March 19, 2024
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Posted December 5, 2010 at 4:02am by iClarified
EnglishPortugueseSpanish
Estas instrucciones te permiten hacktivar tu iPhone utilizando el Modulo Artificial de Subscriptor (Subscriber Artificial Module - SAM) by sbingner. (Hacktivar = activar sin tener un SIM original)

El Módulo Artificial de Subscriptor [Subscriber Artificial Module (SAM)] engaña a tu iPhone y iTunes para crear Tickets de activación legítimos aunque estés "unlocked" con ultrasn0w. Esto significa que tendrás todos los beneficios de las aplicaciones "push" y la vida de tu batería se incrementa sustancialmente.

Necesitarás esto jailbreak normalmente antes de los próximos pasos.


Paso Uno
Presiona para lanzar Cydia desde tu SpringBoard.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Dos
Presiona para seleccionar Manage en la parte inferior de la pantalla
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Tres
Presiona el botón Sources grande.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Cuatro
Presiona el Edit botón en la parte superior derecha de la pantalla.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Cinco
Presiona el Add botón que aparece en la parte inferior izquierda de la pantalla.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Seis
Ingresa http://repo.bingner.com y presiona el botón de Add Source.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Siete
Presiona al botón Return to Cydia grande.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Ocho
Presiona para seleccionar Binger de tu lista de Fuentes ("Sources").
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Nueve
Elige SAM de la lista de paquetes (packages).
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Diez
Presiona el botón Install de instalar en la parte superior derecha de la pantalla.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Once
Presiona el botón Continue Queuing para comenzar la instalación.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Doce
Presiona el botón Bingner.com repo arriba a la izquierda de la pantalla.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Trece
Elige SAMPrefs de tu lista de paquetes ("packages").
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Catorce
Presiona el botón de Install (instalar) arriba a la derecha de la pantalla.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Quince
Presiona el botón Confirm (confirmar) para comenzar la instalación.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Dieciseis
Cuando haya completado la instalación, presiona el botón Restart SpringBoard.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso DIecisiete
Descarga RedSn0w 0.9.6b6 de aquí:
- Windows
- Mac

Paso Dieciocho
Extrae el archivo descargado y lanza la aplicación desde la carpeta descargada.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Diecinueve
Apreta en botón de seleccionar ("browse")
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veinte
Selecciona tu firmware actual del cuadro de diálogo que aparece y presiona Open ("abrir"). Encontrarás archivos para descargar cualquier versión de firmware here.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veintiuno
Si tienes un iPhone 3GS RedSn0w te preguntará si tienes el nuevo "bootrom". Presiona YES ("SI") si lo tiene, o presiona NO si no lo tiene.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veintidos
Una vez que tu firmware se haya verificado presiona el botón Next para continuar.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veintitrés
RedSn0w preparará ahora los datos para "Jailbreak".
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veinticuatro
Desde esta ventana selecciona las opciones de "Jailbreak" que quieras utilizar. Elije Deactivate y presiona Next
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM) Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veinticinco
Por favor conecta tu iPhone a la computadora y asegúrate que esté apagado, luego presiona el botón "Next"
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veintiseis
RedSn0w te guiará ahora en los siguientes pasos para poner tu iPhone en el modo DFU. Encontrarás más información sobre el "Modo DFU" aquí
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Presiona el botón "Home" y el botón "Power" durante 10 segundos.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Suelta el botón de "Power" y continúa presionando el botón de "Home"hasta que RedSn0w detecte tu iPhone.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veintisiete
Tu iPhone se reiniciará y comenzará a instalar el nuevo RAM Disk y Kernel.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM) Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Step Twenty Eight
Una vez que esté completo, te avisará que RedSn0w finalizó. Presiona el botón de "Finish" (Terminar)
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Veintinueve
Presiona Settings en tu iPhone
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Treinta
Selecciona SAM en el Menú de Settings.
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Treinta y Uno
Presiona De-Activate iPhone ("Desactivar el iPhone")
Como Hacktivar tu IPhone Utilizando Subscriber Artificial Module (SAM)

Paso Treinta y Dos
Abre iTunes y deja que tu iPhone se active. Si iTunes dice "invalid SIM" ("SIM inválido"), necesitarás seleccionar manualmente el carrier apropiado utilizando alguno de los métodos que no sea "Automatic" y selecciona algún SIMID.

Puedes encontrar más información de SAM (en inglés) aquí
here
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (47)
You must login or register to add a comment...
Austin
Austin - January 11, 2013 at 3:16am
It wont let me add this source it says. Did not Find repository. The indicated repository could not be found. This could be because you are trying to add a legacy Installer repository ( these are not supported). Also, this interface is only capable of working with exact repository URLs. HELP!
shaheem
shaheem - April 26, 2012 at 12:56pm
IT's working for iphone4 canada(roges) gevey sim.version 5.0.1(9A405) modem firmware 04.12.01. but now my is not working to gevey also.pls help me soon as.
Shawki Bsat
Shawki Bsat - November 15, 2011 at 4:44pm
i don't have the option revert lockdown to stock in sampref!! how do i find it or get it?!
JBMonkey
JBMonkey - April 20, 2011 at 11:28am
I did as instructed. (I didn't even need to select a manual carrier -- iTunes immediately activated it as soon as I plugged in the iPhone.) The SAM Settings showed "Wildcard Activated". I rebooted, reinstalled boxcar, sent out a test email. But push notifications still don't work. I have an iPhone 3GS running 4.3.1 with baseband 04.26.08, jailbreaked with PwnageTool and unlocked with ultrasn0w.
jimninus
jimninus - January 13, 2011 at 1:19am
I have an iphone 3gs v 4.0 (8A293) BB 05.13.04 it was jailbroken using jailbreakme.com. I also have the battery drain issue after it was unlocked using ultrasnow. Do I just search for SAM in Cydia and install it on my phone? Or do I have to re-jailbreak and unlock my phone again? Thanks.
Reflex
Reflex - January 12, 2011 at 6:35pm
I followed every single step and still can't get things to work. My iphone is a croation tmobile one and even if a pick that carrier it still wont activate. Does anyone have an idea why?
awesomedonald
awesomedonald - December 26, 2010 at 1:40pm
i have done this and everything works fine except push notifications. What is the problem?
offsett
offsett - December 30, 2010 at 2:57am
enable Push in settings -.-
regac03
regac03 - December 14, 2010 at 11:36am
Hi, I followed all 32 steps on this post with a 3G on the TMobile network. Everything worked until the final step, the phone never activated. Now, when I plug the phone into iTunes it's not seen unless in DFU mode. If I try to 'alt' select my saved IPSW file, iTunes gives me error messages 1600, 1604, 0r 1610. I'm working on a Mac, so the option to use IREB is not available to me as far as I know. I would really appreciate some help!
offsett
offsett - December 21, 2010 at 6:08am
Are u trying to restore to Custom Firmware or Official IPSW?
Miguel
Miguel - December 11, 2010 at 6:25am
Hey all. Thanks for the tutorial. I did as said, and everything in the iPhone is working perfectly, more battery, push applications and so on. The unlock keeps working as before SAM, but iTunes still does not recognize my SIM. I tried with bundle name, and country and carrier, but itunes stays stuck in the non-compatible sim, Any help? please?
Gerry dela Cruz
Gerry dela Cruz - December 7, 2010 at 11:57am
Hi, already have my ipgone 3G iOS 4.1 activated using a custom firmware, unfortunately experience the quick battery drain issue and that is why i decided to apply BINGNER solution. Followed the steps showed from here, unfortunately now my phone carrier detection is very intermittent due to frequent searching state. already tried to set it in manual mode but still have the same result.
rrr
rrr - December 7, 2010 at 8:15am
Hey there! I'm trying to hacktivate my iphone 3gs 4.2.1 but my network doesn't permit to do it... Itunes says that my iphone should be damaged because it cannot be activated...
Zero
Zero - December 7, 2010 at 10:36am
You need to hacktivate with redsn0w or pwnagetool as usual and then do the steps in this tutorial....
Andrew
Andrew - December 7, 2010 at 4:17am
While we are grateful for this in theory, the execution is dreadful. The app has been updated three times in 24 hours and for me, while I have activated my phone in iTunes by selecting a different carrier in SAMPrefs, I still get told in applications that Notifications are turned off, even though I have them turned on. The developer's page is less than useful so we are the blind leading the blind. A lesson here that these things are released when the developer has them working, not when they are ready for millions of users worldwide.
Zero
Zero - December 7, 2010 at 10:39am
Agreed.... i still don't know if is it possible to do this or how can i do this on an iPhone 2G (on the website it says that is possible on any phone +3.0 fw)
saurabh khaira
saurabh khaira - December 6, 2010 at 12:55pm
My iphone is now stuck on the "connect to itunes" logo... dont know what to do??
Nels
Nels - December 6, 2010 at 8:50am
My iPhone is f/w 4.0.1 jailedbreak from jailbreakme.com can I install SAM and run redsnow to de-activate it? Or do I have to jailbreak it again this time using redsnow once I installed SAM?
Zero
Zero - December 6, 2010 at 9:20am
To use jailbreakme.com you need to be activated on an authorized carrier so there is no need to use SAM for you
Nels
Nels - December 6, 2010 at 9:38am
Ok, right now I'm on f/w 4.0.1 jailbeak from www.jailbreakme.com and I'm going to update to f/w 4.1 then jailbreak using limerain. Do I need to install SAM first before I update to 4.1? Oh, my phone is a 3Gs and is from AT&T but they're not my carrier just to let you know. Please advice!
Zero
Zero - December 6, 2010 at 9:56am
You can update to iOS 4.1 and you need to install SAM AFTER the restore.... If you use LimeRa1n to jailbreak your iDevice you need to be activated first. Use redsn0w (Mac / PC) or PwnageTool (Mac) since you are indeed hacktivated. LimeRa1n doesn't support hacktivation so if you try to restore to a stock iOS you will get stuck in the activation screen. Did you saved your SHSH blobs using Cydia or TinyUmbrella???
Nels
Nels - December 6, 2010 at 3:39pm
Is redsnow or pwange tethered or untethered?
Nels
Nels - December 6, 2010 at 5:26pm
Can I jailbreak 4.1 using redsnow because I only saw limerain or greenpoison and is redsnow untethered?
iSohrab
iSohrab - December 6, 2010 at 8:00am
it just work in 3G & 3GS in 4.x.x firmware
Zero
Zero - December 6, 2010 at 7:17am
How about for the iPhone 2G on 3.1.3???..... anyone?
iSohrab
iSohrab - December 6, 2010 at 7:59am
No it just work in 3G & 3GS in 4.x.x firmware
Zero
Zero - December 6, 2010 at 8:33am
And what about this?? # Option #3: my custom stockify program - works on any phone 3.0+ (same as #1) 1. With SAM and SAMPrefs installed; install openssh and secure shell into your phone. Run "stockify" and it will revert your lockdownd to a stock lockdownd 2. Reboot your phone
JBMonkey
JBMonkey - April 22, 2011 at 9:14pm
Any luck with the iPhone 2G? I can't get Push Doctor to work. So I'm wondering about SAM..
neonshad0w
neonshad0w - December 6, 2010 at 7:04am
Grabbed my unlocked iPhone 4 with my AT&T GoPhone SIM in it, installed SAM and SAMPrefs via Cydia. Opened redsn0w 0.9.6b6, opened 4.1 firmware, and saw no "Deactivate" LOST MY SERVICE WITH SAM INTALLED....removed SAM, now I have service, but still bad battery life. ANY IDEAS???
tsutekh
tsutekh - December 6, 2010 at 12:58pm
You have an unlocked phone, you have no need for SAM; this is to activate using other carriers' SIM....
ismail
ismail - May 1, 2012 at 8:53am
same here any solution ?
AGR
AGR - December 6, 2010 at 6:09am
Can't get push notifications to work :/ tried to do it again but now it won't activate with itunes. Also try this, WARNING - NSFW: go this url http://www.bingner.com/SAM somewhat of an inside joke?
Ken
Ken - December 5, 2010 at 7:54pm
Does it necessary to activate using SAM on an ultrasn0w unlocked iPhone which had already activated by an official AT&T sim card?
Pablo Junge
Pablo Junge - December 5, 2010 at 9:20pm
Push notifications not working after this
krisss
krisss - December 6, 2010 at 4:54am
Realy would like to know: I have an factory unlocked iPhone (belgium). I have jailbroken it and all seams to be working perfectly well. I suppose 'Push' is working. Do I need SAM?
fitochalita
fitochalita - December 5, 2010 at 2:19pm
hello!! this works with iphone 4??? firmware 4.1 or 4.2.1???? Or i still waiting?
iSohrab
iSohrab - December 6, 2010 at 5:32am
you must wait
Fitochalita
Fitochalita - December 6, 2010 at 2:19pm
Thanks 4 reply!!
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS