March 4, 2024
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Posted July 6, 2012 at 6:22am by iClarified
EnglishGermanPortuguese (Brazil)
Dies ist eine Anleitung, um bei einem iPhone, iPad oder iPod Touch mit defektem Home- oder Einschaltknopf in den DFU-Modus zu kommen.

Schritt Eins
Erstelle einen neuen Ordner auf dem Desktop mit dem Namen Pwnage.

Lege die aktuellste Firmware (hier herunterladbar: iPhone, iPad, iPod Touch) und die neueste Version von RedSn0w (von diesem Link) im soeben erstellten Ordner ab.


Extrahiere die RedSn0w Zip-Datei in denselben Ordner.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Zwei
Starte das Programm redsn0w aus dem redsn0w-Ordner, den wir vorher extrahiert haben. Rechtsklicke dafür auf die ausführbare Datei und wähle "Als Administrator ausführen" aus dem Kontextmenü.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Drei
Wenn RedSn0w offen ist, klicke auf den Extras-Knopf.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Vier
Wähle Even More aus dem Extras-Menü.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Fünf
Wähle DFU IPSW aus dem "Even more"-Menü.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Sechs
Du wirst aufgefordert, ein IPSW auszuwählen, mit dem du ohne irgendwelche Hacks oder pwnage-Schritte wiederherstellen kannst. Klicke auf OK.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Sieben
Wähle die ipsw Firmware-Datei, die im ersten Schritt heruntergeladen wurde, aus und klicke auf Open.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Acht
RedSn0w wird nun ein DFU Modus-IPSW erstellen.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Neun
Du wirst benachrichtigt, sobald das IPSW erfolgreich erstellt wurde. Klicke auf OK.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Zehn
Starte iTunes.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Elf
Verbinde dein Gerät mit dem Computer und wähle es aus der Liste auf der linken Seite aus. Wenn du nicht vor kurzem ein Backup durchgeführt hast, tu es jetzt. Als nächstes vergewissere dich, dass du auf der Übersicht bist. Halte Umschalt gedrückt und klicke auf Wiederherstellen.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Zwölf
Wähle das ENTER_DFU ipsw aus dem Pwnage-Ordner und klicke auf Öffnen.
Wie man in den DFU-Modus mit defektem Home- oder Einschaltknopf kommt (Windows)

Schritt Dreizehn
Nachdem das Gerät wiederhergestellt wurde, wird es im DFU-Modus sein. Der Bildschirm wird schwarz bleiben und je nachdem, mit welcher Firmware du wiederhergestellt hast, wirst du es jailbreaken können.

Besuche den iClarified Jailbreak Wizard für weitere Infos.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (103)
You must login or register to add a comment...
jenahc
jenahc - February 6, 2018 at 7:32am
"incomplete iTunes libraries" What does it mean?
vjen
vjen - January 30, 2018 at 2:58am
redsn0w not responding :(
Luisa
Luisa - September 25, 2017 at 12:36am
It didn't work because my Itunes doesn't regonize my iphone, it's like there isn't no phone... :(
faraheisake
faraheisake - November 12, 2017 at 9:46am
so how u do it? are you able to use your iphone by now? i also encounter the same prob!!
Victoria
Victoria - January 9, 2017 at 3:09am
HELP ME: After I do Step 7, it says program has stopped working. Why? I tried it 3 times and it's still doing it!
AMAURI DA SILVA JUNIOR
AMAURI DA SILVA JUNIOR - January 24, 2017 at 10:13pm
Happens the same here, Windows 10 64bit, my PC is an i7
HackerID1234
HackerID1234 - May 27, 2017 at 4:27pm
had the same issue.. tried multiple times, any response ? resoulution?
Alex Bates
Alex Bates - December 15, 2016 at 8:57pm
trying to restore but getting unable to parse ipsw, trying to restore iPhone 6
Gerbo
Gerbo - November 8, 2016 at 4:21am
In step 10 when you connect the device to the ps having launched iTunes you cannot select it as it needs you to respond on the ipod to allow access and you cannot as the ipod touch is disabled so you have no access to the screen prompt so how do I get around this.
Akshu
Akshu - September 30, 2016 at 3:27pm
HELP Me: I have iphone 4s 7.1.2 Jailbreak (Power button broken) Now I want to update it to 8.0 or 8.1 but not 9.X.X (phone will be too slow) So as My power button is broken I can't enter DFU mode. I have following quesitons: 1. Which firmware i should download to make dfu ipsw? Is it 7.1.2 or 8.0/(8.1) 2. I tried the normal regular method of updating through itunes and getting error 3194! So if I use this dfu method will be able to bypass? 3. Lets assume my iphone is updated to 8.1 will be jailbroken or i have to jailbreak it later ?
miChael mark
miChael mark - October 3, 2016 at 9:44am
1. You can not update to iOS 8 from general>software update if iOS 9 has already available. So it's better to use ipsw from firmware ios 8.x.x 2. DFU mode is the deepest type of restore you can do on an iphone. So if the regular recovery mode doesn't solve the problem, DFU mode may do the trick 3. When you restore iphone using DFU mode, you will lose the jailbreak. So, you need to rejailbreak it
Akshu
Akshu - October 3, 2016 at 10:00am
Hi. I found out from the lot of articles that to restore to old version compare to current so in this case iOS 8.x.x is not possible anymore ! Because Apple has to sign the ipsw then only itune can restore to that iOS. And apple stop signing the oldest version. So I can't update or downgrade to 8.x.x iOS anymore. Or update from 7.1.2 to 8.x.x ! Only I can update to direct latest available is 9.3.5 iOS.
lladnek
lladnek - January 15, 2016 at 7:21am
Hey when I downloaded the firmware it doesn't show up as a cube for me its heaps of unreadable files, please help
nakoa
nakoa - November 29, 2015 at 7:37am
I have tried basically everything to try to fix this and I cant do it my iphone 4s has connect to ITunes on the lock screen forgot password locked it up cant get redsnow to just accept the firmware however it refuses if I leave it zipped it doesn't show up if I extract it it shows up but makes me navigate through the folder and ends up blank
sj
sj - July 26, 2015 at 3:12pm
use 0.9.14b2 windows, worked for me
mateacido
mateacido - June 19, 2015 at 2:06pm
Amazing thx!
Athoof
Athoof - June 5, 2015 at 10:26am
Redsnow crashes when i select the firmwire. Please help!
sly
sly - June 22, 2015 at 8:27pm
hey, i've tried older version of redsnow and it worked
Thomas Mullett
Thomas Mullett - July 8, 2014 at 5:36pm
My name is Thomas Mullett I can't enter DFU mode like that or the other way. I have a broken middle button and I downloaded that peace of sofewere but it's not picking it up can you piz tell me why email me
Lia Terrier
Lia Terrier - July 5, 2014 at 8:36am
So where can i find the DFUmode firmware for my ipod touch 4g its 6.1.6
bobsburgers
bobsburgers - May 15, 2014 at 11:40pm
Thanks for the memories
marcelowalsh
marcelowalsh - April 14, 2014 at 9:27pm
i did every step of it and i did the jailbreak again using redsn0w and the firmware iOS 6.0.1 and well my ipod wont turn on its stuck on dfu mode what do i do help me lol
Marquis
Marquis - April 10, 2014 at 6:21pm
When i download the firmware for my phone it doesnt say ipsw. why is this?
Sukharshdeep
Sukharshdeep - March 26, 2014 at 2:12pm
Does this process jailbrakes the iphone?
vregier8
vregier8 - July 18, 2015 at 4:32pm
No, but in order to use most jailbreaks, you need to be in DFU mode. redsn0w is a good example of this.
Bobby Jacobson
Bobby Jacobson - March 16, 2014 at 2:03am
Thanks, You are right about the firmware, it helped me
JoJoguru
JoJoguru - February 22, 2014 at 5:57pm
so I replaced the screen on my daughters, friend's ipod touch 4g that has a broken power button, and I ma getting the all white screen. (white screen of death) so I cant do a reset or put in dfu mode for recovery. whenever I connect it to itunes it asks me for the passcode, but I cant enter it because it's nothing but a white screen. any suggestions on how to get this ipod to reboot without using the power button or the slider on the screen? any suggestions would be greatly appreciated. I'm at my wits end as to what to do. I can't even troubleshoot whats going on because I cant get this ipod to power off. HELP!!!!!!!!!!!
Breadand
Breadand - March 9, 2014 at 12:56am
If you can still connect the ipod touch to the computer and it recognises it, download tinyumbrella. Run it, and there should be an option to enter recovery mode. Once you're in recovery mode itunes will let you restore the ipod and you should be out of the white screen. :) source: it happened to me and this is how i fixed it.
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS