April 23, 2024
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Posted February 3, 2009 at 11:25pm by iClarified
EnglishGermanGreekItalianKoreanNorwegianPortuguese (Brazil)RomanianSerbianSlovakSlovenianSpanishTurkish
Ово су упутства како да урадите unlock/jailbreak за ваш 2G iPhone на 2.2.1 iPhone фирмверу користећи QuickPwn за Windows. Пре почетка проверите да ли сте апдејтовали iTunes на верзију 8.0.2.

Први корак
Направите фолдер Pwnage на десктопу.

Скините ове фајлове и ставите их у фолдер Pwnage који сте претходно направили.
- QuickPwn-225-2.zip
- BL 3.9
- BL 4.6
- 2.2.1 (2G): iPhone1,1_2.2.1_5H11_Restore.ipsw


Распакујте QuickPwn-225-2.zip у Pwnage фолдер.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Други корак
Конектујте ваш iPhone за компјутер и покрените iTunes.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Селектујте ваш iPhone на листи уређаја са леве стране. Сада држите shift и стисните Restore дугме. Restore је пожељан и неће вам одузети од меморије iPhone-а.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Нађите Pwnage фолдер са десктопа и селектујте 2.2.1 firmware ipsw. Кликните Open дугме да наставите.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Трећи корак
Када је iTunes завршио са апдејтом iPhone-a на 2.2.1 firmware,стартујте QuickPwn.exe из Pwnage фолдера са десктопа.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Четврти корак
Проверите да ли је iPhone конектован за ваш компјутер и стисните плаву стрелицу да наставите.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Пети корак
Стисните Browse дугме да пронађете iPhone firmware.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Шести корак
Селектујте 2.2.1 firmware ipsw из Pwnage фолдера са десктопа па кликните Open дугме.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Седми корак
QuickPwn ће проверити да ли је ipsw валидан. Стисните плаву стрелицу да наставите.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Осми корак
Сада можете да селектујете шта желите од:: Add Cydia, Add Installer, Replace Boot Logos, и Unlock Phone. Селектујте оно што желитеi и стисните плаву стрелицу да наставите.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Девети корак
Сада треба да селектујете bootloader фајлове. Стисните Browse дугме и учитајте 3.9 bootloader из Pwnage фолдера са десктопа. Урадите то исто и за 4.6 bootloader фајл. Стисните плаву стрелицу да наставите.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Десети корак
QuickPwn ће вас сада питати да потврдите да ли је iPhone конектован преко USBa пре почетка процеса. Стисните плаву стрелицу да наставите.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Једанаести корак
QuickPwn ће сада аутоматски ставити ваш iPhone у recovery мод. Када је у recovery моду треба да урадите следеће: Држите Home дугме 5 секунди, Држите Home и Power дугме 10 секунди, па пустите Power дугме и наставите да држите Home дугме док iPhone не пређе у DFU мод.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Гледајте пажљиво и пратите даља упутства.
Дванаести корак
Када QuickPwn детектује iPhone да је у DFU моду почеће jailbreak процес.
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn

Тринаести корак
Када је завршен jailbreake, QuickPwn ће вас обавестити да је био успешан. Ваш iPhone ће покренути BootNeuter. Овај процес ће трајати око 5 минута. Молимо будите стрпљиви. Ваш iPhone ће се рестартовати и имаћете откључан и џеилбрејкован iPhone!
Како да урадите Unlock/Jailbreak за 2.x.x 2G iPhone користећи QuickPwn
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (904)
You must login or register to add a comment...
brandon
brandon - July 29, 2014 at 12:50pm
i need to unlock my mobile to all network
eduardo
eduardo - August 25, 2013 at 10:09pm
hola .. yo tengo un iphone 3g que me trade de usa. y quiero usarlo aqui en mexico con telcel . el problema que tengo es que cuando lo prendo me pide activarlo por medio de wifi o itune . cuando lo conecto por puerto usb a mi ordenador . me sale en el itunes que no tiene tarjeta sim .. no encuentro solucion a esto .. sabes el por que no me detecta la tarjeta sim !! o cual seria el problema .. gracias
Fawad Saeed
Fawad Saeed - January 7, 2011 at 2:45am
Quick pawn software is not downloading. Please upload the file again, Thanks
Big papa
Big papa - June 29, 2010 at 1:57am
hi my problem comes when i shift+restore my phone i use the provided restore file but it says iphone could not be restored and error occured(20) anybody know of any help to fix this?
Andreou
Andreou - April 5, 2010 at 6:44pm
hi. i have a problem after the update. I can't switch off my iphone...it stays blocked till the battery is empty...
hasnul
hasnul - December 8, 2009 at 6:31am
i did try all the steps and it turn accordingly but it didnt detect my sim card. plis help me? wut shud i do.
hasnul
hasnul - December 8, 2009 at 6:29am
i did try all the steps and it turn accordingly but it didnt detect my sim card. i say no service. plis help me? wut shud i do.
Vivek More
Vivek More - October 17, 2009 at 6:01am
Nice set of user friendly steps. Just would like to add from my end: 1. The link to QuickPwn.zip seems to be dead. Use http://mytopfiles.com/archives/file/QuickPwn-225-2/304244.htm instead. 2. Mention the step to rename iPhone1,1_2.2.1_5H11_Restore.zip to iPhone1,1_2.2.1_5H11_Restore.ipsw 3. Mention the need of Microsoft .Net Framework 2.0 to run the QuickPwn
nadim
nadim - October 24, 2009 at 12:23pm
Itune recognize my iphone, I can click on the LHS but I don't see the restore button that I need tp press along with the shift, IT seem like I am missing something here. please help
nadim
nadim - October 24, 2009 at 2:22pm
I have firmware 3.1 on my iphone. When I connect to itune, it goes directly to the screen where it says to activate it with At&T. I don't see the screen where I can click the restore button along with the shift key. How to get that screen? Please help
juan
juan - October 7, 2009 at 5:02pm
Thanks a lot.I finally could use back my iphone again.God bless you.
peter
peter - October 5, 2009 at 10:34pm
i keep getting that error 20 when i restore the iphone and try to run it with iphone1,1 2,2 may it be because i have the 3.0 currently
ata
ata - October 3, 2009 at 11:04am
thank u iClarified for these instructions, it works for me just perfect
damac
damac - September 29, 2009 at 2:20pm
n yeah i have iphone 2g with 2.2.1(5h_11) version n thanks in advance.
damac
damac - September 29, 2009 at 1:55pm
I unlock the phone succesfully And it detect the VOdafone India sim/network. Thank you. But there is a problem when I try to make a call it shows a message saying that I need to connect the phone to the itunes and only can make only emergency calls. through the emergency calls i can make phone calls but nothing more
anthony
anthony - September 26, 2009 at 8:29pm
thanks so much. Asante SAna, that swahili sayin THANKS
Jimmy
Jimmy - September 19, 2009 at 1:03pm
Hi I am from Singapore using M1 (if any1 knows). My 2G phone was jailbreaked n unlocked 2 yrs ago serial 7U746WBOWH8, using 1.1.3(4A93) modem firmware 04.02.13_G. I want to upgrade into 2.xx so i can use itunes application, but im not sure if this method will work for me??? any1 in singapore tried this before??? (email: antiphase214@yahoo.com.sg) thank you for reading
t4zz
t4zz - August 21, 2009 at 3:13pm
This is for iphone 2g. When i get to "Wait for yout iphone to connect in Recovery Mode" it seems to stop there, i dont get no response. But while that does not respond when i press the home button and the powere button it starts the process after but then when it comes to the jailbreaking stages just on the last second of the 30 seconds it say either i have done the wrong process or the usb is faulty! i have tried it in a few usb ports, but yet no luck! Help is needed please , urgently thanks!
Jared
Jared - August 13, 2009 at 12:32pm
THIS TUTORIAL WORKED GREAT! I UNLOCKED MY IPHONE 2G IN LESS THAN 20 MINUTES EVERY OTHER PRGRAM I HAVE USED HAS NOT BEEN SUCCESSFUL LIKE THIS ONE. THANK YOU SO MUCH. -JARED
Yana
Yana - July 21, 2009 at 12:48pm
I used this tutorial and it worked perfectly! I did not have other SIM card, so I just took out ATT SIM card when unlocking my phone. Thank you for the great tutorial! If I upgrade to OS 3.0 will it lock my phone back?
Johndoe01
Johndoe01 - July 21, 2009 at 1:41pm
There's a link on the top of the page if you want 3.0 firmware. The procedure to jailbreak and unlock is pretty much the same and also very easy to follow. Of course when you upgrade to any firmware, it will relock your iphone. The only problem I had is on both firmwares 2.1 and 3.0, the process doesn't work on Windows Vista, I got stuck in the middle of the process, I thought my iphone was bricked but when I switched to my other PC with Windows XP, it worked like a charm. I just had the new 3G iphone so I used this 2G iphone to practice, restored & unlocked, restored & unlocked so many times now that I can do it with my eyes closed! Just k/d!
TrickVistaToActXP
TrickVistaToActXP - July 23, 2009 at 2:59pm
If you get an error in a middle of unlock process on Vista, you can use this trick: Before starting the Unlock/Jailbreak process, click the .EXE (redsn0w.exe), select Properties and go to 'Compatibility' tab, check 'Run this program in compatibility mode for' and select XP SP2 or Vista. This essentially tells the executable to run as if it was running in XP. After that you follow the instructions as they are. Works like a charm! You don't need to hunt for an XP machine. Btw, this works with any executable. So, if you have an application that doesn't run on Vista, you can use this trick. And it is a welknown compatibility method- not an hack- which is fully tested by Microsoft.
Manoj
Manoj - July 11, 2009 at 6:19am
itunes 8.0.2 for 64 bit vista - http://notebook.driversdown.com/ViewDownloadUrl.asp?ID=139900&brNum=3&show=0 jailbreak - https://www.iclarified.com/entry/comments.php?page=3&enid=1880#commentsanchor unlock - https://www.iclarified.com/entry/index.php?enid=4253 steps: 1. the iphone restore did not work with shift + restore.. so i just restored (click restore without pressing shift), it downloaded 2.2.1 from apple website and restored it to factory settings. this was done to erase all previous used space and user settings etc. 2. after this, it was asking for activation, showing only emergency calls only etc.. i was kind of scared as nothing was accessible. 3. but i just continued with the jailbreak steps mentioned in https://www.iclarified.com/entry/comments.php?page=3&enid=1880#commentsanchor and it jailbroke the iphone with cydia installed. some relief here. 4. next was the most cumbersome (according to me) step of unlocking it for vodafone india sim. after googlinh reading many many docs and comments here and there, i realized that my modem firmware is at 2.30 where as yellowsn0w supports only 2.28, and the methods to downgrade were too complicated like using ssh and typing cmds etc.. 5. so i upgraded my modem firmware (not iphone OS) to 4.26 using "fuzzyband 3.1b1" . this can be installed by searching in cydia, it detects the current modem firmware and upgrades it from 2.30 to 4.26 6. next i used ultrasn0w to unlock the iphone for india vodafone sim using the instructions at https://www.iclarified.com/entry/index.php?enid=4253 . here make sure you turn 3g off.
jailbreaker
jailbreaker - July 3, 2009 at 8:20pm
when i download the firmware it pops up as a folder i am useing a mac do i have to be on windows?
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS