Como fazer o Jailbreak no iPhone 3GS usando PwnageTool (Mac) [4.3.2]

POST

MAIL

Posted May 6, 2011 at 3:06pm by iClarified · 263968 views

Instrução de como fazer o jailbreak no iPhone 3GS com iOS 4.3.2 usando PwnageTool para Mac.

Primeiro Passo
Crie uma pasta chamada "Pwnage" na sua área de trabalho. Feito isso você precisará fazer algumas outras coisas. Baixe o PwnageTool 4.3.2, aqui.

Você irá precisar do firmware na versão 4.3.2.
4.3.2 (3GS): iPhone2,1_4.3.2_8H7_Restore.ipsw

Quando for baixar o arquivo é melhor usar o Firefox ou Chrome do que o Safari, pois o navegador da Apple irá extrair o arquivo automaticamente.

Como fazer o Jailbreak no iPhone 3GS usando PwnageTool (Mac) [4.3.2]

Segundo Passo
Dê um duplo clique em PwnageTool para ter acesso ao arquivo do programa.

Copie o arquivo PwnageTool para a pasta que foi criada no primeiro passo (Pwnage). Feito isso e abra o arquivo.

Clique em Ok se concordar com o aviso.

Terceiro Passo
Clique em Expert Mode no menu localizado na parte superior.

Quarto Passo
Clique para seleccionar o dispositivo iphone 3gs. Irá aparecer uma marca azul no dispositivo escolhido. Clique na seta azul para continuar.

Quinto Passo
Clique no "Browse for IPSW" e selecione o arquivo "iPhone2,1_4.3.2_8H7_Restore.ipsw" salvo conforme instruido no Primeiro Passo.

Clique em Open para continuar.

Sexto Passo
Aparecerá um menu com várias opções. Selecione General e clique no ícone da seta azul

O menu "General" permite que você decida o tamanho da partição. Confira se a opção Activate the phone está marcada caso seu iphone não seja desbloqueado por alguma operadora e clique na seta azul.

Observação*: Desmarque a opção Activate the fone se o seu iPhone for bloqueado por alguma operadora.

A opção Cydia permite que você crie pacotes personalizados para que não seja necessario instala-los manualmente mais tarde.

Selecione Download packages. Clique em Refresh para aparecer todos os pacotes disponíveis. Dê um duplo clique nos pacotes que você quer instalar para fazer o download e eles ficarão disponíveis na aba Select Packages.

Verifique se selecionou todos os pacotes que gostaria e clique na seta azul.

O menu Custom Packages Settings exibe todos os pacotes que irá conter a sua IPSW. Clique na seta azul para continuar.

Sétimo Passo
Agora você está pronto para começar o processo de Jaibreak! Clique no Build para selecioná-lo e clique na seta Azul para começar.

Oitavo Passo
Você deverá salvar o seu arquivo .ipsw na pasta Pwnage criada na sua área de trabalho.

Sua IPSW está agora sendo montada. Espere por vota de 10 minutos.

Vai ser necessario autorizar o processo com a sua senha de administrador. Feito isso clique em OK.

Nono Passo
Uma vez que seu ipsw for finalizado você terá que conectar o iPhone no computador. Assim que detectar o dispositivo o PwnageTool vai orientar os passos a seguir para colocar o iPhone no modo DFU.

Pressione e segure o Botão de ligar o aparelho e o home por 10 segundos.

Solte o botão de ligar e continue segurando o botão home por 10 segundos.

Uma vez que o iPhone entrar no modo DFU, o PwnageTool solicitará que você inicie o Itunes

Décimo Passo
Uma vez no iTunes, Segure a tecla Alt/Option e clique em Restaurar.

Décimo Primeiro Passo
Navegue até a pasta Pwnage criada no "passo um" na sua área de trabalho e selecione o IPSW personalizado que foi criado, e clique no
Choose.

Décimo Segundo Passo
O iTunes irá restaurar o seu iphone com o firmware personalizado que foi criado. Esse proceso pode levar serca de 10 minutos. Uma vez que seu finalizado o processo pode reiniciar o seu Iphone que ele já estará com o jailbroken iOS 4.3.2!

***Agradecimento: Obrigado a iPhone Dev-Team e I0n1c pelo trabalho árduo para tornar o jailbreak e o tutorial possível!

Follow iClarified

Mikey - December 1, 2012 at 10:53am

Followed this three times and no go. "this device is not elligable for requested rebuild?

Reply · Like · Mark as Spam

Brad - December 11, 2011 at 8:52pm

I have 3 iphones, all 3 are 3gs. 3gs FW 4.0 (NOT 4.0.1) bb 05.13.04 bl 6.4 model MC640 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w 3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC136 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w 3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC133 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w I have tried updating to 4.3.3 doing the following: pwnage tool to create custom ipsw. Enter DFU, hold option, click restore, select custom ipsw, Extracting, verifying with apple.... then I get this message... "this device isnt eligible for the requested build" I have tried editing the hosts file, to no avail. My question is this. I want to upgrade all 3 phones to the most recent FW that is UNTETHERED JB, and must be unlockable as I use T-mobile. What FW do I use, and what steps do I need to take. I have updated, JB, and unlocked phones before, but never had the message stated above. My eyes are crossed from reading and searching, so I really need some help on this one. Thank you in advance for you help. It is greatly appreciated. I use a MAC OS X 10.6.8 iTunes 10.5

chelsea - November 19, 2011 at 12:43am

ive done this several times (with my iphone 3gs firmware 4.2.1) and each time itunes says firmware not compatible at the end. im so disappointed- ive been trying EVERYTHING... for WEEKS :( "i really dont wanna let it beat me like that wireless router did" -the office anyone?

seattlepunk - November 26, 2011 at 12:24am

Getting the same error: The iPhone "iPhone" could not be restored because firmware file is not compatible. Tried this with both Activate checked and then not-checked.

Rose - June 25, 2011 at 9:54am

My phone wasn't working right, so I restored it to factory settings. Then I went through all these steps, and when I select the custom firmware created by Pwnage tool, iTunes says the firmware file is not compatible? I tried doing it again and unchecking "Activate" but the same thing happens. Help?

Tang - June 23, 2011 at 1:52pm

When I click on the links to download the PwnageTool_4.3.3, one says page not found, the other one downloaded a .torrent format document, which I couldn't open. I've used PwnageTool before it wasn't like this before. Something amiss with the links? Thanks.

anoop - May 26, 2011 at 5:18am

Hi, I did all the steps mentioned above , when i went to restore my phone it says that the " iphone cannot be restored as the firmware file is not compatible " i have already updated to the official 4.3.3 and it is stuck in the activate screen ! kindly help me out on this . i am not able to restore to the custom firmware and jailbreak it . help is much appreciated guys ! ty

Qiz - May 25, 2011 at 6:48am

Hello, What size of the root partition should I use, minimum? Thanks in advance

Novaboyjp - May 25, 2011 at 2:53am

Hey, thanks! This worked brilliantly. Now running 4.3.3 on my 3Gs, kept old baseband of 5.13.04 Great work guys!!

Gorye - May 23, 2011 at 3:22am

Once I get to the "Browse for IPSW" step, early on, and select the restore bundle, I get a "wrong bundle selected" message and can go no further. THanks for your help in advance.

Tomas - May 16, 2011 at 4:07pm

I think Restoring bug is because cydia was in the folder when I did backup. Anyone has this problem please let me know. I

Tomas - May 16, 2011 at 4:01pm

It would be interesting to know if anyone has problem on restoring backup for iPhone 3Gs. I rund Restore after restoring to new iOS and my applications does not get restored from iTunes with all my saved data back to the phone. I tried 2 times already this and its failing. I hate this updates let me tell you all the I lose some thing when I do this.

Alain - June 8, 2011 at 6:18am

Yes, I have an issue. Not yours. Apps are back but datas gone. I think I failed to enter in DFU mode. maybe BaseBand, I can't guess if I have and old bootrom or a new one on my 3GS 4.3.3 never Jailbroken before, please iClarified, add a warning in the Tuto. people wrote another way to enter in DFU mode. iPhone shut down. Iphone connected to the Mac 10 s middle button 20 s middle and right button 30 s middle button But itunes ask for a connection to Apple servers and prompt there are errors.

tintin - May 14, 2011 at 2:44am

everything worked out pretty fine while i JB my 3Gs using 4.3.3 on my mac. the only problem was i have no carrier, my modem firmware is 05.16.02. please help!

Jonathan - May 15, 2011 at 6:46am

Go to cydia follow this tutorial: https://iclarified.com/4253

thelionsword - May 16, 2011 at 7:05pm

bb 5.16.xx isn't supported. If you're up to 4.3.3, you're probably going to have to bite the bullet and upgrade your baseband to 06.15.00. I ran into the same problem, the jailbreak was great, but couldn't get a carrier connection because of the baseband problem. The other thing is that the 06.15.00 is actually an iPad not an iPhone backdoor. Many people have lost their GPS as a result. So don't just dive into it willy nilly. What you want to do is unlock the carrier base band: http://jaxov.com/2011/03/how-to-upgrade-iphone-3gs-05-16-01-05-16-02-to-ipad-baseband-06-15-00/ http://jaxov.com/2011/05/how-to-unlock-iphone-3gs-baseband-05-16-01-05-16-02-on-ios-4-3-3/ If you want to jailbreak and preserve your original baseband: http://jaxov.com/2011/05/how-to-unlock-iphone-4-3gs-on-ios-4-3-3-using-ultrasn0w-1-2-3/ (or, you've probably already done it *above*)

jo-b - July 27, 2011 at 9:48am

I am on 4.2.1 with the 06.15.00 baseband. Actually I do not understand, if I could upgrade to 4.3.3 or 4.3.5 with a custom firmware, keeping my phone netlock free.

PHANTOM - May 13, 2011 at 2:50pm

Hey. I really need help from experts. I bought an Iphone 4 which was used on AT&T and now I want to use it with another carrier. It has 4.1.0 software and 2.10.04 version. The question is: Is it possible to unlock mi phone jailbreaking it to 4.3.3 using the custom file of this tutorial. Thank you very much in advance.

spc6 - May 12, 2011 at 11:41am

Hi, I used this method (pwnagetool-I have ultrasn0w and redsn0w is not compatible, or that is what I have heard, and custom IPSW) and it worked great on my 3gs, had 3.1.3, bb 5.12, updated to 4.3.3. I did update everything before I started, tiny umbrella, itunes, and used firefox (I have a mac) to download all files. I thought I had correctly updated my ultrasn0w (you must reboot by sliding switch or it is not updated) before starting but apparently had not so I lost my unlock. When I was all done I had a "no service", "no network" or 1 bar showing and could not connect to anything. I turned on wifi and connected to Cydia, downloaded ultrasn0w and my phone is great (knock on wood)!. During the above process I did get stuck on a couple of things, first when I went to put the phone in DFU mode I did not have it off so my computer opened itunes, I panicked and closed it and had to try the DFU mode again but the tutorial was great and gave me the option. Once I successfully had it in DFU mode (it tells you) I was prompted back to step 5, this is the first time I have tried this so I wasn't sure what to do, felt slightly panicky (I have read horror stories about some peoples experiences) but opened itunes on my own and everything from there out was textbook. I did get concerned when it seemed to me itunes asked twice about restoring , but once done my bb is still 5.12 and I am loving having the apps back that had updated to ios4 and above. Thanks so much to all that work so hard to make this happen! Hope this might help someone else...

Jaybot - May 11, 2011 at 3:31pm

Trying to update jailbroken/ unlocked 4.2.1 to 4.3.3 and am getting a "iphone is not eligible for the requested build". Iphone 3gs, bootrom 05:13:04. I've tried 4 times with the same result. Anyone out there have insight into this?

71 More Comments