Como efetuar o Jailbreak do seu iPhone 3GS usando o PwnageTool [Mac]

POST

MAIL

Posted February 15, 2010 at 12:03am by iClarified · 666591 views

Esse tutorial vai te mostrar como efetuar o jailbreak do seu iPhone 3GS usando o PwnageTool para o Mac. o PwnageTool agora suporta a ultima versão de firmware, 3.1.3.

Passo 1
Faça uma pasta chamada "Pwnage" no seu desktop. Nela, você precisara de algumas coisas. O PwnageTools 3.1.5 que pode ser encontrado aqui ou aqui

Você também vai precisar do firmware 3.1.3 para o iPhone.
3.1.3 (3GS): iPhone2,1_3.1.3_7E18_Restore.ipsw

Quando estiver baixando o arquivo IPSW, é melhor fazer com o firefox já que o safare na maioria das vezes executa a auto-extração do mesmo.

Como efetuar o Jailbreak do seu iPhone 3GS usando o PwnageTool [Mac]

Passo 2
De um clique duplo para montar o PwnageTool 3.1.5 então arraste o executavel para a pasta Pwnage.

Então, dentro da pasta Pwnage, clique duas vezes para executar o PwnageTool.

Cllique Ok na seguinte tela.

Passo 3
Clique em Expert Mode no menu superior.

Passo 4
Clique para selecionar seu iPhone. Uma marcação vai aparecer na imagem referente ao seu iPhone.

Passo 5
Clique na seta azul para continuar. Você será levado á pagina do "Browse for IPSW".
Em alguns casos ele pode encontrar automaticamente o IPSW. Se a ferramenta não o fizer automaticamente, encontre o arquivo IPSW que você precisa clicando em Browse for IPSW....

Clique para selecionar o IPSW desejado. Uma marca vai aparecer perto dele. Então, clique na seta azul para continuar.

Passo 6
Você será trazido a um menu com 7 opções. Clique em General e depois, clique no botão azul.

As configurações em General permitem qeu você decida o tamanho da partição. Selecione Activate the phone se você não estiver numa operadora oficial e depois, clique na seta azl.

Lembrete*: Desmarque Activate se você tiver um iPhone legitimamente ativado numa operadora oficial.

Lembrete:: Talvez você tenha que aumentar o tamanho da partição de root um pouco. Minha primeira tentativa falhou até que eu aumentasse o tamanho para aproximadamente 695 MB.

As configurações do Bootneuter estão indisponíveis para o iPhone 3G. Clique na seta azul.

As configurações do Cydia te permitem criar pacotes customizados para que você não precise instalá-los manualmente mais tarde.

Clique para selecionar a aba Download packages. Então, clique em Refresh para exibir todos os pacotes disponíveis. Clique 2x no pacote que você quer que ele será baixado e estará disponível na aba Select Packages.

Marque aqueles que desejar e clique na seta azul.

O menu Custom Packages Settings mostra uma lista de configurações de pacotes para o seu IPSW customizado. Por agora, deixe essas configurações como estão. Clique na seta azul para continuar.

A tela Custom Logos Settings lhe permite adicionar suas próprias imagens de boot. Clique em Browse para selecionar a sua tela de boot e recovery. Se desejar usar a do iClarified, elas podem ser encontradas aqui: Boot Logo, Recovery Logo

Lembre-se das regras para elas: formatos RGB ou Grayscale com canal Alpha e dimensões até 320x480...

Clique na seta azul para continuar.

Passo 7
Agora você esta pronto para iniciar o processo de pwnage. Clique em Build para selecionar e depois clique na seta azul para começar.

Passo 8
Você sera questionado para salvar seu IPSW customizado. Salve na pasta Pwnage que você criou no seu desktop.

Seu IPSW esta sendo construido agora. Aguarde aproximadamente 10 min.

Você será questionado pela senha do administrador do computador. Entre com a mesma e clique em OK.

Você será questionado se seu iphone já foi pwned antes. Se não tem certeza, clique em NO.

Passo 9
Se seu iphone ainda não estiver conectado, faça-o agora.

Depois de executar os processos iniciais, seu iPhone será colocado em modo de recuperação. Clique OK para fechar a mensagem lhe dizendo isso.

No iTunes também vai aparecer um pop-up lhe dizendo que detectou um iPhone em modo de recuperação.

Passo 10
No iTunes, segure a tecla Alt/Option e clique em Restaurar.

Passo 11
Navegue até a pasta Pwnage no seu desktop usando a tela de dialogo que aparecer. Selecione o IPSW que foi criado (iPhone2,1_3.1.3_7E18_Custom_Restore.ipsw) e clique em Open.

Passo 12
o iTunes agora vai restaurar o firmware no seu iPhone. Isso deve levar aproximadamente 10 minutos. Quando terminado, seu iphone será reiniciado no OS 3.1.3!

***Obrigado: Agradeço ao Dev-Team pelo trabalho duro deles em fazer esse jailbreak e tutorial possíveis.

Follow iClarified

nik14 - July 14, 2010 at 10:06pm

Any eta on a jailbreak for a 3GS with the new boot rom? Thanks

Reply · Like · Mark as Spam

AKJHS - July 14, 2010 at 2:07pm

I just have the same problem as the other people. iTunes says: An unknown Error occurred (1604) ... when trying to install 3.1.3. Also My phone won't get in recovery mode. Please answer asap. Thanks so much for your help.

ljz - September 18, 2010 at 10:53am

mine too... tried few times, still facing the same problem when tried to retore with the firmware.. error msg (1604) fyi: iphone 3gs - 3.1.3(7E18) - 05.12.01 is there any1 can help on this?? plsss..

ljz - September 18, 2010 at 10:56am

btw, my phone is now freezing on 'connect to itune' mode and it's being locked fr carrier country. thanks

AR3GS32GB - July 13, 2010 at 12:33pm

Dear All, I know that every single days you might be recieving buches of e-mails, but I will really appreciate if you can dedicate just few minutes and answer me about a very serios concern i have and it may be the same concern of others Iphone users that first (1) do not live in USA and as consequences can not open and USA itunes and secondly (2) tells you that the iphone obviously is locked. I have a 3GS iphone with firmware 3.1.3 and baseband 05.12.01, i live in the Netherlands Antilles and my account with Itues obviously is not an USA account as i am not resident of USA. I followed couple of times your instructions with Pwnage tool 3.1.5 (Mac) step by step and everything seems to be fine except when i reach the point that the Pwnage tool 3.1.5 after being created the custom firmware and ask me for a password and introduce the password now ask me also about if my Iphone has been pwnage and I answer (no), them the applicate should at that point to put the Iphone in recovery mode. the couple of times i have been running the applicate step by step the Pwnage does not put my Iphone in recovery mode and it is just freezing, no only that, i would like to know why when i created the custom firmware and try to restore through Itunes, Itunes is always giving an error message? do you may think that this is because Itunes after introduce the new policy that can be able to monitory from where are you log in to they can block any update or anything you would like to do in regards with their software? I just trying to get the logistic of this situation as i notice a lot of people in the block saying that its work, but why no with me? do you by any chance know about others that they may be getting the same situation i do? There is some extra or additional solution you can suggest me in order to active my iphone? i have it that way since almost four month and now that there is IS04 out there i would like to have my iphone working fine. I will really appreaciate your respond in this regards. Regards

Anthony Rijo - June 29, 2010 at 8:21am

I have an Iphone 3GS (3.1.3/05.12.1) and i have been trying like a crazy (step by step) to do as exactly you say in your tutorial to do to jailbraek this iphone; everything goes well till i try to install the custom firmware Pwgnage did, but the Itunes always give me an error message that i can not install this firmware; I really need your help (please); I need that in despite i know you all receive a bunch of e-mails that you please kindly help me and send me an e-mail stating why of this error or if there is something else i most do in order to jailbreak my iphone.... Your prompt respond to this inquiry will be highly appreciated. Regards

tatanka - June 23, 2010 at 1:30pm

This latest version of PwnageTool can jailbreak the original iPhone (Edge/2G), iPhone 3G, iPhone 3GS(older bootrom only with baseband 04.26.08) and iPod touch running on iPhone firmware 3.1.3. The custom .ipsw firmware files created with PwnageTool can update iPhone to firmware 3.1.3 without updating its baseband so that it can be unlocked to run on any carrier SIM. Please do not use this with New Bootrom on 3.1.3, it will screw your iphone. iClarified shoutd give this warning in the begining of the tutorial.

Mile - August 27, 2013 at 6:00am

Yes. If you sync'd your iPhone w/ iTunes and then jailbreak; the next time you run iTunes and cnceont the iPhone, iTunes will recognize a new phone as ask you if you want to restore from a prior-backed up version. Select that iTunes will then restore. After finished, check your sync settings (email, bookmarks, music, apps, videos, etc) and sync again. iTunes puts everything back like normal. Cydia installed apps are not backed up/restored. Use AptBackup from the Cydia repository prior to jb'ing and last iTunes backup. Then after the iTunes restore, open Cydia, download AptBackup, and press restore. Now all your jb'd apps are loaded. Just performed this procedure twice in the last 3 days .. great success. The only thing missing is the exact placement of app icons on the SB . and passwords for email accounts are missing (probably a good thing).

michael - June 23, 2010 at 2:43am

Hello! I has 3gs version 3.1.2 ,model firmware 05.11.07. I just upgrade version 3.1.3 using Pwnage Tool .After run version 3.1.3 the phone is stock in recovery model ( power on or logo on the screen ) when i used USB connect to iTune see the phone on recovery model .Please help ?Thank you !

Jorgeme - June 22, 2010 at 9:56pm

Thank you guys (iClarified / Dev-team). I had a 3GS on 3.1 and have done the jailbreak to 3.1.3 smoothly!!!

jorgeme - June 22, 2010 at 9:58pm

Just to add...My baseband was 5.11.07 and continues with that!!!

Hugo - June 11, 2010 at 2:30pm

Hi there. Please if i write something wrong please reply/comment!!! This tutorial is just for 3GS with 3.1.3 baseband equal or inferior xx.11.xx WILL NOT WORK IF YOU HAVE baseband 5.12.xx. - only for MAC OS; - For WINDOWS there is a "spirit" Jailbreak (google "3.1.3 spirit") and it will work on all baseband even xx.12.xx but your phone MUST NOT be locked in "Emergency Call". For those who have the same as me: 3GS 32GB 3.1.3 Baseband: 05.12.01 Serial: xxx30 <= old serial but the bootloader is the newest BootLoader: 6.4 <= new bootloader Model MC134 But locked in Emergency Call you have to wait! If not locked in Emergency Call USE ONLY the Spirit. For UNLOCK still have to wait 21st June for the release of OS4.0 and maybe then DevTeam release the so waited unlock! To check your iPhone info use f0recast.exe Hope this isuseful and with the correct information.

Vakas - June 14, 2010 at 7:16am

Thanks brother. Usefull information. Let's hope that iPhone Dev team release Jb and Unlock tools on 21st after the release of iOS4.

pankaj - June 2, 2010 at 4:02pm

hey does it work on iphone 3gs baseband 5.12.xx and i m not a mac user is there any softwre for windows??????

HUgo - June 11, 2010 at 2:13pm

This is only for mac. For Windows (i think there is not nothing). To your baseband it will NOT WORK. we are in the same "boat" and we have to wait a few more days. Maybe 21st June.

xavier - June 1, 2010 at 3:45am

Help....!!!! Stuck on step nine. just stays there, saying "connect device to USB" but doesnt go anywhere. For 1hrs.... How longs is going to take more!? Help....!!!!

Vakas - June 14, 2010 at 7:10am

I think you are on the latest firmware 3.1.3 and baseband XX.12.XX, if yes this is not for your device. Use Spirit to jailbreak your device but to use Spirit you must not have your phone stuck at connect to iTunes or emergency scree.

Bruno B - June 29, 2010 at 9:04am

i have exactly the same problem 3gs 32gb 3.1.3 05.12.01... stuck on step 9 what to do?

seb - May 31, 2010 at 1:55pm

guyzz whn will be the new version of redsnow will be released am having a 3gs 3.1.3 with latest bootloader in emergrncy mode. pls give me a reply thnxx for ur response

Vakas - June 14, 2010 at 7:12am

Hopefully on 21st June when the Apple will release iOS 4.

381 More Comments