March 2, 2024
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Como realizar o Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Posted May 6, 2011 at 3:06pm by iClarified
EnglishGermanIndonesianPortuguesePortuguese (Brazil)RussianSpanishThai
Estas são as instruções para fazer o jailbreak ao iPhone 3GS no iOS 4.3.2 utilizando o PwnageTool para Mac.

Primeiro passo
Criar uma pasta chamada "Pwnage" no Ambiente de Trabalho. Nessa pasta, serão necessárias uma par de coisas.O programa PwnageTool 4.3.2, encontrado em here.

Também é necessário o firmware 4.3.2 do iPhone.
4.3.2 (3GS): iPhone2,1_4.3.2_8H7_Restore.ipsw


É aconselhável utilizar o Firefox para baixar o ficheiro IPSW, uma vez que o Safari auto extraí os ficheiros!
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Segundo passo
Faça duplo clique no ficheiro PwnageTool que baixou para o montar e depois arratse o PwnageTool icon para a pasta Pwnage que criou anteriormente.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Desde a pasta Pwnage faça duplo clique na aplicação PwnageTool para a executar.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Clique Ok se aparecer algum aviso.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Terceiro passo
Clique na opção Expert Mode no topo da barra de menu
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Step Four
Click to select your device. A check-mark will appear over the image of the device. Click the blue arrow button to continue.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Quinto passo
Será conduzido até à página "Browse for IPSW". Clique no botão Browse for IPSW....
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Na janela aberta seleccione o seu firmware da pasta Pwnage e em seguida carregue no botão Open.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Sexto paso
em seguida aparecerá um menu com imensas opções. Seleccione General depois clique no botão com a seta azul.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

As configurações General permitem decidir o tamanho da partição. Seleccione Activate the phone se o iPhone tem necessidade de ser activado com um cartão de outro operador diferente do original e depois clique na seta azul.

NOTA*: Deseleccione a opção Activate se o seu iPhone pode ser activar legitimamente no seu operador..
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

O menu de configurações Cydia permite criar pacotes à escolha do utilizador para que não tenha que os instalar manualmente mais tarde.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Clique para seleccionar o separador Download packages. Depois clique no botão Refresh para que veja todos os pacotes disponíveis. Faça duplo clique no pacote que deseja baixar e fique disponível no separador Select Packages.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Seleccione os que desejar e depois clique na botão seta azul.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

O menu Custom Packages Settings mostra as configurações dos pacotes que estarão no IPSW customizado. Não altere essas configurações. Clique no botão da seta azul para continuar.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Sétimo passo
Está agora pronto para o processo pwnage! Clique no botão Build para o seleccionar e depois no botão da seta azul Blue para iniciar o processo.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Oitavo passo
Ser-lhe-á pedido que guarde o ficheiro .ipsw. Guarde-o na pasta Pwnage que criou no Ambiente de Trabalho.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

O ficheiro IPSW está a ser criado. espere cerca de 10 minutos.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Ser-lhe-á pedido que introduza a password de administrador password. Introduza-a e depois clique no botão OK.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Nono passo
Uma vez que o ficheiro ipsw tenha sido criado, ser-lhe-á pedido que conecte o iPhone ao computador. Uma vez que o equipamento seja detectado o programa PwnageTool guiar-lho-á nos passos para põr o iPhone no modo DFU.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Pressione e mantenha pressionado o botão power e o botão home por 10 segundos.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Depoisliberte o botão power e continue a pressionar o botão home por 10 segundos.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Quando o iPhone estiver no modo DFU, o programa PwnageTool pedirá que execute o iTunes.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Décimo passo
No iTunes, pressione a tecla Alt/Option e clique em Restore.
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Décimo-primeiro passo
Navegue até à pasta Pwnage no Ambiente de Trabalho utilizando a janela que aparece. Seleccione o ficheiro IPSW costumizado que foi criado e clique o botão Choose .
Como realizar o  Jailbreak ao iPhone 3GS Utilizando o PwnageTool (Mac) [4.3.2]

Décimo-segundo passo
O iTunes irá restaurar o firmware no iPhone. Este processo pode demorar até 10 minutos. Uma vez concluído o equipamento reiniciará já com o jailbroken iOS 4.3.2!


***AGRADECIMENTO: Obrigado ao iPhone Dev-Team e I0n1c pelo duro trabalho para tornar este jailbreak e tutorial possíveis!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
You must login or register to add a comment...
Mikey
Mikey - December 1, 2012 at 10:53am
Followed this three times and no go. "this device is not elligable for requested rebuild?
Brad
Brad - December 11, 2011 at 8:52pm
I have 3 iphones, all 3 are 3gs. 3gs FW 4.0 (NOT 4.0.1) bb 05.13.04 bl 6.4 model MC640 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w 3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC136 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w 3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC133 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w I have tried updating to 4.3.3 doing the following: pwnage tool to create custom ipsw. Enter DFU, hold option, click restore, select custom ipsw, Extracting, verifying with apple.... then I get this message... "this device isnt eligible for the requested build" I have tried editing the hosts file, to no avail. My question is this. I want to upgrade all 3 phones to the most recent FW that is UNTETHERED JB, and must be unlockable as I use T-mobile. What FW do I use, and what steps do I need to take. I have updated, JB, and unlocked phones before, but never had the message stated above. My eyes are crossed from reading and searching, so I really need some help on this one. Thank you in advance for you help. It is greatly appreciated. I use a MAC OS X 10.6.8 iTunes 10.5
chelsea
chelsea - November 19, 2011 at 12:43am
ive done this several times (with my iphone 3gs firmware 4.2.1) and each time itunes says firmware not compatible at the end. im so disappointed- ive been trying EVERYTHING... for WEEKS :( "i really dont wanna let it beat me like that wireless router did" -the office anyone?
seattlepunk
seattlepunk - November 26, 2011 at 12:24am
Getting the same error: The iPhone "iPhone" could not be restored because firmware file is not compatible. Tried this with both Activate checked and then not-checked.
Rose
Rose - June 25, 2011 at 9:54am
My phone wasn't working right, so I restored it to factory settings. Then I went through all these steps, and when I select the custom firmware created by Pwnage tool, iTunes says the firmware file is not compatible? I tried doing it again and unchecking "Activate" but the same thing happens. Help?
Tang
Tang - June 23, 2011 at 1:52pm
When I click on the links to download the PwnageTool_4.3.3, one says page not found, the other one downloaded a .torrent format document, which I couldn't open. I've used PwnageTool before it wasn't like this before. Something amiss with the links? Thanks.
anoop
anoop - May 26, 2011 at 5:18am
Hi, I did all the steps mentioned above , when i went to restore my phone it says that the " iphone cannot be restored as the firmware file is not compatible " i have already updated to the official 4.3.3 and it is stuck in the activate screen ! kindly help me out on this . i am not able to restore to the custom firmware and jailbreak it . help is much appreciated guys ! ty
Qiz
Qiz - May 25, 2011 at 6:48am
Hello, What size of the root partition should I use, minimum? Thanks in advance
Novaboyjp
Novaboyjp - May 25, 2011 at 2:53am
Hey, thanks! This worked brilliantly. Now running 4.3.3 on my 3Gs, kept old baseband of 5.13.04 Great work guys!!
Gorye
Gorye - May 23, 2011 at 3:22am
Once I get to the "Browse for IPSW" step, early on, and select the restore bundle, I get a "wrong bundle selected" message and can go no further. THanks for your help in advance.
Tomas
Tomas - May 16, 2011 at 4:07pm
I think Restoring bug is because cydia was in the folder when I did backup. Anyone has this problem please let me know. I
Tomas
Tomas - May 16, 2011 at 4:01pm
It would be interesting to know if anyone has problem on restoring backup for iPhone 3Gs. I rund Restore after restoring to new iOS and my applications does not get restored from iTunes with all my saved data back to the phone. I tried 2 times already this and its failing. I hate this updates let me tell you all the I lose some thing when I do this.
Alain
Alain - June 8, 2011 at 6:18am
Yes, I have an issue. Not yours. Apps are back but datas gone. I think I failed to enter in DFU mode. maybe BaseBand, I can't guess if I have and old bootrom or a new one on my 3GS 4.3.3 never Jailbroken before, please iClarified, add a warning in the Tuto. people wrote another way to enter in DFU mode. iPhone shut down. Iphone connected to the Mac 10 s middle button 20 s middle and right button 30 s middle button But itunes ask for a connection to Apple servers and prompt there are errors.
tintin
tintin - May 14, 2011 at 2:44am
everything worked out pretty fine while i JB my 3Gs using 4.3.3 on my mac. the only problem was i have no carrier, my modem firmware is 05.16.02. please help!
Jonathan
Jonathan - May 15, 2011 at 6:46am
Go to cydia follow this tutorial: https://iclarified.com/4253
thelionsword
thelionsword - May 16, 2011 at 7:05pm
bb 5.16.xx isn't supported. If you're up to 4.3.3, you're probably going to have to bite the bullet and upgrade your baseband to 06.15.00. I ran into the same problem, the jailbreak was great, but couldn't get a carrier connection because of the baseband problem. The other thing is that the 06.15.00 is actually an iPad not an iPhone backdoor. Many people have lost their GPS as a result. So don't just dive into it willy nilly. What you want to do is unlock the carrier base band: http://jaxov.com/2011/03/how-to-upgrade-iphone-3gs-05-16-01-05-16-02-to-ipad-baseband-06-15-00/ http://jaxov.com/2011/05/how-to-unlock-iphone-3gs-baseband-05-16-01-05-16-02-on-ios-4-3-3/ If you want to jailbreak and preserve your original baseband: http://jaxov.com/2011/05/how-to-unlock-iphone-4-3gs-on-ios-4-3-3-using-ultrasn0w-1-2-3/ (or, you've probably already done it *above*)
jo-b
jo-b - July 27, 2011 at 9:48am
I am on 4.2.1 with the 06.15.00 baseband. Actually I do not understand, if I could upgrade to 4.3.3 or 4.3.5 with a custom firmware, keeping my phone netlock free.
PHANTOM
PHANTOM - May 13, 2011 at 2:50pm
Hey. I really need help from experts. I bought an Iphone 4 which was used on AT&T and now I want to use it with another carrier. It has 4.1.0 software and 2.10.04 version. The question is: Is it possible to unlock mi phone jailbreaking it to 4.3.3 using the custom file of this tutorial. Thank you very much in advance.
spc6
spc6 - May 12, 2011 at 11:41am
Hi, I used this method (pwnagetool-I have ultrasn0w and redsn0w is not compatible, or that is what I have heard, and custom IPSW) and it worked great on my 3gs, had 3.1.3, bb 5.12, updated to 4.3.3. I did update everything before I started, tiny umbrella, itunes, and used firefox (I have a mac) to download all files. I thought I had correctly updated my ultrasn0w (you must reboot by sliding switch or it is not updated) before starting but apparently had not so I lost my unlock. When I was all done I had a "no service", "no network" or 1 bar showing and could not connect to anything. I turned on wifi and connected to Cydia, downloaded ultrasn0w and my phone is great (knock on wood)!. During the above process I did get stuck on a couple of things, first when I went to put the phone in DFU mode I did not have it off so my computer opened itunes, I panicked and closed it and had to try the DFU mode again but the tutorial was great and gave me the option. Once I successfully had it in DFU mode (it tells you) I was prompted back to step 5, this is the first time I have tried this so I wasn't sure what to do, felt slightly panicky (I have read horror stories about some peoples experiences) but opened itunes on my own and everything from there out was textbook. I did get concerned when it seemed to me itunes asked twice about restoring , but once done my bb is still 5.12 and I am loving having the apps back that had updated to ios4 and above. Thanks so much to all that work so hard to make this happen! Hope this might help someone else...
Jaybot
Jaybot - May 11, 2011 at 3:31pm
Trying to update jailbroken/ unlocked 4.2.1 to 4.3.3 and am getting a "iphone is not eligible for the requested build". Iphone 3gs, bootrom 05:13:04. I've tried 4 times with the same result. Anyone out there have insight into this?
Mohan
Mohan - May 12, 2011 at 1:55am
1. May be you haven't saved the SHSH and not running the Tinyumbrella ? 2. 5.13.04 can not run with 4.3.3 unless its custom firmware. 3. You should create custom firmware with pwnagetool4.3.3
Jaybot
Jaybot - May 12, 2011 at 2:27pm
Problem solved. I just redownloaded pwnage tool and 4.3.3 and I am now running 4.3.3 on t-mobile. Either my ios bundle was corrupted or I downloaded the wrong one like an idiot. Either way, hooray for ios 4.3.3! Now why didn't I think of that before?
Mohan
Mohan - May 9, 2011 at 4:07am
I have a 3gs with old bootrom (unlockable baseband 5.13) and tried to update to 4.3.3 custom firmware with Pwnagetool and resore it, but after it completes its getting to recovery mode (connect to itune) but with 4.3.2 custom firmware its working fine, With 4.3.3 its getting nowhere... Help me find if there is any issues with 4.3.3 custom upgrade ..?
Iulian
Iulian - May 9, 2011 at 11:44am
Have the same problem. Please help.
Mohan
Mohan - May 9, 2011 at 1:13pm
I could figure out the problem . So the tinyumbrella needs to be updated to latest version. Even though I had updated the tinyumbrella that did not save the 4.3.3 shsh , so it was not getting restored. Once that saved the 4.3.3 shsh and tried restoring the custom firmware, that worked.
F92pola
F92pola - May 3, 2011 at 5:39pm
Would be nice if every Jailbreak Tutorial as step 1 would have: "First do a backup in iTunes". I forgot to do just that, so after the (successful) jailbreak was finished - all gone. My bad, of course, but a little reminder wouldn't hurt.
jBoz
jBoz - May 3, 2011 at 3:57pm
At the very end when I click "restore" there isn't a browsing interface that opens to let me choose my custom ipsw, it just restores to factory defaults. I'm completely sure that I've done everything else correct. Why is this?
hellinwtc
hellinwtc - May 3, 2011 at 4:07pm
First you need to make sure you are in DFU mode and then open itune and there will be a pop up telling you that you are in DFU mode, if you don't have this pop up then you are not in DFU mode. After that if you are using Mac then you need to hold the Option key(for window hold Shift key) and click on restore so in that way you could be able to select you custom ipsw.
Raff
Raff - May 3, 2011 at 11:00am
Not worky for 3GS, the JB will works but no network connection!
jeibi
jeibi - May 1, 2011 at 10:42am
will this retain the baseband of the 3gs phone? thanks!
61 More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS