Ako na Jailbreak pre iPhone 4 pomocou RedSn0w (Windows) [4.3.2]

POST

MAIL

Posted May 6, 2011 at 12:59pm by iClarified

Toto je návod ako na jailbreak pre iPhone 4 na 4.3.2 firmware pomocou RedSn0w pre Windows. The Mac verzia tohto tutorialu je sem.

Nesmiete aktualizovať svoj iOS na verziu 4.3.2 ak potrebujete softwarové odblokovanie operátora. Odblokovanie (unlock) nie je zatiaľ dostupné!

Krok Jedna
Spravte zložku na ploche nazvanú Pwnage

Stiahnite RedSn0w z tejto adresy a uložte ho do Pwnage zložky. Rovnako stiahnite najnovší 4.3.2 firmware z linky dole a uložte ho do rovnakého adresára.

4.3.2 (4 GSM): iPhone3,1_4.3.2_8H7_Restore.ipsw

Rozbaľte RedSn0w zip súbor do rovnakej zložky.

Ako na Jailbreak pre iPhone 4 pomocou RedSn0w (Windows) [4.3.2]

Krok Dva
Pripojte svoj iPhone do počítača a spustite iTunes.

Vyberte svoj iPhone zo zoznamu zariadení naľavo. Teraz stlačte Shift klávesu a počas jej stlačenia kliknitena Restore tlačidlo. Dávame prednosť Restore, kedže nevytvára nevyužitý priestor na iPhone.

Otvorte Pwnage zložku na ploche a vyberte 4.3.2 firmware ipsw súbor. Kliknite na Choose tlačidlo.

Krok Tri
Keď iTunes dokončí aktualizáciu iPhonu na želaný firmware, otvorte Pwnage zložku na ploche a spustite redsn0w aplikáciu z redsn0w zložku ktorú sme predtým rozbalili. (Ak nastanú akékoľvek problémy so spustením aplikácie, pozrite ** tip na konci tohto návodu)

Krok Štyri
Keď sa RedSn0w spustí kliknite na Browse tlačidlo

Krok Päť
Vyberte 4.3.2 firmware ipsw uložený v Pwnage zložke na ploche a kliknite Open.

Krok Šesť
Po kontrole firmwaru kliknite na Next tlačidlo pre pokračovanie.

Krok Sedem
RedSn0w teraz pripraví jailbreak dáta.

Krok Osem
Z tohto okna môžete vybrať jailbreak vlastnosti podľa vašich preferencií.

Ujistite sa, že je vybratá Cydia a kliknite Next.

Krok Deväť
Odpojte iPhone z počítača, vypnite ho, a po vypnutí znovu pripojte do počítača. Ujistite sa, že je vypnutý a kliknite Next.

Krok Desať
RedSn0w vás bude navigovať ako sa dostať do DFU módu. Viac informácií o DFU móde nájdete sem

Podržte Home tlačidlo spolu s Power tlačidlom po dobu 10 sekúnd.

Uvoľnite Power tlačidlo a naďalej držte stlačené Home tlačidlo pokiaľ RedSn0w neuvidí zariadenie.

Krok Jedenásť
Váš iPhone sa teraz reštartne

Krok Dvanásť
RedSn0w potom začne posielať nový RAM Disk a Kernel.

Krok Trinásť
Keď dokončí, oznámi vám, že je RedSn0w dokončil prácu. Kliknite na Finish tlačidlo. Keď iPhone dokončí reštartovanie (okolo 5 minút) bude jailbraknutý s Cydiou na SpringBoard-e.

*Ako vždy veľká vďaka patrí iPhone Dev-Teamu a I0n1c za ich tažkú prácu a príspevky iPhone komunite.
**Windows 7 požívatelia by mali spustiť redsn0w aplikáciu v móde administrátora v kompatibility móde Windows Vista, ak narazia na akékoľvek problémy.

Follow iClarified

Mano - January 28, 2013 at 10:33am

I have this firmware in my iphone and i want to upgrade it only to 5.1 even though 6.1 is out. Is this even possible?

Reply · Like

Luis - August 25, 2011 at 11:43am

At the beginning of the article it says do not update firmware to 4.3.3. I checked my iphone 4 and I got firmware 4.3.3 already. My baseband version is 04.10.01 Does it change anything on the procedure?

NaZz - July 29, 2011 at 2:53am

i am getting 3194 error from itunes on step two, help!!!!

Tara - July 29, 2011 at 9:33am

That means itunes is not recognizing your iphone. Update your itunes to 10.2 version and then connect.

NaZz - July 29, 2011 at 12:28pm

I have the latest iTunes 10.4 version. help please!

Tara - July 29, 2011 at 12:34pm

Some iPhone 4 users have reported that they are facing iTunes Error 3194. This error usually occurs while restoring or updating the jailbroken iPod Touch, iPhone and iPad to the newer firmware.

Nina - July 2, 2011 at 5:38am

I downloaded windows 4.3.3 firmware but for some reason there is no iPhone3,1_4.3.3_8J2_Restore.IPSW file like you show in your text or utube explanation. There is a directory with full of files but none of them has the IPSW extention. The restore file is is quicktimepreferences link. So resn0w cannot find the IPSW file because it dosn't exist. Can you tell me how to find the iPhone3,1_4.3.3_8J2_Restore.IPSW file? Thanks very much for your help Best Nina

Colin_Thames - July 4, 2011 at 11:21am

I got caught out by this too. If you downloaded using Internet Explorer trying downloading again using Firefox or Chrome. IE always seems to screw up the file extensions so it doesn't appear right. I tink there's a workaround if you only have IE but using Firefox is by far the easiest solution.

tom - June 28, 2011 at 1:53pm

bag of shit link does`t works

Li To - June 27, 2011 at 10:01pm

Link not working.

Gazmend - June 26, 2011 at 8:22pm

the link for redsnow download it's not working :S:S some help ??

Jagacms - June 26, 2011 at 11:51am

Works like a charm... didnt face anyissues.. i upgraded by iphone 4 from 4.1 to 4.3.3... and gevey sim also working fine... thanks a lot iClarified :)

hish - June 25, 2011 at 12:04pm

the link not work !!!!

Rui - June 21, 2011 at 5:14am

I want to jailbreak my Iphone4 , firmware 4.1, to the latest 4.3.3. I'ts jailbreaked and full of apps from Cydia. What do i need to do not to loose all my apps with the firmware upgrade? Do i need to upgrade the firmware in iTunes and then Jailbreak it or it doesn't need to update first? Cheers from Portugal :)

jassem - June 16, 2011 at 12:29pm

the redsn0w link is brooking :(

Darren - June 9, 2011 at 2:58am

Just JB to 4.3.3, I haven't done a JB since 1st gen iphone, so i just have a quick quesstion. Everything is good so far, everything works and what not, but all my data is gone, music, contacts etc, is it safe to restore the data from a backup i have moments before i started the JB? It won't brick my phone will it?

GP - June 23, 2011 at 3:43pm

Yup it's cool to back up from your old backup. It will restore all of your data.

citoe - June 2, 2011 at 2:38am

i'm currently on 04.10.01.. can i jailbreak without having to upgrade my baseband? i'm worried i have to unlocked it after upgrade the baseband. anyone can advise?

Carlos Gouveia - May 20, 2011 at 3:48pm

After jailbreak I get no network signal....... the iphone it's turned in a ipod..... what do I have to do, anyone can help?

Broker - May 22, 2011 at 1:48pm

Having same problem low signal. Did u ever figure this out?

Paddy123 - May 23, 2011 at 3:15am

Even "Carrier Reset fix" do not work to solve the problem. Seems to be an Jailbreak error. Also tried it with redsnow rc16. Any answers ??? (IPhone 4 BB 04.10.01 / IOS 4.3.3)

Paddy123 - May 23, 2011 at 5:11am

Find the answer : 1. reboot in DFU mode 2. after reeboot activate mobile with itunes und wait for network signal (if you jailbreak with redsnow before activation than the problem with no network occurs) 3. Backup your files from itunes to phone 4. jailbreak

Carlos Gouveia - May 23, 2011 at 11:32am

I managed to solve it using this tut http://jaxov.com/2011/05/download-sam-to-activate-iphone-4-3gs-officially-on-ios-4-3-3/ good luck!

Carlos Gouveia - May 20, 2011 at 1:28pm

I get the error 3194. i have iphone 4 4.3.3 and it says iphone could not be updated error 3194

james - May 15, 2011 at 9:49am

the firmware file im downloading has no ipsw file attached where can i get my ipsw firmware?

GP - June 1, 2011 at 12:21pm

Download the file again and put .ipsw at the end of the file. It's trying to make it a different file.

matt - May 14, 2011 at 7:23am

Well tried to jail break with 4.3.2, all went well expect after rebooting the phone is stuck saying error mounting rootfs - read only, it says giving up after trying for 6000ms. Any one encountered this. I have already tried run as admin / compatibility modes. Need help from you guys !!!

Matt - May 14, 2011 at 4:16am

Hello all - My iphone is currently having 4.3.2. Can i use this method to jail break and upgrade it to 4.3.3 ? Thank you in advance !

kwanbis - May 13, 2011 at 4:28pm

"Step Two ... hold down Shift and click the Restore button... Navigate to the Pwnage folder on your desktop and select the 4.3.3 firmware ipsw. Click the Choose button to continue." That would update the BASEBAND, thus leaving the iPhone 4 unlockeable (for those who have an old baseband). How comes this is not mentioned?

matt - May 13, 2011 at 5:36am

An awesome site !

More Comments