Wie "jailbreakst" du dein iPhone 3GS, OS 3.0 mit RedSn0w (Mac)

POST

MAIL

Posted July 7, 2009 at 1:25pm by iClarified · 372504 views

Dies ist eine Anleitung wie du dein iPhone 3GS jailbreakst mit OS 3.0 Firmware, wenn man Redsn0w benutzt für Mac. Die Windowsversion findest du hier. Die iPhone-3G-Version findest du hier. Die iPhone-2G-Version findest du hier

Diese Anleitung zeigt dir wie du dein iPhone "jailbreakst" bevor man UltraSn0w installieren kann um dein iPhone zu "unlocken". Du findest eine Anleitung, wie du dein iPhone "unlockst" unter hier .

Step One
Erstelle einen Ordner auf deinem Schreibtisch, der den Namen Pwnage trägt.

Lade RedSn0w von hier und verschiebe die Datei in den Ordner Pwnage. Likewise, download the latest 3.0 firmware from below and place it in the same folder. Ebenso, lad dir die letzte 3.0 Firmware von dem untenstehenden Link und verschiebe die Datei in den selben Ordner.

3.0.0 (3GS): iPhone2,1_3.0_7A341_Restore.ipsw

Entpacke die Applikation RedSn0w aus der RedSn0w Zip-Datei in den Pwnage-Ordner.

Wie "jailbreakst" du dein iPhone 3GS, OS 3.0 mit RedSn0w (Mac)

Step Two
Verbinde dein iPhone mit deinem Mac und starte iTunes.

Wähle dein iPhone aus der Gerätelist in der linken Spalte. Halte nun die Taste Option gedrückt und klicke nun den Restorebutton. Diese Wiederherstellung solltest du durchführen, damit du nach dem Jailbreak deinen gesamten Speicherplatz zur Verfügung hast.

Wähle nun die IPSW-Firmware aus dem Pwnage-Ordner. Klicke den Öffnenbutton um weiter zu fahren.

*Bemerkung: Wenn du schon die OS 3.0 Firmware benutzt und an deinem iPhone noch kein Jailbreak durchgeführt hat, dann kannst du diesen Schritt überspringen.

Step Three
Wenn iTunes das Update an deinem iPhone auf die gewünschte OS 3.0 Firmware durchgeführt hat kannst du RedSnw0w.app aus dem PwnageOrdner von deinem Schreibtisch starten.

Step Four
Wenn RedSn0w aufgestartet ist klicke den Browsebutton

Step Five
Wähle die IPSW-Firmware aus dem Pwnage-Ordner auf deinem Schreibtisch und klicke Open.

Step Six
Wenn die Firmware akzeptiert wurde klicke den Nextbutton um fortzufahren.

Step Seven

Sei sicher, dass Cydia ausgewählt ist und klicke den Nextbutton.

Step Eight
RedSn0w zeigt dir nun wie du dien iPhone in den Wiederherstellungsmodus bringst. Trenne die Verbindung von deinem Mac zu deinem iPhone und schalte es dann aus. Dann drücke und halte den Homebutton während du dein iPhone wieder mit deinem Mac verbindest. Lasse den Knopf nicht los bevor RedSn0w dein iPhone erkennt und die Installation beginnt.

Step Nine
Dein iPhone startet nun neu.

Step Ten
RedSn0w lädt nun die neue RAM-Disk und den Kernel auf dein iPhone.

Step Eleven
Wenn die geschehen ist wird dich RedSn0w informieren, dass es alle Prozesse abgeschlossen hat. Klicke nun den Finishbutton. Wenn dein iPhone fertig ist mit dem Neustart (ca. 5 Minuten) wird dein iPhone erfolgreich den Jailbreak durchgeführt, Cydia und Springboard installiert, haben.

Follow iClarified

Olivia - January 18, 2010 at 1:55am

I've tried this three times but, after I finish each time the screen on my iphone goes black and won't respond so then I have to restore it using iTunes and Cydia is never there. Why won't it work?

Reply · Like · Mark as Spam

Paul R - October 17, 2009 at 1:45pm

Who ever can help me: Can i jail brake my Iphone 3G (3.0) using this tutorial which says that is made for iphone 3GS????? please if anyone can help, i will really appreciate it.

Pedro - October 21, 2009 at 11:25am

dude, there's a tutorial very similar to that in this site. and it's for the iphone 3g. i did it in mine, and it worked perfectly. glad if i helped.

taraya mccord - October 13, 2009 at 9:49pm

how can i restore the older firmware 3.0.1 from 3.1.2 without using itunes because that doesnt allow me to do it

Josh - October 13, 2009 at 9:52pm

unfortunately you are unable to at the moment, I believe. you upgraded too soon :(

4you - October 5, 2009 at 4:14pm

how can jailbreake my iphone 3gs version 3.1 i try many times whit this tutorial but says unable to recognize specified IPSW, i'm using redsn0w 0.8 and firmware iphone2,1_3.0.1_7A400 any help please

Jay - October 3, 2009 at 3:36pm

I did I jailbreak and unlock my iphone 3g using this(and another about unlock) great tutorial!!!! My iphone works perfect!!! Thank you very much!!!!!!

scared - December 17, 2009 at 10:59am

i'm waiting for it to reboot and its taking forever! I'm so scared it'll be locked or something! HELP~

joe - October 3, 2009 at 2:10am

the firmware for 3gs is a bunch of files how to i get it to look like the box ipsw

decarvalhod - September 30, 2009 at 3:03pm

I just got my iphone 3GS and it came with 3.0.1 FW. I want to Jailbreak and unlock it however I have a doubt. I have a mac and I know I should use RedSn0w, the only doubt I have is regarding if I should just go ahed open RedSn0w and select the 3.0.1 firmware (I already downloaded) and follow the steps or should I restore to 3.0 FW and then open RedSn0w an select 3.0.1 firmware? Thanks for all the help!

flowctrl - October 2, 2009 at 3:59pm

The comment in the article: ** If you would like to jailbreak on the 3.0.1 firmware you can follow these exact instructions; however, in Step Two restore using this 3.0.1 iPhone firmware file instead of the 3.0 one. Continue with the instructions as indicated.** Is not true. redsn0w only works with the 3.0 firmware. If you select the 3.1 firmware with it, it will say "Unable to recognize specified IPSW". So it appears that the only solution is to downgrade to 3.0. To make matters worse, iTunes no longer allows restoring to an IPSW of a version less than 3.1. So to downgrade or even install a new IPSW, you'll have to downgrade iTunes if you're using the latest version. I *assume* that downgrading iTunes will let you install older IPSWs, but I didn't test that myself. I'm hoping that the DevTeam releases a new redsn0w soon that accepts the 3.0.1 firmware.

Pedro - October 23, 2009 at 9:36am

I was just trying to downgrade mine 3gs from 3.0.1 to 3.0 with itunes 8.2 and failed. itunes won't let us do the downgrade.

36chambers - September 29, 2009 at 11:01pm

wow, cant say that uve made it easier enough!! ive had troubles in the past with this following alll the other guides on the net and i got a new iphone 2day, luckly enough i came over your guide! no problems what so ever done in minutes first go... thank you very much!!!!!

DAX - September 27, 2009 at 11:16pm

For the people having problems unlocking their 3G w/ 3.0.1, I tried following the instructions with no luck, so I downgraded from 3.0.1 to 3.0 and the it all worked perfectly JB and unlock! good luck

DAX - September 20, 2009 at 11:29pm

iPhone 3G on 3.0.1 I'm stuck in step 2. I've downloaded the A400 restore Ispw gile. I/\'ve resyored my Iphone via iTunes and have the 3.0.1 with 04.26.08 band. How do we use the A400 file in the second step, it says to open it, while the iTunes is restoring the phone, will the iPhone use this file from my computer to restore? On steps 3 and 5 it indicates to select the A341 restore file, do we, 3G 3.0.1 users, use this A341 files or select the A400 file on these steps??? Sorry but I need help///////

PIckerman - September 20, 2009 at 6:21am

Hey, I've got a 3GS 16Gb, bought outright from apple. It was on 3.0.1 when I bought it. I was successfully able to jailbreak it using redsn0w, without the need to restore in itunes 9 (it wouldn't let me restore to 3.0.1 anyways). The jailbreak works like a charm, with cydia and icy installed and all, but the battery life is a nightmare now!! It goes from full charge to power-off in less than 7 hours on standy!! The iPhone is also constantly heated as if it was processing something... (3G, wifi and bluetooth are all off) Any idea or similar cases? Your thoughts are most appreciated, as it's impossible to leave the house now that my battery dies on me every couple of hours :) Cheers.

DAX - September 20, 2009 at 11:34pm

Hi Pickerman, maybe you could help me.....please see my comment right obove yours, cheers.

user - September 26, 2009 at 8:38am

go to settings click on mail then turn off fetch new data , u will be fine for sure

matt - September 29, 2009 at 11:40pm

I have the same problem. Talking to a "pro" TOMORROW AT 5.00 EST.. WILL KEEP YOU POSTED - PLEASE LET ME KNOW IF YOU FIND A WAY- Apparently the way to do it is redirect the itunes apple responce to auriks server! good luck ( we have the exact same problem!)

sanoj2sanoj - September 17, 2009 at 1:14am

when i try to restore iphone 3g 32 gb ,that showing a message in itunes the device isnt eligible for the requested build

126 More Comments