December 11, 2024

Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Posted October 19, 2009 at 5:36pm by iClarified
EnglishFrenchSpanish
A continuación tienes las instrucciones para parchear el CommCenter de tu iPhone 3G, 3GS con firmware 3.2.1 para activar el tethering de internet (compartir la conexión de tu iPhone).

Aviso: Estas instrucciones están destinadas a usuarios avanzados y no están, por tanto, recomendadas para usuarios principiantes.

Requisitos: debes contar con un iPhone con jailbreak y firmware 3.1.1 También necesitas tener instalado SSH y saber, además, la Dirección IP de tu iPhone en a red local. Por último, también necesitarás Fugu u otro cliente SFTP instalado.


Paso 1
Crea en tu escritorio una carpeta llamada Pwnage y coloca en ella el parche apropiado para tu dispositivo:

[3G] [3GS]
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Paso 2
Haz doble clic en el zip que has descargado para extraer su contenido. Obtendrás una carpeta llamada CommCenter_3g_312 o CommCenter _3gs_312, según la versión que hayas descargado.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Paso 3
Ve a tu carpeta de aplicaciones en tu Mac y ejecuta Fugu.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Paso 4
Introduce la IP de tu iPhone's IP en el campo Connect To: y usa root como nombre de usuario. Pincha en el botón Connect para continuar. Este paso únicamente funcionará si tienes instado SSH en tu iPhone.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Cuando se te solicite, introduce alpine como contraseña y luego pincha en el botón the Authenticate.

Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Paso 5
Una vez que Fugu abre el contenido del directorio de tu iPhone usa el panel de la izquierda para navegar a la carpeta Pwnage de tu escritorio.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Luego pincha el botón Go To.. en la barra de herramientas.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

En el campo Go To.. copia y pega la siguiente dirección:
/System/Library/PrivateFrameworks/CoreTelephony.framework/Support/ into

Seleccuiba Remotely, y pincha en el botón Go.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Arrastra el archivo CommCenter desde el panel derecho al izquierdo para copiar el archivo a tu ordenador.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Paso 6
Ejecuta la aplicación Terminal haciendo doble clic en ella en la carpeta Applicaciones:Utilidades de tu ordenador.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Escribe cd Desktop/Pwnage y pulsa enter en tu teclado para ir a tu carpeta Pwnage.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Escribe bspatch CommCenter CommCenter-patched CommCenter_3g_312/CommCenter3g.patch y pulsa enter para crear la versión parcehada de CommCenter.

IMPORTANTE: Recuerda cambiar 3g a 3gs si tienes el iPhone 3GS ej. bspatch CommCenter CommCenter-patched CommCenter_3gs_312/CommCenter.patch
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Ahora hay que confirmar que el archivo se ha parcheado correctamente. Escribe el siguiente comando en el Terminal:
/usr/bin/openssl sha1 CommCenter-patched.

Comprueba tu SHA1 con los correctos para asegurarte que el parcheado se ha realizado correctamente. En caso contrario NO continúes.

1b19712035f33654cf72838ebe1a2033931b56b2 # 3GS

063165c3fa3e21d30eb4b486fab924ba3ef0ea5e # 3G

Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Paso 7
Regresa a Fugu y haz Control-Clic en CommCenter en el panel derecho. Seleciona Rename del menú contextual y cambia el nombre al archivo a CommCenter-backup.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

De ser necesario, pincha en el botón Reload de la barra de herramientas y arrastra el archivo CommCenter-patched del panel izquierdo al derecho.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Control-Clic el archivo CommCenter-patched del panel derecho y selecciona Get Info del menú contextual. En la parte inferior de la ventana de información cambia los permisos a 0755 y pincha en el botón Apply.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2 Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Control-Clic el archivo CommCenter-patched en el panel derecho y selecciona Rename desde el menú contextual. Cambia el nombre del archivo a CommCenter.
Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Cómo activar el Tethering en tu iPhone 3G, 3GS 3.1.2

Paso 8
Ya puedes reiniciar tu iPhone y usar el Tethering de internet. Quizás debas usar este tutorial para obtener la configuración adecuada para tu compañía.

***GRACIAS: No estoy muy seguro de quien fue el primero en encontrar este parche, pero ¡gracias a MuscleNerd por anunciarlo!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (40)
You must login or register to add a comment...
haymon
haymon - May 26, 2010 at 7:58pm
works with 3.1.3 firmware???
Ruben D Mercado
Ruben D Mercado - April 21, 2010 at 1:32pm
Anyone try this on a 3.1.3?
Mark
Mark - May 3, 2010 at 3:36am
No, I can't boot up...
fink
fink - May 6, 2010 at 12:40pm
I'd like to know the same: will it work on 3.1.3, 3GS, spirit jb?
pohaha
pohaha - March 26, 2010 at 12:02pm
I followed these instructions carefully and I was in a neverending reboot. I ssh'd back in and erased what I did. I've been able to use my iphone, but have somehow sms messaging no longer works. When I click on messaging the screen where there should be a list of my old messages shows up blank and launches a new message for me to send then it closes. I have not been able to get or send my sms messages since. Please someone have a fix to this or tell me which command to use to get my sms messaging back to normal. I've restored like 5 times, I tried ultrasn0w and blacksn0w to unlock. I even downgraded back to 3.1 without any luck. iphone 3g 8gb jb: pwnage ul:blacksn0w Thanks in advance!
Jon2168
Jon2168 - January 31, 2010 at 11:46pm
Sam, thanks for your post. The link worked well for AT&T.
Marc
Marc - January 13, 2010 at 3:23am
iphone crash after following these tutorials to enable tethering!! I am in big trouble with my iphone 3GS, jailbroken with Blackra1n, firmware 3.1.2 and baseband 05.11.07. I am using the last itunes (9.0.2) My goal was to to enable tethering on my iphone. I first installed openSSH by following this tutorial: https://iclarified.com/5637. Then I installed Fugu with this tutorial : https://iclarified.com/2096. At this time I reboot the iphone and everything was fine. Then I finally followed this tutorial to enable tethering : https://iclarified.com/5634 I think I did not reboot at this time. To install my carrier settings I used this website: bluebanana.fr I installed this carrier settings « Bouygues Telecom France v6.3 ». After all this I restarted my iphone and it never restart again ! It always freeze on the apple logo and restart as itself. Its a neverending reboot loop. I try the recovering and hard recovering with itunes. Itunes can see the iphone but when it start the recover it freeze with an empty status bar on the iphone. Then itunes stop and show « waiting for iphone error 9 ». What can I do to save my iphone ! Please help
Pohaha
Pohaha - March 23, 2010 at 2:17am
Ugh! I should've checked here before doing this! Mine is in a neverending reboot as well. Anyone know a fix to this?
Sam
Sam - January 10, 2010 at 9:07pm
Check this website before you do that: http://www.mobilecrunch.com/2009/11/03/tutorial-how-to-tether-on-an-iphone-3g-or-3gs-running-os-3-1-2/. Enjoy!
firecracker
firecracker - January 10, 2010 at 7:19pm
Thanks for clarifying tutorials. This tethering thing works like a charm.
IceCoolDesi
IceCoolDesi - December 16, 2009 at 1:44pm
Since the is no Fugu fo Windows users, use NetDragon iPhone PC Suite to do file transfer, permission change and renaming of files. For patching and SHA1 compare, I used Terminal application on OS X.
Brent
Brent - December 9, 2009 at 7:30am
Too cool - all works fine (posting this using tethering now). Thanks for another easy to follow and handy tutorial!
Sam
Sam - November 16, 2009 at 1:38am
This is too much work. I just install RockID app, then open RockID to download 3G tethering. Then, go setting--> general--> network. Tethering ready
Roberto
Roberto - October 25, 2009 at 6:54am
Thanks. Most helpful. Now to tether to jolicloud(Ubuntu) somehow...
Noman
Noman - October 24, 2009 at 6:13pm
Works perfectly. The instructions aren't the clearest and I'm no expert but this has just worked fine on 3gs 3.1.2 This tutorial made the internet tethering option return in the network settings page, I then reinstalled the 02 profile that I had previously been using and turning it on. I did try using PDAnet from Cydia but its not great, the connection was dropping out and the speeds were not what I would get from standard tethering. Thank you to whoever found/created the tutorial. Tom
UltraSoul
UltraSoul - October 22, 2009 at 9:16pm
Did it. does not change anything. I mean everything looks okay and the phone still works etc, but no tethering.
briane
briane - October 22, 2009 at 2:04pm
Does allthis mean that you willonly be tethered by wi-fi using the networkIP address installed and if one wanted to tether away fromthe networkone would have to find a wi-fi network and get its IP address and reload
Brian
Brian - October 21, 2009 at 1:48pm
I did all of the above, and the installed the profile at Benm.at. The tethering works, but then it stops my visual voice mail from working.... Anyway to get both of them working at the same time?
Jon
Jon - October 21, 2009 at 1:02pm
I finally got the commcenter hack installed, and did all the other steps in this tutorial. Total Waste of Time! the musclenerd Tethering does not work on a PowerPC Mac. PDANet does work, and I recommend it. Very easy, MUCH easier than this tutorial for the musclenerd hack, and MUCH easier than enabling the tethering toggle with BenM's files, which do NOT actually enable tethering at all.. I dont know why people dont just use PDANet. It was free too.
bndmod
bndmod - October 20, 2009 at 5:11pm
Hey, what happend if SHA1isn't correct? We must stop the procces, but it's any way to enable tethering?
Johnny2006
Johnny2006 - October 20, 2009 at 12:20pm
anyway to make this work on windowssss
briane
briane - October 21, 2009 at 10:58am
can anyone tell me who/what /where iphone tunnel and winscp Iobviously come under DUH
Metal Geek
Metal Geek - October 21, 2009 at 12:37pm
it's on iClarified post "how to SSH" https://www.iclarified.com/3221/how-to-ssh-into-your-iphone-using-winscp-windows I know u'll be lazy to read, so just jump to step 13...
D
D - October 20, 2009 at 10:16am
This patch for 3G/GS is available on cydia at the ifoneguide at the netherlands abbreviated source! *not sure if we can post links to cydia sources here, so decipher :)
Josh
Josh - October 20, 2009 at 9:10am
Has anyone heard if dev team is working on a 5.11.07 unlock? I have two paper weights sittin here so I was just wondering if there was any new news?
Mark
Mark - October 20, 2009 at 3:10pm
two?? you'd think people would learn their lesson after the first time, to not update their itunes or iphones without the greenlight from dev team!! =p
Josh
Josh - October 20, 2009 at 4:35pm
They are just two I recently bought to jailbreak, unlock and resell that had already been updated. I have two others that I use that are unlocked....... So yeah I am smart enough....
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download HomePod Firmware Files From
Where to Download macOS Sequoia
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS