October 6, 2024
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Posted January 20, 2011 at 2:07am by iClarified
DutchFrenchGermanItalianPortuguese (Brazil)SpanishSwedish
These are instructions on how jailbreak your second generation Apple TV using Seas0nPass.

**Currently, only a tethered jailbreak is possible on the 4.2.1 firmware***

Step One
Download the latest version of SeasonPass from here.


Step Two
Double click to extract the archive you downloaded. Then double click the extract application to launch it.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Three
Click OK to continue pass the tethered jailbreak warning.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Four
You will be asked to sign in as an Administrator. Enter your username and password then click the OK button.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Five
You will be asked to enable UI Scripting. Click the Enable button.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Six
Click the Create IPSW button from the main screen.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Seven
Seas0nPass will now download the latest Apple TV firmware file
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Eight
Seas0nPass will create a custom IPSW file for you.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Nine
Once your custom IPSW file has been created, Seas0nPass will ask you to connect the Apple TV to your computer via a micro-USB cable and use the remote to put it into DFU mode by holding MENU and PLAY/PAUSE for 7 seconds. The power cable should be unplugged during this process.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Ten
Once your Apple TV has been detected in DFU mode, Seas0nPass will upload some files, automatically launch iTunes, and beginning restoring to the new firmware.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1] How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1] How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]


BOOT TETHERED
To boot your Apple TV you will need to follow these instructions.

Step One
Launch Seas0nPass by double clicking its icon.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Two
Select Boot Tethered from the main menu.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Three
Connect the Apple TV to the computer via USB, plug it into the power outlet, and hold MENU and PLAY/PAUSE on the Apple TV remote for 7 seconds.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Four
Seas0nPass will detect the device in DFU mode and begin the boot process.
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1] How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]

Step Five
Once the tethered boot is complete you can remove the USB cable and connect the HDMI cable to begin using your jailbroken device!
How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1] How to Jailbreak Your Apple TV 2G Using Seas0nPass (Mac) [4.2.1]
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (24)
You must login or register to add a comment...
Danny G
Danny G - December 20, 2012 at 2:20am
to re-write what I wrote (in english this time) --- I'm not able to find the location of the custom IPSW when browsing with itunes's open "file locator" window, due to the fact that one of the folders is hidden (and iTune's lile locator can't seem to view hidden folders??) --- I am however able to find it with the regular finder in this location: ---- *homefolder*/Library/Application Support/Seas0nPass/Firmware ----- From here, I copy the file, paste it on my desktop, and then point itunes to my desktop in attempts to JB my pos atv2. ---- I'm running iOS 5.1.1 btw (52xx) firmware, itunes 11.0 and Seas0nPass 0.8.8.
Danny G
Danny G - December 20, 2012 at 2:15am
I'm not able to find the location of the file when browsing with itunes's open "finder" do to one of the folders being hidden (not just not appearing through iTunes when manually looking for the file) I am how ever able to find it with the regular finder in this location: *homefolder*/Library/Application Support/Seas0nPass/Firmware from here, I copy the file, paste it on my desktop, and then point itunes to my desktop in attempts to JB my pos atv2 I'm running iOS 5.1.1 btw (52xx) firmware itunes 11.0 and SP 0.8.8
apit
apit - February 5, 2011 at 10:49am
have performed every step as described. Screens report OK Done but ATV2 (4.1.1) does not seem to be JB'd. Cannot access it thru network IP. There is a screen coming up every time I perform the Seasonspass: "iTunes restore script failed selecting IPSW in Finder" but actions are done anyway
api
api - February 9, 2011 at 9:42am
The Restore Script seems to have a problem. That's why You have to perform the restore process Yourself. On a Mac hold ALT and click restore in iTunes, then choose the appropriate atv2 IPSW file in Your home directory on the home disc drive... and load it.
jjabbba
jjabbba - February 11, 2011 at 9:37am
I had the same problem. There is an easy fix. Just before SeasonPass failes it will open a finder window where the IPSW file it created is located. In iTunes, hold down the 'alt' button while clicking 'restore'. You will see a file selector popup. Just select the IPSW file created by seasonpass and let iTunes 'restore' using that file. After the restore you can proceed with the tethered booting step.
Nacho
Nacho - April 3, 2011 at 2:42pm
Hi, I would very much appreciate your help. Where does Seas0npass save the new IPSW file? I have to manually select it on iTunes to do de restore, but I don't know where it is. THANK YOU VERY MUCH!! Cheers!
Big
Big - February 1, 2011 at 9:15am
I successfully followed all the steps and saw exactly the screen which showed in the tutorial until the last step, then rebooted with the steps following the tutorials. Then disconnected the Apple TV and connected to my TV. Then, it stuck at the initial loading screen which is APPLE logo, it did not go any further than that. What should I do? Did I successfully jailbreak my device or not? Thank you for any helps.
El Norte
El Norte - February 1, 2011 at 9:53am
It's the tethered boot you need to do. If it hangs on the Apple logo, it means you need to boot tethered. If you already did that, run the jailbreak again.., start from the the top. The tethered boot didn't work for me either, the first time, after that.., like a charm. But, your AT2 is jailbroken now.., otherwise it would boot normally...
Big
Big - February 1, 2011 at 10:37am
I had done the "Boot Tethered" from the SeasonOnPass twice after I successfully jailbreak my device. I did receive the successful info said disconnected your device and connect to HDMI. Do you mean I have to start from the beginning of this tutorial and do it again? If I did, it should overrite whatever I had in the apple tv now, I did not get it. Well, just read a post. Could you explain in details how did you get passed it? Do you mean that I just jailbreak the device? then disconnect the device, do not run the "boot tethered" at all?
El Norte
El Norte - February 1, 2011 at 12:49pm
The whole process.., from the top. I did it step by step and it didn't work.., then I read somewhere else that I had to do it twice. So I did the the whole thing again from the top of the page (including the tethered boot, you have to that every time your AT2 looses power). Then it did work.
Big
Big - February 1, 2011 at 1:31pm
I did not connect the power source to the AT2 when I followed the instruction because I connect the AT2 to computer, AT2 get the power from the computer. I guess that I should connect to the wall power when I follow the instruction?
slander
slander - February 9, 2011 at 8:13am
This is exactly what is happening to me to,im stuck looking at the apple logo after following all the steps . Is that my apple tv 2 bricked or anyone know?
slander
slander - February 9, 2011 at 8:47am
i dont get asked to enable ui scripting at any point either??
big
big - February 9, 2011 at 4:37pm
I did successfully JB ATV2. ( slander, ignore the enable ui scripting message, that does not matter ). Just keep doing it and I tried more than 10 times. The problem is this JB is tethered JB, so apple tv has to connect to the power source all the time, and even when you did not use apple tv for more than 24 hours, it will auto put into the sleep mode or whatever, did not require any power at all. Then when you use it again, it stuck at the apple logo again. That is sucks. All of the setting was gone, JB was gone. I guess this is a working tutorial but it is not permanent fix for ATV2. Thoughts?
El Norte
El Norte - January 24, 2011 at 3:26am
I just can't seem to get my ATV in DFU mode. Anybody else got that problem.., or anybody has a solution for that? Up until the point where it says.., hook it up to USB en enter DFU mode.., it just doesn't see or register the ATV2.., and yes.., I do believe I do everything according to the instructions and I have a microusb (It is, however, a mini-to-micro-usb plug, would that matter?) Thanks...
Me
Me - January 28, 2011 at 5:26pm
plug in USB first and wait until the led starts flashing consistently - then plug in power cord and finally hold MENU and PLAY/PAUSE button for 7 secs then it should kick into DFU
El Norte
El Norte - January 29, 2011 at 4:35am
It was the mini-to-micro usb adapter which caused the problem. I got a dedicated usb-to-micro cable and it went without a hitch. Thanks for the reply. I did have to run through the process twice in order to boot tethered.., but that was ok. XBMC runs perfectly now...
tman
tman - January 21, 2011 at 2:53pm
Will this allow me to watch Hulu on ATV? If not, is this possible?
J. Bloggs
J. Bloggs - January 21, 2011 at 4:31am
When you say tethered boot does this mean when booting from standby or when booting from a complete power dowm ie power off at the mains???
Extrave
Extrave - January 20, 2011 at 5:33pm
Does any one know how to resolve the 1601 error every time I attempt a jailbreak on the Apple TV 2g I reacive this same error even after reinstalling itunes the error continues please help.
Jou
Jou - January 30, 2011 at 10:09am
I have exactly the same problem.
Brian
Brian - January 20, 2011 at 9:28am
Do any of you know of some good site to check out all the different features and apps you can add to the Apple TV after jailbreaking? I do jailbreak my phone but I haven't seen enough compelling reasons to do my Apple TV. I don't really need it to play different media types since I rip all of my own movies to work with the Apple TV. I need a more compelling reason, I'm just not sure what's out there in the Apple TV jailbreak world.
Twitter
Twitter - January 20, 2011 at 12:53pm
Hope this helps. Follow this twitter blog: http://mobile.twitter.com/appletvhacks#14299987340959744
xbmc's mom
xbmc's mom - January 23, 2011 at 7:00pm
xbmc
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Ventura
Where to Download iPod touch Firmware Files From
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS