Como Hackear Tu iPhone 3GS Usando RedSn0w (Windows) [5.0]

POST

MAIL

Posted October 18, 2011 at 8:04am by iClarified

Estas son las instrucciones para liberar tu iPhone 3GS con version iOS 5.0 usando RedSn0w para Windows. El tutorial para Mac se encuentra en el siguiente link here.

Este proceso subira la baseband de tu iPhone acabando potencialmente con la oportunidad de desbloqueo. Por favor espera hasta que se haya posteado un tutorial sobre como actualizar al iOs 5.0 usando un ipsw modificado (custom ipsw) si necesitas desbloquear. La liberacion sera tethered para todos los dispositivos excepto para el iPhone 3GS con old bootroom, lo que significa que tendras que conectar tu aparato a la computadora cada vez que lo reinicies. Finalmente puede ser prudente guardar tus blobs SHSH, si no sabes como hacerlo sigue este tutorial this antes de continuar.

Si necesitas liberar una version anterior de firmware puedes encontrar el tutorial adecuado siguiento este link here.

Paso uno
Crea un folder en tu escritorio llamado Pwnage

Descarga RedSn0w 0.9.9b6 desde here y mandalo al folder Pwnage. Descarga tambien el firmware 5.0 desde aqui here y colocalo en el folder de Pwnage. (Nota: No necesitas descargar el firmware 5.0 si ya lo tienes instalado)

Extrae el archivo zip de RedSn0w dando doble click en el.

Como Hackear Tu iPhone 3GS Usando RedSn0w (Windows) [5.0]

Paso dos: (No necesitas este paso si ya tienes el firmware 5.0 instalado)
Conecta tu iphone a la computadora y abre iTunes.

Selecciona tu iPhone de la lista de aparatos a la izquierda. Ahora presiona la tecla Shift y da click en el boton de Restaurar. La restauracion es mejor porque no desperdiciara espacio en tu iPhone.

Abre el folder de Pwnage que tienes en tu escritorio y selecciona el firmware 5.0 ipsw. Eligelo y da click en continuar.

iTunes actualizara tu iPhone con el nuevo firmware.

Paso tres
Abre la aplicacion de redsn0w desde el folder que descomprimimos anteriormente.

**Para los usuarios de Windows 7 tal vez deberan tratar de correr el redsn0w en modo ejecutable como administrador en Vista compatibility. Puedes hacer esto dando click derecho en el archivo ejecutable y seleccionando las propiedades del menu.

Paso cuatro
Una vez abierto RedSn0w da click en el boton de liberar (Jailbreak)

Paso cinco
Conecta tu iPhone a la computadora, asegurate de que este APAGADO y da click en el boton de siguiente.

Paso seis
RedSn0w te guiara para poner tu iPhone en modo DFU. Puedes encontrar mas ayuda sobre modo DFU aqui .here

Presiona el boton Home y el de encendido por 10 segundos.

Suelta elboton de Power y continua presionando elboton de Home hasta que RedSn0w detecte el aparato.

Paso siete
Tu iPhone se reiniciara.

Paso ocho
RedSn0w preparara los datos de liberacion.

Paso nueve
Selecciona Cydia de la lista de opciones y da click en siguiente (Next).

Paso diez
Tu iPhone se reiniciara de nuevo y RedSn0w comenzara a descargar el nuevo RAM Disk y Kernel.

Paso once
Una vez completado el proceso RedSn0w te notificara que ha terminado. Cuando tu iPhone termine de reiniciarse (aproximadamente en 5 minutos)estara liberado con Cydia en el SpringBoard.

BOOT TETHERED
Una vez liberado, necesitaras volver a correr para tethered boot.

Paso uno
Desde el menu principal de RedSn0w da click en el boton de Extras.

Paso dos
Selecciona Solo iniciar (Just boot) desde el menu de Extras para solo iniciar tethered.

*Como siempre un enorme agradecimiento a iPhone Dev-Team y Geohot por su enorme esfuerzo y su gran contribucion a la comunidad iPhone.

Follow iClarified

Spencer Haley - April 9, 2013 at 1:03pm

Do I have to upgrade iPhone 3GS from 5.0 to 5.01 in order to get the untethered jailbreak? Thanks, SanDiegoSEO@SpencerHaley.com

Reply · Like

jagy - December 6, 2011 at 12:44am

error 3194 keeps coming when i try restoring to 5.0 on itunes

rivet - November 22, 2011 at 5:43pm

Does this works for ios 5.0.1?

Rob - November 11, 2011 at 7:03am

I have a 3gs on 4.0 custom ipsw, and on baseband 5.11.07, and unlocked, can I jailbreak update to 5.0.1 and keep my baseband and unlock?

sebastian142 - November 9, 2011 at 8:55am

Hi, after jailbreaked me iphone 3gs ios 5.0 all was work well. But after a few days the phone started to reset itself, this is so annoying that it happens several times a day. Please, any advice how to prevent it.

Tina - November 8, 2011 at 10:32pm

Hi, Does anyone knows if I can upgrade to iOS 5 if I have an iPhone 3GS running 4.3.5 on BB 5.12.02 (newboot)? Thanks in advance

Rajesh - November 3, 2011 at 12:11pm

Excellent

long - November 3, 2011 at 5:51am

dear all, I've just successfully updated my iphone 3gs to ios 5, but the issue is that " after installed ultrasnow, the sim still could not recognize". Has anyone ever faced up with this problem? please share me your experience. Thank in advance.

Victor - October 28, 2011 at 1:47pm

Will redsn0w autodetect my bootrom version?

Josh - October 27, 2011 at 2:43pm

Can anyone comment on the Battery Life and performance on a Old Bootrom 3GS? Thanks

sudnep - October 23, 2011 at 2:17am

hey guys i got a problem , i have 3gs with old bootrom, i used the custom firmware made by (sn0wbreeze-v2.8b8), using windows 7, then i used that custom firmware to shift restore using itunes. Then everything went well. Then device started i was using t-mobile, which it cannot activate then i used (redsn0w_win_0.9.9b6). but when i select the custom firmware made by snowbreeze it says, firmware not recognised. Then i used STOCK firmware and which was identified, and proceed the jailbreak with that. along with jailbreak i selected install ipad baseband and hactivate. But when the process finished. i still have to go through the activation process using authorised sim. Also i tried the methods to buypass the activation by dailing 112 in emergency call. if worked couple of times. then screen would go black and again i was out of phone. I also tried using three fingers to swipe in the emergency call windows while voice over is active. but the notification bar did not appear. The bottomline is i cannot get into my phone using t-mobile simcard. Any help is appreciated?

Tina - October 23, 2011 at 12:24am

Hi, Does anyone knows if I can upgrade to iOS 5 if I have and iPhone 3GS running 4.3.5 on BB 5.12.02 (new version)? Thanks in advance

long - October 22, 2011 at 9:42am

Hi everyone!!! I've already jailbreak my iphone 3gs, but it stuck on the apple boot logo. Please kindly help me to solve this problem!!!! Thank in advance!!

Adddddddddam - October 19, 2011 at 9:10am

works fanstasic, use sn0wbreeze to create ipsw to safe bb, then use redsn0w to boot into dfu (extra's then pwnmode) itunes to restore (itunes 10.5) shift and restore and then restore and then jailbreak and then boot teathard (booo lol!) working fine.

Tina - October 22, 2011 at 11:58pm

Which iPhone do you have? And which baseband and iOS you updated to 5? Thanks

Addddddddddddddddddddddam - October 28, 2011 at 10:49am

iPhone 3GS, Baseband 5.13.04.

Matt - October 19, 2011 at 5:36am

For those having any issues with the SIM Card, check out the following: http://forums.tipb.com/ios-5-forum/220740-jailbroken-3gs-upgraded-ios-5-now-no-service-no-sim.html Hope this helps!

vendo - October 18, 2011 at 8:35pm

I had a perfectly working unlocked and jailbroken iPhone 3GS, but of course I had to go ahead and try to get iOS5 on it. I didn't know I need to preserve my baseband while updating it, so now ultrasn0w will not unlock it for me and I'm left without a phone line. Is there any way to unlock an iPhone 3GS with 05.16.05 baseband? If not, is there any expected change that will allow me to do so?

Kev - October 18, 2011 at 9:16pm

The supported basebands for the iPhone 3G and 3GS are 04.26.08, 05.11.07, 05.12.01, 05.13.04, and 06.15.00. The baseband supported for the iPhone4 is 01.59.00. (from the Dev teams website, I dont think that there will be support for any other basebands just yet, especially not for the 3Gs, as we have been waiting for that for over a year. I just upgraded, jailbroke and unlocked my 3Gs and had to put in the ipad baseband, I just this minute did it, all seems to be working ok, but I cant vouch for the GPS at the moment until I try it tomorrow .. there have been reports that the ipad baseband messes up the gps

Kev - October 18, 2011 at 9:18pm

But an iPhone without GPS is better than an iPhone that doesnt make calls ...

Kev - October 18, 2011 at 9:20pm

Just checked GPS on maps and it pinpointed me exactly, so i will take that as GPS working for me.

Kev - October 18, 2011 at 6:50pm

Quick question 3Gs on 06.15.00 baseband, I already upgraded to iOS5 with sn0wbreeze and unlocked with ultrasnow, and although the phone is working fine, everynow and then the signal drops, and I loose wifi, then a few seconds later it comes back My question, if I jailbreak again with redsn0w, as I am on 06.15.00, will I still be able to unlock with Ultrasn0w Thanks in advance for your help Billy

Kev - October 18, 2011 at 9:22pm

Update. Just updates to iOS5 following the tutorial here, ipad baseband, all working fine, no calls dropping, and GPS seems to be working now.

planka - October 18, 2011 at 6:11pm

Could anyone please feedback on this is working or not? "The jailbreak is also tethered for all devices except the old bootrom iPhone 3GS.... " Does it get untethered? Any other problems? Is it slow on a 3gs?

long - October 18, 2011 at 3:42pm

Dear jailbreaker!! my phone is Iphone 3gs, and it is on the old bootrom. The question is that Can I still update my phone to ISO 5? and another problem is that I always encounter with error 3194 while I'm trying to restore 4.3.3 as well as 4.3.5. Can u solve this problem for me? In fact, I am very appreciate with Iphone dev-team that always provide the features for all iphone user! Hopefully, You'll solve and reply me asap. Thank in advance!!!

George - October 18, 2011 at 4:47pm

1. Add the following entries into your Windows hosts file: this is c:\windows\system32\drivers\etc\hosts 74.208.105.171 gs.apple.com 74.208.10.249 gs.apple.com 2. Download your ipsw file. (Mine was iPad 1 4.2.1) 3. Go to Tinyumbrella and download their Fixrecovery file. (2 are provided 4.2.1 and 4.3 use according to the OS you downloaded from IPSW step 2) 4. Run the device in DFU mode and run the Fixrecovery. 5. Open iTunes and place your device in restore mode (Hold Home buton and power together for abou 20 to 30 seconds) 6. Hold Shift key and click on Restore. Search for your ipsw file you downloaded and sit back and wait till it finishes. Youll experience 16xx errors use iREB and than Open iTunes and Hold Shift key and click on Restore search youtube for videos on how is done

Waqas - October 18, 2011 at 5:49pm

put your phone into recovery mode then connect with itunes and press restore it will update your phone to ios 5.

Long - October 19, 2011 at 4:50am

Thz you very much for your infomation, George!! Hopefully, I can update it successfully for this time!!! :)

Long - October 19, 2011 at 4:52am

Thz you Waqas!! :)

vendo - October 18, 2011 at 3:19pm

Folks it is not working, 3GS, ISO - iPhone2,1_5.0_9A334_Restore.ipsw , entered phone into DFU mode but redsnow is not working, telling me that he can`t download IPSW and I should check internet. help

vendo - October 18, 2011 at 3:28pm

after DFU program is processing and then " Error woth SHSH blobs!" " Couldn`t download required IPSW" I have alread iOS 5 restored

More Comments