October 11, 2024

Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Posted November 23, 2010 at 11:46pm by iClarified
EnglishChinese (Simplified)Portuguese (Brazil)
Instruções de como Jailbreak seu iPad iOS 4.2.1 firmware usando RedSn0w para Windows. A Versão para Mac você encontra aqui.

Por agora você somente poderá fazer o tethered jailbreak. Isso significa que você precisara do programa Redsn0w's para reiniciar no modo hackeado. Se voce quer usar uma versão de firmware mais antiga você pode encontrar aqui um tutorial explicando no seguinte endereço aqui.

Primeiro Passo
Crie uma nova Pasta em sua areá de trabalho chamada de Pwnage


Baixe o arquivo RedSn0w's aqui e coloque-o na pasta Pwnage que você criou anteriormente. Baixe também a versão de firmware 4.2.1 e coloque-a na mesma pasta que criamos anteriormente.

4.2.1: iPad1,1_4.2.1_8C148_Restore.ipsw
Extraia o arquivo executável do RedSn0w e coloque-o na pasta que criamos anteriormente
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Segundo Passo
Conecte seu iPad no computador e logo em seguida abra o iTunes.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Selecione seu iPad. Agora pressione Shift e clique em Restaurar. A melhor opção neste momento e Restaurar para que o programa não crie espaço extra em seu iPad.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Navegue na pasta Pwnage( criada em sua area de trabalho ) e selecione a Firmware 4.2.1 ipsw. Pressione o botão abrir para continuar.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Terceiro Passo
Quando o iTunes terminar de atualizar o seu iPad, abra a pasta Pwnage(localizada na área de trabalho) e abra o aplicativo redsn0w.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Quarto Passo
Quando o aplicativo RedSn0w abrir clique no botão abrir.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Quinto Passo
Selecione a Firmware 4,2,1 ipsw (localizada em sua área de trabalho ) e clique em abrir.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]


Sexto Passo
Quando a Firmware for verificada clique no botão seguir para continuar.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Sétimo Passo
O aplicativo RedSn0w agora ira prosseguir com a preparação dos arquivos do Hack a ser aplicado.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Oitavo Passo
Nesta mesma janela você poderá selecionar que tipo de Hack que você deseja instalar. Assegure-se que o aplicativo Cydia esta selecionado e clique em continuar
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Nono Passo
Por favor conecte seu iPad no computador assegurando que o seu iPad esteja desligado e clique no botão proximo.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Decimo Passo
O aplicativo RedSn0w ira te guiar agora para que você possa entrar no modo DFU (um modo de programação). Voce poderá encontrar mais informações sobre o modo DFU aqui
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Segure os dois botoes: Home e Power por 10 segundos.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Solte o botao Power e continue segurando o botao Home aguarde que o aplicativo RedSn0w ira detectar o seu iPad
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Decimop Primeiro Passo
O seu iPad ira reiniciar.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Decimo Segundo Passo
O aplicativo RedSn0w agora começara a descarregar o novo Ram e Kernel.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

Decimo Terceiro
Quando o processo for finalizado você sera notificado. Clique no botão finalizar. Quando seu iPad reiniciar (uns 5 minutos ou mais) já estará Hackeado com o Cydia instalado.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]


IMPORTANT: Agora voce precisara do aplicativo RedSn0w para iniciar seu iPad no modo Hackeado. Simplesmente selecione Just boot tethered right now do menu e clique avançar.
Como Hackear seu iPad usandoRedSn0w (Windows) [4.2.1]

*Como sempre gostaríamos de agradecer o iPhone-Dev-Team pelos trabalhos e contribui coes para com a comunidade iPhone. Translated by Walter Dias.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (39)
You must login or register to add a comment...
mark
mark - February 4, 2013 at 10:34am
Throw Away your Ipad ! Thats It.
luizcoelho
luizcoelho - January 13, 2011 at 2:51pm
i've the 4.2.1 firmwire already instaled in my ipad. Do I have to do the restore process? Can I go directly and run REDSNOW???
Bio
Bio - January 10, 2011 at 4:39pm
every time i turn off my ipad i must tethered it? is there any way to keep it tethered always?
Bio
Bio - January 9, 2011 at 10:22am
hi, i restored my ipad but once im jailbreaking it using redsn0w i see a message "ctx error not found" then it keeps on saying please wait and it restart again and keep freezing on the apple logo. please help
the furb
the furb - January 1, 2011 at 11:40pm
i get through the jb process fine but when i try to reboot just tethered it looks like its working then just hangs at uploading kernal and the pineapple on the ipad and it just sits there then eventully reboots and cydia doesnt work so idk what im doing wrong must have tried it 15 to 20 times!!! any help is awesome thank you
Clarice
Clarice - December 25, 2010 at 5:59am
Hi..what is the meaning of ..."You will only be able to perform a tethered jailbreak at this time. This means you will need Redsn0w's assistance to boot into your jailbroken device. If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.
TheCoose
TheCoose - December 28, 2010 at 3:34pm
It means that anytime the device is powered off (hold the power button down and slide to shut off), you will need Red Snow to get it running again. If you're not comfortable with this, don't do it and wait for a non tethered version someday
Chris
Chris - December 13, 2010 at 10:29pm
I get stuck on the "Uploading ramdisk" portion of the JB. My iPad shows "Downloading Jailbreak Data..." but stays like that for a long time. I've tried multiple times running RedSn0w as an administrator and in XP SP3 compatibility mode to no avail. Not sure what I'm doing wrong, but I guess I'll soon try another computer. Any ideas?
Chris
Chris - December 13, 2010 at 11:02pm
Well, I just tried for the last time using XP SP3 compatibilty AND "run as administrator" from my Windows 7 PC. Looks like it worked PERFECTLY. I can't wait to unleash the power of this device!
Sherifftruman
Sherifftruman - January 11, 2011 at 3:24pm
I also had the same problem. I am on Win 7/64. I tried everything, including run as admin, doing it form the admin account, I even tried it on my WIndows XP 32 partition. IT never worked. I finally stumbled on a thread that said it had somethign to do with processor affinity settings on MP or Multi-Core systems. I started redsn0w, then opened Task Manager. FInd the redsn0w process and right click, go to Affinity and uncheck Processor 0. If you get access denied, make sure you are admin and that you have show processes from all users checked. Once the affinity setting is changed, then go back to redsn0w and keep going as instructed. Worked the first time after dozens if not scores of tries previously for me.
madmanC
madmanC - January 19, 2011 at 8:55pm
I also encountered the same problem on my Windows 7, but I tried running it as administrator and it got through. But my cydia is unable to start.
Eddie
Eddie - December 4, 2010 at 3:42am
I jail broke the iPad, installed few apps throughout installous and Cydia, was very happy, then Cydia had few updates, I did, next it went to reboot, and never came back to life, stayed on the apple logo for the whole day, a tried rebooting manually over 10 times and still same luck...hook it up to iTunes and it won't detect iPad, tried few times .. Battery dies, recharged it and took it to the apple store,, the guy there hooked it to a special software to restore the iPad, without iTunes detect. Glad to have back and but not jail broken yet, waiting maybe for a fix... Apple store guy didn't ask too much questions.. I told him after I installed the the version of the 4.2.1, this crash happened.. Service, free..
Nick
Nick - December 4, 2010 at 9:38am
I have the same problem, what I did was rejailbreak the Ipad and then when done do NOT download the cydia update choose ignore temperary and now it works great
Yll Shahini
Yll Shahini - January 8, 2011 at 7:42pm
yeah but HOW did you rejailbreak it every time i do the instructions (hold the power button for 10 seconds....) it shuts down and doesn't get detected by redsnow :S pls dear jailbreak user HELP ME D:
Titi
Titi - December 3, 2010 at 9:54pm
Thx for the tutorial and the replies! Helped me when i got stuck on limerain exploit! win 7 need to set compatibility to win xp and run as admin!
take too long to reboot
take too long to reboot - December 1, 2010 at 6:19pm
it takes too long to reboot. it seems forever after RedSnow process. please help if get into similar situation
gauri
gauri - January 15, 2011 at 2:15pm
Hi, its taking too long to reboot after redsn0w process and the apple logo has been there for more that 15minutes. Please help. does it take so long? is it normal or have i done something wrong?
Paul
Paul - December 1, 2010 at 10:07am
Hi I was able to JB Ipad on latest FW and run Cydia, and install all required packages for it, but my problem is that after I install SBsettings I'm asked to Reboot Device but when it reboot it gets stock on the Apple logo. Anyone else having the same problem or know how to resolve it? Thanks
Eddie
Eddie - December 4, 2010 at 3:35am
After I jail broke the iPad , installed few apps, then sbsettings, and reboot. IPad wouldn't come back, had the apple logo all night, the batteries died out . Next they recharged it with still apple logo on.. Problem, it wouldn't even detect the iTunes so I would restore... Had to take it back to apple store,, the genius bar, hooked it up to his laptop and had to do something special because it wouldn't detect itunes at the store too.. Finally the iPad started to restore by itself throughout the laptop but with no iTunes on or detected... Thankfully, iPad is up but haven't jail broke again, still waiting for fixes....
Paul
Paul - December 4, 2010 at 8:19am
Hi In my case what I did after the new jailbreak is when Cydia asked to Reboot don't click on the Reboot but do Switch Off on the ipad, after hoocked it to laptop, open Resn0w, selected the "Jut Boot tethered right now" and was able to start the ipad. All working ok since them. What the probably did in the shop to manage to get the laptop to detect it was start the Ipad in DFU mode.
TheCoose
TheCoose - December 28, 2010 at 3:00pm
Um, this is a tethered JB. if you reboot the iPad, you need to have it hooked up to and resteart using the redsnow and the ispw. if you don't know what i'm talking about, you are best of to wait until a non-tethered JB is released.
barok
barok - November 29, 2010 at 6:13pm
Stuck on 'Exploiting limer1ain' or something like that. Ramdisk never loaded
Nick
Nick - December 4, 2010 at 9:39am
I had the same problem, you should try from another computer, worked for me!!
bill
bill - November 27, 2010 at 10:06am
redsnow crashes?
Jo
Jo - November 27, 2010 at 3:57pm
For me also... On vista it crashes down, on win7 it won't work. Damn
Nick
Nick - November 25, 2010 at 6:39am
It doesn`t work for me either, step 12 uploading ramdisk gets stuck for hours and ipad just reboots and there is no cydia, can someone please help?
Ellen Leung
Ellen Leung - November 24, 2010 at 12:26pm
It does not work. Don't do it.
Dinu
Dinu - November 24, 2010 at 2:42pm
it doesn't work what exactly?
Micke
Micke - December 1, 2010 at 5:42pm
Update 1 : Windows 7 or Vista users often need to use XP or 98 compatibility modes when launching redsn0w (right-click)
AoS_HJ
AoS_HJ - December 1, 2010 at 7:23pm
Just wanted to thank you for the pointer. Quite obvious really but i never thought of it lol Thanks again :-D
Dinu
Dinu - November 24, 2010 at 10:25am
Safari is crashing after jaibreak. I'm trying now to un-jaibreak this, anyone know how to undo this ?
RC
RC - December 16, 2010 at 1:32am
do the last step under "Important Note:" run redsnow again and check the box "just boot tethered right now" and go from there
jipad
jipad - November 24, 2010 at 1:06am
Cydia does not work after jailbreaking.
Bryan
Bryan - November 24, 2010 at 1:44am
Same for me, i tried booting back but redsn0w just stops working.
jipad
jipad - November 24, 2010 at 1:57am
i don't know the reason too, i have to try do it many time even restore the firmware and do the jailbreak from stretch but the cydia still does not work... may be because the cydia does not work that's why i don't need to jailbreak again after rebooting my ipad.
jipad
jipad - November 24, 2010 at 2:56am
i got it working now. you need to re-jailbreak again but select the "Just boot tethered right now"
ipad123123
ipad123123 - November 28, 2010 at 1:11am
re-jailbreaking works.. thanks
neu
neu - December 18, 2010 at 7:25pm
after finished the redsnow and reboot (5mins or so), the cydia wont install on the springboard, only a white blank cydia, have tried 2 times
neu
neu - December 18, 2010 at 7:31pm
sorry my mad, it works after, re JB and "Just boot tethered right now"...sorry for spam
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Ventura
Where to Download iPod touch Firmware Files From
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS