Come Jailbrekkare un iPhone 4 con PwnageTool (Mac) [5.0.1]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted December 27, 2011 at 9:12pm by iClarified
Istruzioni per effettuare un Jailbreak untethered su iPhone 4 con iOS 5.0.1 usando PwnageTool per Mac. Pwnage tool crea un custom firmware che include i pacchetti di Cydia e che evita l'aggiornamento della Baseband
Passo 1 Create una cartella sul desktop chiamata "Pwnage" In essa dovete posizionare alcune cose. PwnageTool 5.0.1, Trovabile Qui.
Servirà anche il firmware 5.0.1 per iPhone, scaricabile Qui.
*Meglio non scaricare il firmware con Safari ma con Firefox perchè il primo lo estrae automaticamente*
Passo 2 Aprite PwnageTool appena scaricato e trasportate l'icona nella cartella "Pwnage".
Doppio click per aprire l'applicazione PwnageTool.
Cliccate OK se vi esce un messaggio di allerta.
Passo 3 Premete Expert Mode dalla barra in alto nel menù.
Passo 4 Seleziona il tuo dispositivo.Sul dispositivo apparirà un segno di spunta.Premete il pulsante a freccia di colore blu per continuare.
Step Five Si aprira la pagina "Browse for IPSW". Premete sul pusante Browse for IPSW....
Dalla finestra scegliete il vostro Firmware e premete il pulsante Open.
Passo 6 Si aprira un menù da cui scegliere tra le varie opzioni. Selezionate General e premete la freccia blu.
Le impostazioni General ti fanno scegliere le dimensioni della partizione. Spuntate Activate the phone se non siete con un dispositivo ufficiale.
NOTE*: Deselezionate Activate Se avete un dispositivo attivato ed ufficiale.
Le impostazione Cydia Ti fa creare un pacchetto se non vuoi istallarli dopo uno ad uno.
Selezionate Download packages. Dopo premete Refresh . E premete Refresh per vedere i pacchetti disponibili. Usate il doppio click per selezionare il pacchetto interessato in Select Packages .
Selezionate con la spunta e premete la freccia blu
Il menù Custom Packages Settings ti mostra i pacchetti per l' IPSW craccato .Se volete installare solo Cydia lasciate tutti così com'è. Premete la freccia.
Passo 7 Ora vedremo il processo di Pwnage! Premete il pulsante Build e premete la freccia Blu per cominciare.
Passo 8 Vi chiederà dove salvare l'IPSW Craccato voi selezionate la cartella "Pwnage".
Aspettate 10 minuti per completare il processo
Vi chiederà di inserire la password di amministratore.Inserite e premete OK.
Passo 9 Appena finito il processo ti sarà chiesto di collegare l'iphone. Appena sarà rilevato ti sarà spiegato come metterlo in modalità DFU .
Premete il tasto Power e l'Home contemporaneamente per 10 secondi.
Lasciate Power, quindi premere home per 10 secondi.
Appena messo in DFU l'iPhone il programma ti dirà di aprire iTunes
Passo 10 In iTunes, Premete il pulsante Alt/Option e contemporaneamente cliccate su "Ripristina".
Passo 11 Andate nella cartella Pwnage tramite la finestra che esce. Scegli l'IPSW creato da PwnageTool e premi il bottone Open .
Passo 12 Ora iTunes ripristinerà l'iPhone.Questo impegnerà circa 10 minuti. Appena fatto l'iPhone si riavvierà in un iPhone 5.0.1 Jailbrekkato!
***Ringraziamenti: Grazie all' iPhone Dev-Team, Chronic Dev-Team, I0nic, e Geohot per il loro duro lavoro che ha reso possibile il jailbreak!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Is this method updating baseband? And which version of baseband comes with 5.0.1 on iphone4? Now I'm unlocking phone with gevey and I wouldn't like to lose unlock possibility after updating.
People, I just followed this tutorial and I made sure to check for "activate my phone" in PwnageTool, and it DID NOT end up activated. For everybody depending on an activate option make sure this might put you in a tough spot without the original SIM card.
Hi!
The jailbreak didn't work for me. It says on iTunes that "This device isn't eligible for the requested build". I have a iPhone 4, it was on 4.3 i thing, I don't remember. But anywho.. Someone please help me.
It is possible that you run TinyUnmbrela and it add some lines to you /etc/hosts file.
Open it and removing lines that point to address like gs.apple.com
Ido
I have install iOS 5.0.1 on my iPhone 4. The installation complete successfully.
After that I've restore my data using iTunes but the process stuck in the middle due to insufficient disk space.
This cause my iPhone to go into recovery loop and restore did not work from that point on. After many failed attempts I finally found a solution:
Download the latest redsn0w (0.9.10b4 at the time I wrote this), inside the application click on Extra and select Recovery Fix. This will run only the part of the jailbreak that fix the recovery problem.
This fix all the error inside iTunes suck as error 1604, 1600, 21, 27 etc.
Ido.
Don't do this. iTunes go to the Internet and says: "This device is not eligible for upgrade".
iPhone 4 4.2.1
iTunes 10.5.2
TinyUmbrella helped me kicked device from recovery mode.
I was on an iPhone 4 with an unsupported carrier and on Gevey Supreme SIM. This worked like a charm.
And yes, activation doesn't work, so make sure you have any supported sim nearby (AT&T in my case)
You will lose all Cydia apps. iOS Apps will be back after a restore.
The only reason I did this was because being stuck on a tethered jailbreak WITH A Gevey SIM was painful!
!A few questions: 1.) Where can I buy one of those MicroSIM to SIM-card arotpads you used in this video when you removed your MicroSIM from the iPhone 3G?2.) in an earlier video, you showed us a SIM to MicroSIM cutter that? looked something like a stapler. Where can we get one of those?3.) What camera do you use to film your videos?Thanks!!
hey guys...any updates about the ultrasn0w???...has any one successfully updated to 5.0.1 preserving bb (i.e 1.59)...and then unlocking sucessfully thru ultrasn0w??
no, i'm at the same step as the guy below (SEW). i did a custom upgrade using pwnage, then ran redsnow to jailbreak & unteather and at the very end when u would think ios 5.0.1 would come up i get asked if i want to A)set up as new iphone, B)restore from icloud backup, C)restore from itunes backup
either way, i can't get to cydia to add ulstrasnow repo and i'm really nervous that i might have lost my old BB 01.59.00 which i was running on 4.3.3
anyone else get to this step and have this problem?
oh, also, the first time i ran pwnage i accidently selected "activate my iphone" in the general setting right before the build. i'm hoping that isn't the cause of these problems or worse, updating my baseband!
ok, if I choose to set up as a new phone I see Cydia. If I restore I don't. But now I have to reload all my apps and email and everything. Maybe this step should be added to the tutorial.
hey SEW, so if u choose "set up as new" it'll get u to cydia and ur able to add the ultrasnow repo? are u on BB 01.59.00 and did "set up as new" option afect ur BB at all? thx!
anyone else wanna chime in too that'd be great.
FOR EVERYONE WHO GOT STUCK WITHOUT A SLIDER!!! turn off completly and turn on and the lock kbreoayd will automaticly appear without a sliderTHIS HAPPENS BECAUSE THE SLIDER IS OFF ON DEFAULTand the? turn the slider on in ilock options (where to turn the slider on/off is in the video)RE-SPRING FOR THE NEW SETTINGS TO TAKE PLACE!!!THUMBS UP SO PPL CAN SEE!!
Anyone else having problems downloading pwnagetool. I download it but it downloads as a torrent. Then i use tomato to open it but nothing.
Thanks for the help
I have iphone 4 on 5.0.1 I was trying to jailbreak it and downloaded the correct ipsw file from your site (iPhone3,1_5.0.1_9A405_Restore.ipsw) but it gives me an error saying "wrong firmware bundle selected".
Appreciate any tips.
hi,
ip4 4.2.1 upgraded to 5.0.1 with custom 5.0.1 IPSW using PwnageTool_5.0.1.
JB ok, ip4 work..
But I'n not able to use some apps like Facebook, Xing ...
They crashes right after starting up ..
Any help ?
DEV TEAM PLEASE COULD YOU UPDATE CYDIA PACKAGES ULTRASN0W IS NOT WORKING
When I update the sources say this
Posix Operation time out
Failed to fetch
http://cydia.zodttd.com/repo/cydia/dists/stable/Release.gpg POSIX: Operation timed out
http://cydia.zodttd.com/repo/cydia/dists/stable/main/i18n/Traslation-en_US.bz2 POSIX: Operation timed out
http://cydia.zodttd.com/repo/cydia/dists/stable/main/binary-iphoneos-arm/Packages.gz POSIX: Operation timed out
Please please please I need my iPhone back update the sources thanks dev team
I just update my iPhone 4 without updating baseband but I can't install repo666.ultrasn0w.com says time out please I need help to solve the issue thanks
did any of you guys encounter an error 1600? i followed the instructions but i encounter that error.
also, i'm from outside the US, so i need to tick the activate radio button right? thanks.