Cara Jailbreak iPhone 3GS anda dengan Pwnage Tool (Mac) [4.3.1]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted May 6, 2011 at 3:06pm by iClarified
Ini adalah instruksi tentang cara jailbreak iPhone 3GS anda di iOS 4.3.1 dengan menggunakan PwnageTool untuk Mac
Langkah Pertama Buat folder bernama "Pwnage" di desktop. Di dalamnya, anda akan membutuhkan beberapa hal, PwnageTool 4.3 bisa didapatkan di here atau here.
Sewaktu mengunduh file IPSW, disarankan menggunakan firefox karena Safari sering mengekstrak secara otomatis file tsb.
Langkah Kedua Klik dua kali untuk membuka PwnageTool lalu drag ikon PwnageTool ke folder Pwnage.
Lalu dari folder itu klik dua kali untuk menjalankan aplikasi PwnageTool
Klik OK jika peringatan muncul.
Langkah Ketiga Klik untuk memilih Expert Mode dari menu atas
Langkah Keempat Klik untuk memilih device anda. Tanda centang akan muncul pada gambar device. Klik panah biru untuk melanjutkan
Langkah Kelima Anda akan sampai di halaman "Browse for IPSW". Klik tombol Browse for IPSW...
Dari jendela popup pilihlah firmware anda dari folder Pwnage lalu klik tombol Open.
Langkah Keenam Anda akan dibawa ke menu dengan beberapa pilihan. Klik dan pilih General lalu klik tombol panah biru
Pengaturan General membiarkan anda untuk menentukan sendiri ukuran partisi. Centang Activate the phone jika anda tidak menggunakan carrier resmi lalu klik panah biru
NOTE*: Kosongkan Activate Jika iPhone anda aktif pada carrier resmi.
Pengaturan Cydia mengizinkan anda membuat package custom sehingga anda tidak perlu meng-install mereka secara manual nantinya
Klik untuk memilih tab Download packages. Klik tombol Refresh untuk menampilkan semua package yg tersedia. Klik dua kali pada package yang anda mau dan unduh. Package ini akan tersedia di tab Select Packages.
Centang yang anda inginkan dan klik panah biru
Menu Custom Packages Settings menampilkan pengaturan package untuk custom IPSW anda. Biarkan seperti apa adanya lalu klik panah biru.
Langkah Ketujuh Sekarang anda siap untuk proses pwnage! Klik Build lalu klik panah biru untuk memulai.
Langkah Kedelapan Anda akan diminta untuk menyimpan file custom .ipsw anda. Simpan ke folder Pwnage yang anda buat tadi.
IPSW anda sedang diproses. Ini memakan waktu 10 menit.
Anda akan diminta memasukkan password admin Isi dan klik OK.
Langkah Kesembilan Saat IPSW anda selesai, ada akan diminta menghubungkan iPhone ke komputer anda. Saat terdeteksi, PwnageTool akan menuntun anda dengan langkah-langkah masuk ke DFU mode.
Tekan dan tahan tombol power selama 10 detik.
Lepas tombol power sambil terus menahan tombol home selama 10 detik.
Saat iPhone berhasil masuk DFU mode, PwnageTool akan mengingatkan untuk menjalankan iTunes.
Langkah Kesepuluh Di iTunes, tahan tombol Alt/Option dan klik Restore.
Langkah Kesebelas Arahkan ke folder Pwnage di desktop lewat window yang muncul. Pilih custom IPSW yang anda buat lalu pilih tombol Choose.
Langkah Keduabelas iTunes akan me-restore firmware pada iPhone. Ini berlangsung sekitar 10 menit. Jika sudah, iPhone anda akan reboot dan ter-jailbreak di iOS 4.3.1 !
***THANKS: Thank you to iPhone Dev-Team and I0n1c for their hard work in making this jailbreak and tutorial possible!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
I have 3 iphones, all 3 are 3gs.
3gs FW 4.0 (NOT 4.0.1) bb 05.13.04 bl 6.4 model MC640
bootrom 359.3.2 (unfortunately)
JB jailbreakme
UL ultrasn0w
3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC136
bootrom 359.3.2 (unfortunately)
JB jailbreakme
UL ultrasn0w
3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC133
bootrom 359.3.2 (unfortunately)
JB jailbreakme
UL ultrasn0w
I have tried updating to 4.3.3 doing the following:
pwnage tool to create custom ipsw. Enter DFU, hold option, click restore, select custom ipsw, Extracting, verifying with apple.... then I get this message... "this device isnt eligible for the requested build"
I have tried editing the hosts file, to no avail.
My question is this. I want to upgrade all 3 phones to the most recent FW that is UNTETHERED JB, and must be unlockable as I use T-mobile. What FW do I use, and what steps do I need to take. I have updated, JB, and unlocked phones before, but never had the message stated above.
My eyes are crossed from reading and searching, so I really need some help on this one.
Thank you in advance for you help. It is greatly appreciated.
I use a MAC OS X 10.6.8
iTunes 10.5
ive done this several times (with my iphone 3gs firmware 4.2.1) and each time itunes says firmware not compatible at the end. im so disappointed- ive been trying EVERYTHING... for WEEKS :(
"i really dont wanna let it beat me like that wireless router did" -the office anyone?
Getting the same error:
The iPhone "iPhone" could not be restored because firmware file is not compatible. Tried this with both Activate checked and then not-checked.
My phone wasn't working right, so I restored it to factory settings. Then I went through all these steps, and when I select the custom firmware created by Pwnage tool, iTunes says the firmware file is not compatible? I tried doing it again and unchecking "Activate" but the same thing happens. Help?
When I click on the links to download the PwnageTool_4.3.3, one says page not found, the other one downloaded a .torrent format document, which I couldn't open. I've used PwnageTool before it wasn't like this before. Something amiss with the links? Thanks.
Hi,
I did all the steps mentioned above , when i went to restore my phone it says that the " iphone cannot be restored as the firmware file is not compatible "
i have already updated to the official 4.3.3 and it is stuck in the activate screen ! kindly help me out on this . i am not able to restore to the custom firmware and jailbreak it . help is much appreciated guys ! ty
Once I get to the "Browse for IPSW" step, early on, and select the restore bundle, I get a "wrong bundle selected" message and can go no further. THanks for your help in advance.
It would be interesting to know if anyone has problem on restoring backup for iPhone 3Gs. I rund Restore after restoring to new iOS and my applications does not get restored from iTunes with all my saved data back to the phone.
I tried 2 times already this and its failing. I hate this updates let me tell you all the I lose some thing when I do this.
Yes, I have an issue. Not yours. Apps are back but datas gone. I think I failed to enter in DFU mode. maybe BaseBand, I can't guess if I have and old bootrom or a new one on my 3GS 4.3.3 never Jailbroken before, please iClarified, add a warning in the Tuto. people wrote another way to enter in DFU mode.
iPhone shut down.
Iphone connected to the Mac
10 s middle button
20 s middle and right button
30 s middle button
But itunes ask for a connection to Apple servers and prompt there are errors.
everything worked out pretty fine while i JB my 3Gs using 4.3.3 on my mac. the only problem was i have no carrier, my modem firmware is 05.16.02. please help!
bb 5.16.xx isn't supported. If you're up to 4.3.3, you're probably going to have to bite the bullet and upgrade your baseband to 06.15.00.
I ran into the same problem, the jailbreak was great, but couldn't get a carrier connection because of the baseband problem. The other thing is that the 06.15.00 is actually an iPad not an iPhone backdoor. Many people have lost their GPS as a result. So don't just dive into it willy nilly.
What you want to do is unlock the carrier base band:
http://jaxov.com/2011/03/how-to-upgrade-iphone-3gs-05-16-01-05-16-02-to-ipad-baseband-06-15-00/
http://jaxov.com/2011/05/how-to-unlock-iphone-3gs-baseband-05-16-01-05-16-02-on-ios-4-3-3/
If you want to jailbreak and preserve your original baseband:
http://jaxov.com/2011/05/how-to-unlock-iphone-4-3gs-on-ios-4-3-3-using-ultrasn0w-1-2-3/
(or, you've probably already done it *above*)
I am on 4.2.1 with the 06.15.00 baseband. Actually I do not understand, if I could upgrade to 4.3.3 or 4.3.5 with a custom firmware, keeping my phone netlock free.
Hey. I really need help from experts.
I bought an Iphone 4 which was used on AT&T and now I want to use it with another carrier.
It has 4.1.0 software and 2.10.04 version. The question is:
Is it possible to unlock mi phone jailbreaking it to 4.3.3 using the custom file of this tutorial.
Thank you very much in advance.
Hi,
I used this method (pwnagetool-I have ultrasn0w and redsn0w is not compatible, or that is what I have heard, and custom IPSW) and it worked great on my 3gs, had 3.1.3, bb 5.12, updated to 4.3.3. I did update everything before I started, tiny umbrella, itunes, and used firefox (I have a mac) to download all files. I thought I had correctly updated my ultrasn0w (you must reboot by sliding switch or it is not updated) before starting but apparently had not so I lost my unlock. When I was all done I had a "no service", "no network" or 1 bar showing and could not connect to anything. I turned on wifi and connected to Cydia, downloaded ultrasn0w and my phone is great (knock on wood)!. During the above process I did get stuck on a couple of things, first when I went to put the phone in DFU mode I did not have it off so my computer opened itunes, I panicked and closed it and had to try the DFU mode again but the tutorial was great and gave me the option. Once I successfully had it in DFU mode (it tells you) I was prompted back to step 5, this is the first time I have tried this so I wasn't sure what to do, felt slightly panicky (I have read horror stories about some peoples experiences) but opened itunes on my own and everything from there out was textbook. I did get concerned when it seemed to me itunes asked twice about restoring , but once done my bb is still 5.12 and I am loving having the apps back that had updated to ios4 and above. Thanks so much to all that work so hard to make this happen! Hope this might help someone else...
Trying to update jailbroken/ unlocked 4.2.1 to 4.3.3 and am getting a "iphone is not eligible for the requested build". Iphone 3gs, bootrom 05:13:04. I've tried 4 times with the same result.
Anyone out there have insight into this?
1. May be you haven't saved the SHSH and not running the Tinyumbrella ?
2. 5.13.04 can not run with 4.3.3 unless its custom firmware.
3. You should create custom firmware with pwnagetool4.3.3
Problem solved. I just redownloaded pwnage tool and 4.3.3 and I am now running 4.3.3 on t-mobile. Either my ios bundle was corrupted or I downloaded the wrong one like an idiot. Either way, hooray for ios 4.3.3!
Now why didn't I think of that before?
I have a 3gs with old bootrom (unlockable baseband 5.13) and tried to update to 4.3.3 custom firmware with Pwnagetool and resore it, but after it completes its getting to recovery mode (connect to itune) but with 4.3.2 custom firmware its working fine, With 4.3.3 its getting nowhere... Help me find if there is any issues with 4.3.3 custom upgrade ..?
I could figure out the problem . So the tinyumbrella needs to be updated to latest version. Even though I had updated the tinyumbrella that did not save the 4.3.3 shsh , so it was not getting restored. Once that saved the 4.3.3 shsh and tried restoring the custom firmware, that worked.
Would be nice if every Jailbreak Tutorial as step 1 would have: "First do a backup in iTunes". I forgot to do just that, so after the (successful) jailbreak was finished - all gone. My bad, of course, but a little reminder wouldn't hurt.
At the very end when I click "restore" there isn't a browsing interface that opens to let me choose my custom ipsw, it just restores to factory defaults. I'm completely sure that I've done everything else correct. Why is this?
First you need to make sure you are in DFU mode and then open itune and there will be a pop up telling you that you are in DFU mode, if you don't have this pop up then you are not in DFU mode. After that if you are using Mac then you need to hold the Option key(for window hold Shift key) and click on restore so in that way you could be able to select you custom ipsw.