March 25, 2023

Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

Posted July 3, 2009 at 1:14pm by iClarified · 284875 views
EnglishGermanHebrewIndonesianRomanianSpanish
Im Folgenden findet Ihr eine Step-By-Step Anleitung, um auf Eurem iPhone 3GS einen Jailbreak durchführen zu können. Zum Einsatz wird dabei GeoHots neue Software PurpleRa1n unter Windows kommen. Wenn Ihr fertig seid, könnt Ihr hinterher den Unlock einspielen. Eine Unlock Anleitung findet Ihr unter hier.

Dies ist eine frühe Version des Jailbreaks, weshalb Applications wie Winterboard noch nicht funktionieren. Sollte dies wichtig für Euch sein, könnte es ratsam sein, auf den Jailbreak des iPhone-Dev-Teams zu warten.

Diese Anleitung funktioniert für uns hervorragend unter Windows XP, nicht jedoch unter Windows Vista. Ihr könnt es gerne unter Vista ausprobieren, denkt jedoch dran, dass, falls etwas schiefgeht, Ihr ein Restore Eues iPhones durchführen müsst (Anm.: des Übersetzers: nehmt XP und vertrödelt nicht Eure Zeit mit Vista Experimenten!)


1. Schritt
Macht Euren Webbrowser auf und geht an folgende Adresse: http://www.purplera1n.com. Klickt dort auf das Windows logo.
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

2. Schritt
Dann speichert die Datei auf Euren Desktop
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

3. Schritt
Doppelklick auf die purplera1n.exe Datei, die auf Eurem Desktop liegt. PurpleRa1n startet dann
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

4. Schritt
Klickt auf den großen make it ra1n Knopf
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

5. Schritt
Das iPhone wird nun in den Recovery Modus versetzt. Ihr werdet in dieser Zeit anstatt des normalen Recovery Logos ein Bild von GeoHot auf Eurem iPhone Display sehen.
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

PurpleRa1n erledigt alle notwendigen Schritt. Danach führt das iPhone selbständig einen Reboot durch.
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

6. Schritt
Nach dem Reboot befindet sich ein neues Icon auf dem SpringBoard. Die Applikation heißt Freeze. Diese bitte anklicken.
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

7. Schritt
Sobald Freeze geöffnet ist, klickt auf Install Cydia.
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

8. Schritt
Nachdem die Cydia Installation abgeschlossen ist, führt bitte einen Reboot durch
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows) Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

9. Schritt
Nach dem Reboot könnt Ihr Cydia starten. Cydia wird die erforderliche Updates herunterladen und installieren. Danach könnt Ihr nach dieser Anleitung den Unlock durchführen und Euer iPhone 3GS freischalten.
Jailbreak Anleitung für iPhone 3GS mithilfe von PurpleRa1n (Windows)

ANMERKUNG*: Um Freeze vom SpringBoard zu entfernen, könnt Ihr CyDelete aus Cydia verwenden. Eine Anleitung dazu wird in Kürze folgen.

DANKE*: Ein großer Dank geht an GeoHot für seine Arbeit, die diesen Jailbreak erst möglich macht. Ebenfalls danke auch an die anderen, die mitgeholfen haben wie chronic und das iPhone-Dev-Team und an Mateen für die Screenshots.

Translation provided by: Incomplete-News.com - What Other Media Don't Tell...
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
You must login or register to add a comment...
Tbomb
Tbomb - February 25, 2010 at 10:16am
This blackrain purple rain software did not work on my i phone.... the phone tried starting up but then turned off .... and never turned on again....
Daniel
Daniel - October 18, 2009 at 5:49pm
Great tutorial. However, I'm encountering the following problem. I have a factory unlocked 3gs 16gb with 3.0.1. After running purplerain and receiving the success message (Windows PC), I saw that I did not have any new icnon on my iphone. The purplerain log file shows the following: *** INFO: welcome to blackra1n for windows INFO: loaded dll at C:\Program Files\Common Files\Apple\Mobile Device Support\bin\iTunesMobileDevice.dll INFO: button clicked INFO: internal device callback called INFO: callbacks registered INFO: sent enter recovery command INFO: internal recovery callback called INFO: unregistered normal mode callback INFO: go go gadget ra1n INFO: send command started INFO: file opened ioctl: 1 INFO: command setenv auto-boot true sent INFO: send command started INFO: file opened ioctl: 0 INFO: command saveenv sent send payload: 0 INFO: start sending exploit ioctl: 0 INFO: exploit closed 0 sent exploit INFO: send command started INFO: file opened ioctl: 0 INFO: command geohot sent send picture: 0 INFO: send command started INFO: file opened ioctl: 0 INFO: command setpicture 0 sent INFO: send command started INFO: file opened ioctl: 0 INFO: command bgcolor 1 1 1 sent send ramdisk: 0 INFO: send command started INFO: file opened ioctl: 0 INFO: command geohot sent INFO: I JUST DROPPED IT LIKE ITS HOT INFO: unused callback called WARN: wtf who called this? INFO: global callback finished What am I doing wrong? Thank you.
markymark888
markymark888 - September 25, 2009 at 4:28am
Does anybody know if purplera1n will work on 3.1, I've got a 3gs
me
me - September 25, 2009 at 1:27pm
No it will NOT work with the 3.1 update!!!
markymark888
markymark888 - September 25, 2009 at 2:57pm
Thankyou, I don't want to be a pain but do u know roughly when the jailbreak comes out for 3.1, and I apologize again for being a pain thanks
Rome
Rome - September 9, 2009 at 6:19pm
Everyone, just wait for the new 3.1 jailbreak. No use of doing this if another software jailbreak coming for the 3.1.
markymark888
markymark888 - September 24, 2009 at 7:49pm
Could u tell me pls if purplera1n will work on this new 3.1 firmware answers much apprieciated thanks
Mr. No WIFI
Mr. No WIFI - September 9, 2009 at 6:08pm
Sorry, I know this is probably somewhere in the threads but... jailbroke my 3GS... using purple snow. (didnt want to start from scratch with red snow).. now WiFi doesnt work... any ideas?
Rome
Rome - September 9, 2009 at 6:14pm
You should just wait for the new jailbreak for 3.1 and restore your phone but if you really want to do a jailbreak for 3.0.1 then Redsnow is the only software that works and not Purplerain.
phukt88
phukt88 - September 8, 2009 at 7:40pm
junk it just freezes pretty gay since the makers cant even reply to the comments
leftyguns
leftyguns - August 27, 2009 at 2:50pm
purplera1n does not work on versio 3.0.1 but redsnow will. you need an XP machine i could not get it to work on vista. dl the files on an xp machine and jailbreak from that and it works
ichyowie
ichyowie - August 27, 2009 at 1:39pm
This purplera1n is GARBAGE! I have tried using it and it freezes when it is rebooting. I have not had any problem using redsn0w, however, I was trying purplera1n because my phone kept crashing when I downloaded Winterboard/Mobliesubstrate using redsn0w. I figured using purplera1n would allow me to install Winterboard, bit, it keeps freezing up. I have restored more then 4 times and purplera1n DOES NOT WORK. If anyone can help, great, if not, GEOHOT, your program SUCKS. I gave you the benefit of the doubt, but, back to the Dev-Team I go.
Loveholic777@gmail.com
Loveholic777@gmail.com - August 17, 2009 at 9:33pm
After all this, it will not reboot...it stays with that guy picture forever....what do I do? I did install the newest version of firmware..stupid....Please Help....
Shawn Murphy
Shawn Murphy - August 22, 2009 at 4:22am
Put your phone in DFU Mode, Then restore your iPhone. The video below says how to do this. http://www.youtube.com/watch?v=ofpinyGlQ8I
leftyguns21
leftyguns21 - August 13, 2009 at 10:17pm
i stupidly installed the new update for the iphone 3gs and it wiped my jailbreak clean. now when i try via PurpleRa1n it gets to the point where its waiting on a reboot but it does nothing? anyone know how to get it back up again?
Loveholic777
Loveholic777 - August 17, 2009 at 9:31pm
dammmm...I did the samething....is there any other solution?
alexisrobbie
alexisrobbie - August 12, 2009 at 11:45am
my iphone hang after installing the purplerain
Jay
Jay - August 5, 2009 at 2:46pm
This worked like a charm on my Rogers iPhone3GS. Thanks a lot!
Chuck
Chuck - July 22, 2009 at 4:15pm
You can delete Freeze by installing CyDelete (in Cydia) After a reboot/respring you should go to Settings -> CyDelete -> Enable “Non-Cydia Deletion” Then you tap(+hold) on Freeze; Click on the X and it will remove CyDelete. :)
GetRidOfFreeze
GetRidOfFreeze - July 12, 2009 at 11:14am
HOW DO I GET RID OF FREEZE???? CYDELETE DOES NOT REMOVE IT.
101 More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where to Download iPod touch Firmware Files From
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS