Como realizar o jailbreak e desbloquear o iphone 3GS usando o RedSn0w (Windows)

POST

MAIL

Posted November 28, 2010 at 11:44pm by iClarified · 401771 views

Essas são instruções de como realizar o jailbreak no iphone com firmware 4.2.1 usando RedSn0w para Mac. Você poderá apenas realizar o jailbreak thetered nesse momento. Isto significa que você precisará da assistência do RedSn0W para realizar o boot no seu iphone com jailbreak.

Se você deseja realizar o jailbreak em uma versão menor de firmware, poderá encontrar o tutorial adequado. aqui.

Certifique-se de não atualizar para o iOS 4.2.1 se você precisa do desbloqueio, pois ele ainda não existe.

Primeiro passo
Crie uma pasta no seu desktop chamada Pwnage

Faça o download do RedSn0w aqui e coloque-o na pasta Pwnage. Também faça o download da última versão de firmware 4.2.1 no link abaixo e coloque-o na mesma pasta.

4.2.1 (4): iPhone3,1_4.2.1_8C148_Restore.ipsw

Extraia o aplicativo RedSn0w do arquivo zip RedSn0w clicando duas vezes nele.

Como realizar o jailbreak e desbloquear o iphone 3GS usando o RedSn0w (Windows)

Segundo passo
Conecte o seu iphone ao computador e abra o iTunes.

Selecione seu iphone da lista de dispositivos à esquerda. Agora aperte Shift e selecione o botão Restaurar. É preferível a restauração, pois não irá criar nenhum espaço inútil no iphone.

Navegue até a pasta Pwnage no seu desktop e selecione o ipsw do firmware 4.2.1.
Clique no botão Escolher e continue.

Terceiro passo
Quando o iTunes terminar a atualização do iphone para o firmware designado, abra a pasta Pwnage no seu desktop e o aplicativo redsn0w da pasta RedSn0w que extraiu anteriormente.

Quarto passo
Quando o RedSn0W abrir, selecione o botão Browse (procurar).

Quinto passo
Selecione o ipsw do firmware 4.2.1 colocado na pasta Pwnage do desktop e selecione Open (abrir).

Sexto passo
Quando o firmware tiver sido verificado, clique no botão Next (próximo) e continue.

Sétimo passo
O RedSn0w irá preparar os arquivos do jailbreak.

Oitavo passo
Dessa janela você poderá selecionar as opções de jailbreak que desejar.

Certifique-se que o Cydia está selecionado e clique no botão Next (próximo) para continuar.

Nono passo
Por favor, conecte o seu iphone ao computador, certifique-se que ele está DESLIGADO e clique no botão Next (próximo).

Décimo passo
O RedSn0w irá lhe guiar pelos passos para entrar em modo DFU. Você poderá encontrar mais ajuda com o modo DFU aqui

Segure os botões Home e Power por 10 segundos.

Solte o botão Power e continue pressionando o botão Home até que o RedSn0w detecte o dispositivo.

Décimo primeiro passo
O seu iphone agora irá realizar um reboot.

Décimo segundo passo
O RedSn0w começará o upload do novo disco RAM e do Kernel.

Décimo terceiro passo
Quando estiver completo, você será notificado que o RedSn0w acabou. Clique no botão Finish (finalizar). Quando o seu iphone terminar o reboot (cerca de 5 minutos), ele estará com jailbreak realizado e o Cydia no SpringBoard.

IMPORTANTE:
Se deseja usar o RedSn0w para ajudá-lo a fazer um novo boot no seu iphone com jailbreak, simplesmente selecione Just boot tethered right now (fazer um boot thetered agora) da janela de opções e clique em Next (próximo).

*Como de costume, um grande obrigado ao iPhone Dev-Team pelo seu trabalho árduo e contribuição para a comunidade do iPhone.

Follow iClarified

akirawi - February 26, 2011 at 5:46pm

The title of this tutorial is wrong! iClarified wake up! that's for Iphone 4 not 3GS and mac not windows!

Reply · Like · Mark as Spam

Gurvin - February 16, 2011 at 11:07am

iclarified standard is dropping... 1. The firmware file download link is for iphone 4 not 3gs 2. The tutorial says "for windows" yet the screenshots and instructions are for mac 3. In the screenshot too the iphone 4 firmware is shown instead of iphone 3gs. Waste of time

jorge - February 5, 2011 at 12:11pm

i cant download this link as an ipsw iPhone2,1_4.2.1_8C148a_Restore.ipsw it only does it as a zip file and wont show up when i try to restore my iphone. can anyone help

Thomas - February 4, 2011 at 8:34am

I got finally got this working. This is what I ended up doing. I ended up restoring in the official manner via itunes since I don't care what my baseband is, i don't need to unlock. The official restore will update BB to 05.15.04 on iphone 3gs so don't do it if you need to unlock. I then had to us the official IPSW I downloaded from apple for the choose your IPSW step of this tutorial. Don't us the IPSW from the link above if you did the official apple restore. This is found at %Userprofile%\Application Data\Apple Computer\iTunes\iPhone Software Updates it might be in different location for some people. Once i did that it was worked great. I for some reason could not downgrade must be a blob problem. Cydia says i have all blobs from 4.0 and greater stored and i uploaded before i restored. Not sure what's happening. i have seen at least 2 different addresses for saurik's server maybe one is incorrect.

Thomas - February 3, 2011 at 5:31pm

Hello. I have been at this for quite some time and have had zero luck. I get into DFU and when I hit waiting for reboot everything just stops. nothing get rebooted nothing happens at all. All i can do is reboot the thing normally. got redsn0w running in xp sp3 mode and as admin. Any suggestions would be great. thanks

Lime is so sour - February 1, 2011 at 7:10pm

I had limera1n installed back in 4.0.2 and when i upgraded my iphone 3Gs with redsn0w i keep getting stuck on exploiting limra1n part of install. The install would just stay there. I tried restoring my iphone but didnt help. Help plz :(

prmzin - January 29, 2011 at 4:30am

topic says jailbreak and unlock for iphone 3gs on windows but the tutuorial says for 4 on mac

jimmy - January 24, 2011 at 10:12pm

i jailbroke and then when trying to reboot after cydia is installed and installing roqy app all i have is the apple logo screen! please help! what do i do?? phone will not reboot normally!

Alex - January 18, 2011 at 11:43am

I did it, and the Jailbreak and Unlock worked out perfect. --- BUT! --- I'm having problems with Push notifications, I RECEIVE NOTIFICATIONS THAT DON'T BELONG TO ME, on Twitter, Whatsapp, Facebook, etc... Anyone is having the same problem?

Phil - January 18, 2011 at 9:31am

folks, it says above "If you are on 05.14 or 05.15 or higher you will need to do this to unlock." well, I am with a GS on software v4.0 with modem fw 4.26.08. would I need to upgrade to the v6.x modem firmware, too, to unlock? also, how to keep my baseband (if possible) at v4.26,08? I mean, when I restore to default firmware 4.2x using rightclick restore in itunes then it would upgrade the baseband also, wouldn't it?

Stephen - January 31, 2011 at 2:16pm

I would upgrade and leave your baseband the same look for the tutorial to upgrade with out screwing up baseband. My baseband is still 4.03 from back in the day

CASTLE - January 17, 2011 at 5:30am

when i restore my 3gs iphone firmware. in the end it shows error.(the iphone could not be restored an unknown error occured (1015), pls help me . i would be very greatful to you.

jj - January 10, 2011 at 3:13am

the download link for the redsn0w program doesn't seem to work...is there somewhere else i can download the program?

marvin - January 8, 2011 at 11:53am

I am stuck at "waiting for reboot" screen. Any work around ideas? thx

shom - January 8, 2011 at 4:51am

I got everything ok, But everytime my phone turns power off or goes dead (no battery) it will not get on again, unless I launch RedSn0w, plug the iPhone in and select just boot tethered to kick boot my iPhone 3gs. This is very annoying as it means I have to carry a computer with me.

iphone3gs old bootrom - January 6, 2011 at 11:47am

i'm using an iphone 3gs that has the old bootrom. after jailbreaking with redsnow, i found that it shows the white cydia icon. very strange.

capitanloria - January 8, 2011 at 12:18pm

Why nobody read the complete tutorial... man, there is one more step u need to go throw.... read the last 2 or 3 instruccions...u need to do the complete process one last time and you are set!!! the diference is that u use the window for unlock only.... and...done!!!!

julieb - January 5, 2011 at 7:09pm

Hi there. I have a 3Gs, 3.1.3., fw 05.12.01, it is jailbroken and unlocked. I would like to update to atleast 4.1 but not sure how. I did download the ispw file. Would I just need to go to iTunes and shift click the restore and go to the ispw file??? Thank you for your help in advance. :)

Nina - January 5, 2011 at 11:07pm

Yes Julieb, you can do that without upgraded your baseband so you can keep your baseband and do the unlock, don't use redsnow

julieb - January 6, 2011 at 12:54pm

Hi Nina, thanks for the response. I am a bit anal and a n00b at this. So I just want to make sure I got this right. I can go to iTunes click restore to 4.1 then after that I will have to take the steps to unlock again? Correct. Sorry if I sound dumb but I just want to make sure I do this correct. I had my iPhone for about 5 months just sitting there because I had the new bootrom and could not unlock it yet. Then Came across a chatroom that kept me updated but the chatroom is no longer there or their hiding.. :) So just want to double check.. thank you so much. Julie

166 More Comments