además, es posible que tenga que descargar e instalar. Net Framework, si usted está en Windows XP. Por último, asegúrese de desinstalar completamente cualquier versión anterior de WinPwn. Gracias a CMW para toda su ardua labor en este!

Un Paso
Crear una carpeta en el escritorio llamado Pwnage. Lugar en que Winpwn 2.5 (mirror) y el último firmware 2.0.


2.0.2 (3G): iPhone1, 2_2.0.2_5C1_Restore.ipsw
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Dos
WinPwn instalar haciendo doble clic en el archivo ejecutable. Una vez que se ha instalado WinPwn pondrá un icono de acceso directo en el escritorio. Haga doble clic para iniciar la aplicación.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Tres
Una vez que ha abierto WinPwn haga clic para activar el iPhone 3G.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Cuatro
A continuación se le pedirá que seleccione el firmware que desea utilizar. Ello haga clic en la flecha verde derecha en la parte inferior derecha de la ventana.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Cinco
WinPwn le preguntará si está usando un transportista oficial. Lo más probable es que tendrás que hacer clic en el botón verde pulgares.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Seis
WinPwn le preguntará si desea utilizar la costumbre de arranque / recuperación de imágenes. Haga clic en el botón verde pulgares hasta si quieres.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Siete
Ahora podrá seleccionar la imágenes personalizadas. Haga clic en el iPhone a la izquierda para seleccionar el logo de arranque. Haga clic en el iPhone a la derecha para seleccionar el logotipo de la recuperación.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Recuerde las normas para ellos: el formato RGB o en escala de grises con canal alfa y la dimensión inferior 320x480. Si desea utilizar el iClarified que se pueden encontrar aquí: Inicio Logo , Recuperación Logo

Haga clic en la flecha verde para continuar.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Ocho
WinPwn ahora buscar su archivo de firmware ipsw. Si no puede encontrar que se le pedirá a la búsqueda manualmente. Haga clic en el botón verde pulgares hasta entonces Pwnage navegar hasta la carpeta en el escritorio y seleccione el ipsw que ha descargado en el paso uno.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Nueve
WinPwn ahora construir su ipsw.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Diez
Una vez que su costumbre ipsw se ha construido WinPwn le preguntará si desea ver las instrucciones de poner el iPhone en modo DFU. Haga clic en el botón verde para el pulgar hacia arriba o si el botón rojo para los pulgares hacia abajo no.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Once
WinPwn le pedirá que conectar el iPhone a través de USB y asegúrese de que su apagado. Ello haga clic en el botón verde pulgares.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Doce
WinPwn decir entonces listo para comenzar su Pwnage. Haga clic en el verde OK el botón.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Trece
Estar dispuestos a seguir las indicaciones ahora. Se le pedirá que mantenga el botón de inicio y el botón de encendido durante 10 segundos. Entonces, tendrá que soltar el botón de encendido y mantenga pulsado el botón de inicio durante 10 segundos para entrar en DFU.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Catorce
Una vez que iPhone está en modo de DFU WinPwn se iniciará el proceso de Pwnage.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Usted será informado cuando se ha completado Pwnage.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Observe que el iPhone mostrará una "Listo para restaurar personalizado IPSW" mensaje.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Paso Quince
iTunes ahora le pedirá que se encuentra en modo de recuperación.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Mantenga presionada la tecla MAYÚS y haga clic en el botón Restaurar en iTunes.
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Una ventana emergente aparecerá pidiéndole que seleccione el firmware. Seleccione el archivo de firmware personalizado que hemos creado usando WinPwn a continuación, haga clic en el botón Abrir. ** NOTA: WinPwn colocado el Custom archivo de firmware en la carpeta "Mis documentos".
Cómo Su 2.0.x Jailbreak iPhone 3G (Windows) [WinPwn 2.5]

Su iPhone será restaurada a la jailbroken 2.0.x de firmware de tu elección!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
You must login or register to add a comment...
Florin
Florin - January 8, 2010 at 2:22pm
Not working at all. I get an error from winpwn and then it shuts down. Every time. With every firmware version.
spencersoon
spencersoon - April 25, 2009 at 10:27am
anyway this jail break is full jail break ? require any turbosim after that ? cos i just done my pwnage 2.2.1 ! yess its succesfully unlock it but it still require turbosim to
John
John - January 1, 2009 at 4:51pm
when im in dfu mode, and my screen goes white, with no pinnapple...Do you need to see the pinapple or what? cause i proceeded to install the custom file that gave me cydnia and installer4. is that it? but my contacts ect. are gone. what happened?
LALAL
LALAL - December 4, 2008 at 12:48am
When i go to DFU mode, my iphone goes to white screen and the text beside the winpwn says that my iphone when to recovery mode after it went to DFU. Does anybody know how to fix this?
Tara
Tara - November 28, 2008 at 6:26am
Knight: Seems like your custom IPSW was a problem. You can restore your phone to the original firmware (the firmware the phone came with) and then try it again. The other choice is restore the phone to 2,1 firmware through i-tunes and then jailbreak it using newer method posted at iclarified. This method is simpler and faster. I hope it helps.
Knight
Knight - November 28, 2008 at 4:18am
Hi tara I am stucked on step 14 what should I do plz hellllp Do I need to wait more , I ve been waiting for 5 min now helllp plz anyone
Tara
Tara - November 27, 2008 at 11:40am
KNIGHT: If the phone is already activated and unlocked by your acrrier then jailbreaking will not lock your phone. Jailbreaking will only add cydia and installer4 for downloading FREE software. Enjoy
Knight
Knight - November 27, 2008 at 9:58am
Plz I want help I have IPHONE 3G officially unlocked with 2.0.2 If I jailbreak it is the I PHONE going to be locked on AT&T Sim please answer me
Pamela R.
Pamela R. - November 11, 2008 at 5:52pm
Hi, i have my iPhone 3G already unlocked but i was trying to jailbreak it and i got stuck in the step 9! Because when is searching for the ipsw a massage popup and says that it couldn't find it because it has and invalid hash.. I don't know what it is! but i think its because i started the procces with a 2.0 firmware.. Is that the problem?? HEEEELLLLPPP MEEE PLEASEE!
wreckers
wreckers - October 18, 2008 at 9:31pm
too many bugs, too much bugginess in the process, this is not streamlined at all. I am surprised if this really worked for anyone, I tried it this about 2 weeks ago and ended up having to restore my phone with the original apple software. it froze somewhere around step 14 and the application crashed on me, same thing just now. There has to be a better way to jailbreak this is not working.
Richard
Richard - October 18, 2008 at 9:11pm
my computer is on step 14 and the progress bar is done, but it doesn't do anything. should i wait until it goes to the step 15 screen or just start itunes
appus
appus - October 14, 2008 at 5:05am
i am having 2g phone. it completes step 14th.. and nothing happening afterwards. it is not informing the stuff is done. But, it shows a window in iphone with iphone logo and Ipwned with WinPwn 2.5. So what do i do next ? iTunes not recognizing after this step........ please throw some light. thanks in advance. appus
Tara
Tara - October 9, 2008 at 9:14am
allexgomes: i-phone 3G can not be unlocked. stop wasting your time. Follow the instructions carefully.
allexgomes
allexgomes - October 8, 2008 at 10:11pm
hi, i try to unlock my iphone 2.0 x 3G with WinPwn 2.5 and didnt work. I already unlocked a 2.0.2 X 2G and its working perfectly, but the 3G is not. I did all the steps, and when i instal the sim card it shows no signal, that means it still locked... Can someone help me with that PLeasssssseeeeeeeee... Thanks
badassindian
badassindian - October 1, 2008 at 12:32pm
Hey i used latest update from winpwn, somehow it didnt work on windows vista. I was able to unlock one iphone 3G. But When i again used same method to unlock second 3G iphone, it didnt work i did same steps 3- 4 times , now the phone is jailbreak , as it does accept an indian sim, while phone was from optus australia. I dont get to connect it to any indian gsm provider, it dosent connect . Neither it shows invalid sim. And in network i dont get any info on 2G network . While the other iphone is working fine it was from virgin store , australia, i am guessing if the error is due to fact it is of a different company. I also tried 2.0.2 version still stuck what to do??
Kwame
Kwame - September 30, 2008 at 4:07pm
Hey Many, I got the same message. No SIM card installed Install an unlocked and valid SIM to activate this phone. Mine's a 16B 3G from AT&T How did you solve yours?
Dion
Dion - September 20, 2008 at 6:27pm
Hey man,i am from singapore and just when thru ur tutorials.Everything is gd and i am trilled with it. Thanks so much. I have spend 5 hours looking for tutorials and u r the man.
Mady
Mady - September 20, 2008 at 11:45am
i tired doing this again,it said ur iphone is being jailbroken...n the apple sign came on the iphone ipwned 2.5 was written.it was loading ,n suddenly it stuck...nuthin happend for 5-6minz... nw thtz der on d screen,it doesnt go...myiphone doesnt strt...plz HELP???
Mady
Mady - September 20, 2008 at 4:21am
I updated my iphone from 2.0 to 2.0.1 as told in this topic,bt nw it says, insert a unlocked and valid sim to activate iphone? do i have to insert ATnT sim card or any sim card wud work?
jazzydiva
jazzydiva - September 19, 2008 at 12:24pm
Me and my hubby both have the 3G 16GB phones. I see the instructions for jailbreaking them. I will say that I am a bit nervous but I am definitely going to try it. I see that some people had problems having service afterwards. What do I need to do to try and make sure that doesn't happen. How did you solve your service issues @ iguy and Coq?
71 More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS