Como actualizar o iPhone 4 sem actualizar a Baseband (Mac) [4.3.1]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted April 3, 2011 at 1:20pm by iClarified
Este tutorial vai mostrar como actualizar o iPhone 4 para iOS 4.3.1 sem actualizar a baseband usando o TinyUmbrella para Mac.
Actualmente existe um constrangimento com as versões antigas do baseband tais como 1.59.00 e FW 4.3.1. Até à actualização do ultrasn0w, no indicador no nível de rede apenas se verá uma barra.
Nota importante: Este programa APENAS funciona no iPhone 4!
Primeiro passo Baixar o TinyUmbrella de here. baixar também o software do iPhone 4 iOS 4.3.1 que pode ser encontrado em here.
Segundo passo Fazer duplo clique no ficheiro TinyUmbrella.pkg e seguir os passos necessários para a instalação
Terceiro passo/b] Duplo clique para executar o TinyUmbrella na pasta das aplicações.
SQuarto passo Verificar que o equipamento está ligado, e o Umbrella detectou o tipo de equipamento e o seu software.
**Se não guardou o SHSH blobs do iOS 4.3.1 então clique em Save SHSH. verifique que guardou com sucesso antes de continuar.
Quinto passo Carregue Start TSS Server e certifique-se que não deu qualquer erro.
uma vez que The TSS Server está "running" correctamente, umbrella encerrará o iTunes. deixe o TinyUmbrella aberto.
Se deu algm erro, NÃO continue. O Restore não funcionará se o TSS server não poder ser iniciado.
Sexto passo/b] Abra o iTunes cliquando no seu icon na dock.
Mantenha pressionada a tecla Option e clique em Restore
Seleccione o ficheiro do seu iPhone 4.3.1 (que baixou anteriormente) na janela que abriu e cliquem em Open.
Clique Restore para iniciar o restauro do seu aparelho.
Step Seven O iTunes deve dar o erro 1013. Isso é o que queríamos, como poderá verificar a baseband não foi actualizada :) Clique Ok e feche o iTunes.
ISe der o erro 16XX então tente entrar no modo DFU e siga para o passo 5. Se o restauro não terminar com o erro 1013, isso significa que a baseband foi actualizada. Isso ocorre porque não tinha o TSS server a funcionar OU actualizou sem o TinyUmbrella OU porque está a trabalhar com um aparelho DIFERENTE do iPhone 4.
Oitavo passo O Fix Recovery no TinyUmbrella não funciona nas últimas versões de firmware. Baixe o programa Fix Recovery para conseguir sair do recovery mode no 4.3.1 do endereço here.
Extraia o ficheiro fazendo duplo clique no ficheiro que baixou.
Faça duplo clique no programa fixrecovery43 da pasta onde extraiu o ficheiro.Durante este processo verá no iPhone 4 um texto a correr.
Nono passo O seu iPhone estará agora na versão 4.3.1 sem que a baseband tenha sido actualizada! Se tiver a baseband 1.59.00 poderá agora desbloquear usando este tutorial).
**Obrigado ao semaphore pelo seu trabalho nesta ferramenta
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Hi. I need Help. I'd like to update my jailbroken iPhone 4 (9A405 MC608L firmware 04.10.01) actual os: 5.0.1 to 5.1.1. I tried with redSn0w and i couldn't
I got this error after upgrading Jailbroken and Unlocked iPhone 4 with baseband 01.59.00 on iOS 4.0.1 to iOS 4.3.3 using this guide:
"Unable to find gBdevList
Unable to find fs_mount
Unable to find fs_unmount
Unable to find fs_load _file
Greenpois0n initialized"
It was a mess to fix it but I was lucky enough to find this post that save my life and USD 400 that I paid for my iPhone:
These are the steps that I followed:
1- Open Tinyumbrella and click Fix Recovery
2- While it is launching Greenpois0n go to the terminal and run ./irecovery -s a couple of times. That stops Greenposon to load and the iPhone will get a white screen.
3- Then I opened Redsnow, Extras and click on PWNED DFU.
4- Finally I Restore from iTunes a Custom ipsw 4.3.3 created with Pwnage
So I followed the steps and I have managed to upgrade ro 4.3.1 with the baseband the same at 1.59.00. But on my phone there is no cydia app to be found. Once I update the version am I supposed to JB the phone, but wont that update my baseband as well. Anyone have any ideas.
Hey everyone! I was wondering if this works with Verizon's 4.2.7? I keep trying to downgrade to 4.2.6, but its not allowing me to. Even after TinyUmbrella, 74.208.10.249 gs.apple.com, and DFU mode. I tried doing this method a bunch of times but kept getting the "Setting to configuration 1 Setting to interface 0:0 opening device 05ac:1281... " thing on the recoveryfix. I haven't tried putting it into DFU mode during that time, so I'm going to try again soon, but I'm also wondering if it has something to do with me being on my college's internet. Any suggestions?
Hi everyone. I've got stucked on RECOVERY MODE after step 8.
Received error 1013 with no problems but, when i had to use TinyUmbrella FIX 43, the terminal keeps looping on "interface 0:0..." and cant get out of recovery.
Anybody could help me please? I will appreciate so much.
Phone was in 4.0.1. bb 01.59.00
Upgraded to 4.3.2, trying not to change de bb, using this guide.
Thank you!!
Question before upgrading - April 16, 2011 at 4:23pm
Anyone could tell me if i'w have any problem upgrading my unlocked and working iPhone 4.0.1 baseband 01.59.00 using this tutorials.
I've seen that there was some issues with ultrasn0w that had been fixed, but i'm a little bit afraid of beeing without service.
Is there any way to backup applications?
Hope anyone could help me. Thanks
Hi!
i'm usin TinyUmbrella to save my SHSH, but now, sudenly, TinyUmbrella stops working!
I'm a Mac user, the only way to open it it's showing it's pakages content and launching the tiny launcher. Opens but in the Log section shows me error 255, i run the Terminal commands to fix that, but TinyUmbrella wont' start... or showme the 255 error if i open it from the pakage content... any idea?
thanks!
Cannot Upgrade to 4.3.1 using tiny umbrella to secure my baseband getting error 1604 on a mac i am able to downgrade to 4.1 with no problem could someone help please
What's your BB (BaseBand) and your device?
You can make a custom firmware with Pwnage Tools to preserve your BB, but if you are using an unlocked iPhone (Software Unlocked) first look your BB to know if you can upgrade it!
i tried this today(4/6/11) and i read the comments and put my iphone 4 bb 2.10.04 into dfu mode and ran the fixrecovery43 and when terminal comes up at the end it says Reason: Incompatible library version: fixrecovery43 requires version 6.0.0 or later, but libcurl.4.dylib provides version 5.0.0. Trace/BPT trap logout
any help will be truly appreciated. thank you.
i updated my i4 to 4.3.1, after unlocking it with ultrasn0w, i can see 1 small singal bar, which i should cuz its not fixed yet. But i cant even see the name of my carrier, and hence can not make/recv calls.. and idea ?
I just updated my i4 to 4.3.1 preserving baseband 1.59.00, i am on official ATT carrier but am not getting cell service, no carrier information shows up. i cannot make or recieve calls. any ideas why?
Anyone else stuck on the terminal codes? I'm stuck here and phone stuck on plug into itunes
Setting to configuration 1
Setting to interface 0:0
opening device 05ac:1281...
and keeps repeating.
Ah, never mind. You have to put it into DFU. Just open up the batch file. The first thing the terminal window will say is to put it into DFU. So, while it is doing this "Setting to configuration 1
Setting to interface 0:0
opening device 05ac:1281...
"..
Just hold the home+power button in fo 8 seconds, then release the power button.. voila!
Thanks Fish. That worked like a charm. However, now the phone needs to be set up form iTunes. If I restore from a previous backup will I lose the jailbreak?
Good stuff. Well, if you have already jailbroken your device and also synced it with the old backup I recommend using redsn0w for the jailbreak as it does not require reinstallation of the firmware like pwnagetool.
hey fish, thanks a lot for the hint, worked like a charm for me, too!
the iphone i got is completely new and has not been activated it, so updating to 4.3.1 according to this tut was the first thing i did when i got it in my hands. could you give me a quick guid how to proceed in order to jailbreak and then unlock the thing? that would be amazing! thanks in advance!!
you jsut have to time it right according to what fish wrote.. 'while it is doing this "Setting to configuration 1 Setting to interface 0:0 opening device 05ac:1281... ".. Just hold the home+power button in fo 8 seconds, then release the power button' it most definitely works, I also had to try 2 or 3 times..
this is the message the fix is giving me:
dyld: Library not loaded: /usr/lib/libcurl.4.dylib
Referenced from: /Users/shyam/Downloads/fixrecovery-osx/fixrecovery43
Reason: Incompatible library version: fixrecovery43 requires version 6.0.0 or later, but libcurl.4.dylib provides version 5.0.0
Trace/BPT trap
logout
[Process completed]
Also I have no idea what Fish is talking about... Get ne one give me details?
Hey Fish, i've felt relax when you wrote never mind, but then im still couldnt kick out of recovery mode.
Im upgrading to 4.3.2 bb 01.59.00. I've got only to the error 1013 rapidly, but then, could compleate the last step.
The worst thing is that i only have the shsh for the 4.3.2 fw, nor any previosly one.
Can you say to me some magic words? would really apretiate sooo much.
Thank you!!
How long the restore process is supposed to last? The progress bar in my iphone do not pass little more than half bar and iTunes progress bar is stucked near the end process.. should I unplug and retry in DFU mode?
I did everything, but I can't get it out of recovery mode. I'm in DFU and run fixrecovery43, but in terminal it keeps repeating the same three lines:
opening device **ac:****...
Setting to configuration 1
Setting to interface 0:0
(The * just replace the numbers that are actually there)
I have solved it. I redownloaded the recovery tool and it worked. Make sure you enter DFU. If anything comes up (apple, etc.) when trying to enter DFU, then you did it wrong. It should stay a black screen until the lines, as described in the walkthrough, appear.
I keep having the same problem! I keep putting it in DFU mode, but the same lines keep showing up on the recovery fix over and over again. any more solutions/suggestions?
If you have the error in my first post, then you still are not going into DFU mode. When trying to put it in DFU mode, nothing should show up (apple logo, etc.). It took me at least 10 times to get the timing right. Timing is very important for entering DFU mode. Search for some hints about entering DFU. Eventually, you will get the timing right and you'll know it because the text will appear on the iphone screen as described in the walkthrough. I reiterate that anything besides this text means your timing is off. My timing varied only a second or two different but eventually it was right and everything went as described.