Πως να κάνετε jailbreak στο iPhone 4 με PwnageTool (Mac) [4.1]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted October 20, 2010 at 12:14pm by iClarified
Αυτές είναι οι οδηγίες για το πώς να κάνετε jailbreak σε iPhone 4 με iOS 4.1 χρησιμοποιώντας το PwnageTool σε Mac.
Βήμα πρώτο Δημιουργήστε ένα φάκελο με όνομα "Pwnage" στο desktop. Μέσα σε αυτόν το φάκελο θα χρειαστεί να βάλουμε κάποια πράγματα. Το PwnageTool 4.1, μπορεί να βρεθεί εδώ here
Όταν κατεβάσετε το IPSW, καλύτερο θα ήταν να χρησιμοποιήσετε το Firefox γιατί το Safari συχνά το εξάγει!
Βήμα δεύτερο Κάντε διπλό κλικ στο PwnageTool στην συνέχεια σύρετε το PwnageTool εικονίδιο στον Pwnage φάκελο.
Έπειτα από τον φάκελο Pwnage κάντε διπλό κλικ και τρέξτε το PwnageTool.
Πατήστε Ok αν παρουσιαστεί κάποια προειδοποίηση.
Βήμα τρίτο Επιλέξτε Expert Mode από το πάνω μενού
Βήμα τέταρτο Επιλέξτε τη συσκευή σας. Ένα τικ θα εμφανιστεί στη συσκευή σας. Πατήστε το κουμπί με το μπλε βέλος για να συνεχίσετε.
Βήμα πέμπτο Θα εμφανιστεί στη συνέχεια η "Browse for IPSW" σελίδα. Πατήστε το Browse for IPSW... κουμπί.
Απο το παράθυρο που εμφανίστηκε επιλέξτε το firmware απο τον Pwnage φάκελο και πατήστε το Open κουμπί.
Βήμα έκτο Θα μεταφερθείτε μετά σε ένα μενού με πολλές επιλογές. Επιλέξτε General και πατήστε το κουμπί με το μπλε βέλος.
Οι General σας αφήνουν να επιλέξετε το μέγεθος του διαμερίσματος. Κάντε κλικ στο Activate the phone αν δεν είστε με επίσημο φορέα και στην συνέχεια πατήστε το κουμπί με το μπλε βέλος.
ΣΗΜΕΙΩΣΗ*: Μην επιλέξετε Activate αν το iPhone έχει ενεργοποιηθεί σε επίσημο φορέα.
Οι Cydia ρυθμίσεις σας αφήνουν να δημιουργήσετε ένα δικό σας πακέτο αποφεύγοντας να τις εγκαταστήσετε μετά μόνοι σας.
Επιλέξτε την Download packages καρτέλα. Πατήστε το Refresh για να εμφανίσει τα διαθέσιμα πακέτα. Κάνοντας διπλό κλικ στο πακέτο που θέλετε θα το μεταφορτώσετε και θα είναι διαθέσιμο στη Select Packages καρτέλα.
Επιλέξτε αυτά που θέλετε και στην συνέχεια πατήστε το κουμπί με το μπλε βέλος.
Το Custom Packages Settings μενού δείχνει τις ρυθμίσεις των πακέτων για το IPSW. Για τώρα μην αλλάξετε κάτι. Πατήστε το κουμπί με το μπλε βέλος.
Βήμα έβδομο Είστε έτοιμη να αρχίσετε την pwnage διαδικασία! Πατήστε το Build για να το επιλέξετε και στην συνέχεια πατήστε το κουμπί με το Blue βέλος για να ξεκινήσετε.
Βήμα όγδοο Θα σας ερωτηθεί να αποθηκεύσετε το .ipsw που φτιάξατε. Αποθηκεύστε στο Pwnage φάκελο που δημιουργήσατε στο Desktop.
Το IPSW δημιουργείτε. Παρακαλώ περιμένετε πάνω από 10 λεπτά.
Θα σας ζητηθεί να βάλετε τον κωδικό διαχειριστή. Εισάγεται τον κωδικό και πατήστε το OK κουμπί.
Βήμα ένατο Όταν το ipsw δημιουργηθεί θα σας ζητηθεί να συνδέσετε το iPhone σας στον υπολογιστή. Όταν το PwnageTool αναγνωρίσει τη συσκευή σας θα σας οδηγήσει στο πως να βάλετε το iPhone σας στην DFU λειτουργεία.
Πατήστε το power και το home κουμπί για 10 δευτερόλεπτα.
Αφήστε το power κουμπί και συνεχίστε να κρατάτε πατημένο το home κουμπί για 10 δευτερόλεπτα.
Όταν το iPhone μπει σε DFU λειτουργεία, το PwnageTool θα σας ζητήσει να ανοίξετε το iTunes.
Βήμα δέκατο Όταν είστε στο iTunes, κρατήστε το Alt/Option κουμπί και πατήστε Restore.
Βήμα εντέκατο Μεταφερθείτε στο Pwnage φάκελο στο desktop χρησιμοποιώντας το παράθυρο που άνοιξε. Επιλέξτε το IPSW που δημιουργήθηκε και πατήστε το Choose κουμπι.
Βήμα δωδέκατο Το iTunes θα αποκαταστήσει το firmware στο iPhone σας. Αυτά μπορεί να διαρκέσει πάνω από 10 λεπτά. Όταν τελειώσει το iPhone σας θα έχει jailbroken iOS 4.1!
***ΕΥΧΑΡΙΣΤΙΕΣ : Ευχαριστούμε τον Geohot και τις Dev-Teams κάνοντας το jailbreak και αυτόν τον οδηγό εφικτά.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
i updated my i4 to 4.3.1, after unlocking it with ultrasn0w, i can see 1 small singal bar, which i should cuz its not fixed yet. But i cant even see the name of my carrier, and hence can not make/recv calls.. and idea ? i am on 1.59.00
Hi everyone. I have a brand new IP4 locked to network and everything went well till the restore with iTunes10.1.1 when he start to verifiy the custom restore with apple. Stops there... any ideas?
Everything works fine and my iPhone is already jailbroke but the unlock does not work at all. I have an iPhone 4 Mod. MC318LL/A, Firmware Ver. 4.1, Baseband: 02.10.04-ICE_2_8.
Could be the baseband the reason of why the unlock does not work?
I did this tutorial but the iPhone stuck just a little bit before finish (the white bar on the iphone). I tried twice and the last one at this moment it takes 28 minutes. Any ideas or suggestions? thanks!
So I tried to upgrade my current JB Iphone 3g 3.1.3 to 4.1 using the Pwnage 4.1.
I got an Itunes error 1603 saying the restore was not good. Now im stuck at restore. Any suggestions as what to do now since I dont have the original 3.1.3 restore anymore?
thanks
Hi
I have a factory unlocked iphone 4 on 4.1 firmware and modem firmware 02.10.04 If I jailbreak using this method will my iphone 4 stay unlocked?
Thanks
Hi, I have bought an iphone 4 and it is on 4.1 firmware. The question here is if this tutorial works with my device?, because I read pwnage tool 4.1 had some troubles and that's why there was an update of pwnage, the 4.1.1 version which seems to work fine.
which option do you experts recommend for jailbreak? Limera1, green poison or pwnage tool???
Thank you very much in advance for the support.
can i build the fw first then do the restore later of does the procedure have to be continous? after building the fw, can i use the built fw for a 2nd iphone or do i have to build the fw all over again for the 2nd and different iphone 4? thanks.
I have a IP 4 and it is on 4.1 in the 2.14.00 firmware it is currently JB by the previous owner but he said that the IP was JB before. I am assuming it was with 4.0.1 or 4.0.2. I need an unlock to run on TMobile. Is there a way to bring it back to firmware 1.59.00 so that I may re-jailbreak it to 4.1 and keep my unlock with the firmware 1.59.00. Hope this makes sense.
Hi, every one sone one knows if I preserve the baseband 1.59 an iPhone and if I update with pwnage tool it will be able to unlock with ultrasn0w??? And if works FaceTime thanks for you replay
Hi all, a noob question. I have an iPhone 4 new out of the box - iOS 4.0.2, baseband 01.59.00-ICE_2_6. It is not yet activated with iTunes and I can't because it's UK Vodafone and I am on O2.
Will using PwnageTool with the "activate my phone" option selected and "update baseband " deselected mean that when complete I'll have an activate phone with iOS 4.1 and baseband Hi all, a noob question. I have an iPhone 4 new out of the box - iOS 4.0.2, baseband 01.59.00-ICE_2_6 that I can then unlock with Ultrasn0w?
Also what are the potential issues with not activating via apple?
And, is there any way of getting my settings and data from my iPhone 3G that is on 4.1 with the latest basband 05.14.02-6.2_M3S2 or have I screwed that by upgrading?
Thanks for any help :)
hey i know that this is not a fake website as i have successfully unlocked my iphone 2g this the help of this site.
if u talk about the tutorial for unlocking iphone 4 on OS 4.1 then it dint work out for me, while restoring with the new IPSW it showed an error 16XX. mine is a factory unlock iphone with OS 4.1 on it, so i tried to see if this work or not, dint work for me i tried it twice......
I JAILBREAK MANY TIMES THE IPHONE I SUGGEST THE UNLOCKERS TO WAIT TO 4.0 OR 4.0.1. I HAVE ISSUES ABOUT PWNAGE MANY PROBLES AT PAST WITH WIFI NOT WORKING, FACETIME , SMS SOMETIMES. USERS THA WANT UNLOCK THE IPHONE WAIT 4.2 FIRMWARE. THAT WANT ONLY JAILBREAK USE LIMERA1N
There was definitly a problem with facetime, after jailbreaking facetime was gone so i re-jailbroke with pwnage and it still was missing, so i restored using tinyumbrella and jailbroke with limera1n and facetime is back!
I did my JB with Limera1n, but Facetime is gone. I did not test MMS.
I was hoping Pwnage would fix it, but I am likely to wait more feedback from users if Facetime is really being fixed.
Did anyone tried the video in You Tube where says that reset all setting would do? I do not want to reset everything and do not get a fix.
Tnx!!!
I did not re-install the firmware or re-jailbroke. I just did the suggestion I´ve found on a video in YouTube: In Settings/ General, just "Reset All Settings". I have lost some configs, but got my Facetime back.
Now that we have Facetime in Macs, I did not want to stay out of it :)
HELP PLEASE I AM USING REDSNOW TO JAILBREAK 3G 4.1 WINDOW VERSION BUT WHEN I CLICK BROWSE IN REDSNOW IT DOES NOT WANT TO ACCEPT THE FIRM WARE EVEN THOUGH IT IS THE RIGT ONE
Did all procedures but cydia does not work, it keeps giving datbase error message "Database could not open lock file /var/lib/dpkg/lock - open (13 permission denied)". Tried acessing diectory of cydia through mac terminal or total command and no directory shows. Any tips on how to make cydia works?? No repositories or files were installed on cydia. Alrady tried to rinstall and add only open ssh when creating ipsw and rejailbreaking without sucess. Iphone 4 came with 4.1 already installed, firmware 01.59.00
Same thing happened to me. Iphone 4 JB 4.1. After finishing JB i went to cydia and same errors like you. Tried to connect using SSH and I get connection refused, I triple checked and and make sure that I selected install ssh and ssl. Have done it 3 times with no luck.
Worked for me on a iPhone 3G
But my final objective is to unlock it, does someone knows if it's already possible? (modem firmware 05.14.12)
Another question is, after having done all this, is it possible to downgrade to 3.0.3 in order to get the speed back?