Come eseguire il Jailbreak del tuo iPhone 4 usando PwnageTool (Mac) [4.3.2]

POST

MAIL

Posted May 6, 2011 at 3:03pm by iClarified · 294227 views

Queste sono le istruzioni per jailbreak del tuo iPhone 4 con iOS 4.3.1 usando PwnageTool per Mac.

Tappa 1
Creare una cartella sul desktop e chiamarla "Pwnage". All'interno, avrai bisogno di mettere alcune cose. Puoi trovare PwnageTool 4.3, here o qua.

Avrai anche bisogno del firmware 4.3.2 per il tuo iPhone.
4.3.2 (4 GSM): iPhone3,1_4.3.2_8H7_Restore.ipsw

Quando scarichi il file IPSW, è meglio farlo con Firefox perche Safari lo estrae automaticamente!

Come eseguire il Jailbreak del tuo iPhone 4 usando PwnageTool (Mac) [4.3.2]

Tappa 2
Fai un doppio click per montare PwnageTool e poi trascina l'icona PwnageTool nella cartella Pwnage.

Poi, dalla cartella Pwnage, fai doppio click per aprire l'applicazione PwnageTool.

Cliccare OK se esce fuori un avviso.

Tappa 3
Selezionare Expert Mode nel menu in alto

Tappa 4
Cliccare per selezionare il tuo dispositivo. Apparirà un segno di spunta sopra l'imagine del dispositivo. Cliccare la frecce blu per continuare.

Tappa 5
Arriverai alla pagina "Browse for l'IPSW". Cliccare su Browse for IPSW....

Dalla finestra pop-up selezionare il tuo firmware dalla cartella Pwnage e poi cliccare su Open.

Tappa 6
Vedrai un menu con alcune scelte. Selezionare General e poi clicca sulla freccia blu.

Dalle impostazioni General potrai scegliere le dimensioni della partizione. Scegliere Activate the phone se non sei con un operatore telefonico ufficiale allora cliccare sulla freccia blu.

NOTE*: Deselezionare Activate se hai un iPhone attivato legittimamente con un operatore telefonico ufficiale.

Il menu delle impostazioni Cydia ti permette di creare dei pacchetti personalizzati, cosi non devi installarli manualmente dopo.

Cliccare per selezionare Download packages il cavalierino. Poi cliccare Refresh per visualizzare i pacchetti disponibili. Faccendo doppio click sul pacchetto che desideri lo scharicherà e sara poi disponibile nel cavalierino Select Packages.

Seleziona quelli che vuoi (mettendo il segno di spunta) e poi cliccare sulla freccia blu.

Il menu Custom Packages Settings mostra la lista delle impostazioni degli pacchetti per il tuo IPSW personalizzato. Per addesso lascia le impostazioni come sono. Cliccare sulla freccia blu per continuare.

Tappa 7
Addesso sei pronto per iniziare il processo pwnage! Cliccare su Build per selezionarlo e poi cliccare Blue di nuovo sulla freccia blu per comminciare.

Tappa 8
Ti sara chiesto di salvare il tuo file .ipsw personalizzato. Salvarlo nella cartella Pwnage che è sul tuo desktop.

Addesso il tuo IPSW si sta costruendo. Calcola circa 10 minuti.

Ti sara chiesto la tua password di amministratore. Inserisci la e poi cliccare su OK.

Tappa 9
Una volta che il tuo ipsw è stato costruito, ti sara chiesto di collegare il tuo iPhone al computer. Una volta che PwnageTool vede il tuo iPhone, vedrai le istruzioni tappa per tappa per mettere il tuo iPhone nello stato DFU DFU.

Premere e tenere il tasto Home e il tasto On/Off e continuare a premere il tasto Home per 10 secondi. .

Poi rilasciare il pulsate On/Off e continuare a premere il pulsante Home per 10 secondi.

Una volta che il tuo iPhone è entrato nello stato DFU, PwnageTool ti dirà di apprire iTunes.

Tappa 10
Quando sei in iTunes, premere contemporaneamente i pulsanti Alt/Option e cliccare su Restaurare (Restore).

Tappa 11
Navigare alla cartella Pwnage su il tuo desktop usando la finestra di dialogo che appare. Selezionare l'IPSW personalizzato che è stato creato e cliccare Choose.

Tappa 12
iTunes ti rimetterà il firmware su il tuo iPhone. Anche questo può durare circa 10 minuti. Quando avrai finito il tuo iPhone si riavvierà, ma sara jailbroken con iOS 4.3.1!

***GRAZIE: Mille grazie al iPhone Dev-Team e a I0n1c per il loro duro lavoro che ha permesso l'esistenza di questo jailbreak!

Follow iClarified

David - June 28, 2011 at 6:13am

I have an iphone4, which was jailbroken and unlocked. I followed the instrructions to jailbreak for 4.3.3, and the phone seems to be stuck on the very last bit of the jailbreak restore...ie..the line under the apple completes to 95% of the way and stops. HELP! what do I do? Thanks anyone out there

Reply · Like · Mark as Spam

joel723 - June 25, 2011 at 10:05am

Nick, thank you! You're a genius and saved me. I was having the same issues, cydia refusing to open after pwnage JB 4.3.3. I re-pwned and followed your instructions and its now opening cydia so I was able to unlock with Ultrasn0w. Anyone else experiencing this issue, follow Nick's solution. Thanks!

kalpesh - June 24, 2011 at 5:38pm

m done with the jailbreak comfortably... but now i am without any network...? so wa do i do..?

chris - June 23, 2011 at 2:25am

For anybody looking for direct download links for all updated firmware, check out http://www.ipswnow.com

Brent - June 22, 2011 at 9:16pm

Step 0: Sync your iPhone so you have a recent backup and don't lose a few weeks of data.

Newbie - June 9, 2011 at 11:12pm

Ok. I am stuck on the last part. Every time I try to restore into my custom .ipsw, I get the dreaded This iPhone Could Not Be Restored 1601. I can get my phone to normal, but I would really like to go back to jailbroken status. Can anyone help? Where do I go from here?

Bragaadeesh - June 1, 2011 at 1:49pm

There is a couple of important steps need to be mentioned in this tutorial which will make it cleaner 1. Let know the users who are unlocking that ALL THE DATA IN THE PHONE WILL BE LOST. 2. Regarding the Activate Phone checkbox should not be applied for FACTORY UNLOCKED iPhones.

iMeL - May 27, 2011 at 2:41am

Everything is working fine, for those who is trying to upgrade their iPhone for the first time & only read this thread, of course u'll have problem coz u guys missed some steps prior to these. Do a little research & read earlier threads & then move along to these newer ones... Good Luck!!

POncho Carrillo - May 27, 2011 at 2:01am

Hi, after i finish installing the custom firmware 4.3.3, my 3g network doesnt work, i cant enter cydia or safari, is this normal?

Nick - June 24, 2011 at 12:26am

I finally found the solution to getting cydia from not crashing. With these steps or helper points and the real instructions, I've JB both a 3GS and 4 with the 4.3.3 mod. Also, I tried at least 10 times before getting things to work. So, I figured I'd spread the word.

1) During the install there are two screens in the packages area that say "Cydia" installer. Choose the one where it specifically says "Cydia Installer". If you choose the screen where it shows it in the list with all of the packages, your installer will die. 2) No luck with just doing a Restore / DFU without using the Pwnage tool. So far, it seems every time it fails you need to run through the entire builder process to get things to work with iTunes. 3) Don't choose ANY packages. Only the Cydia installer that is typically already preselected. You can install these later once a clean JB is good.

ExcelonGT - July 12, 2011 at 2:03am

Thank you! it only took me 3 attempts at the complete process before I got it fully working. I almost was about give up on jailbreaking and go "legit" if I hadnt found your post

David Port - May 23, 2011 at 12:34am

Just completed the jailbreak. Also unable to open Cydia. The only app I requested was "Install Cydia". Was I supposed to load something else? When you went to redsn0w, did you restore to standard 4.3.3 first or go directly to redsn0w?

Sam - May 26, 2011 at 6:45pm

If you have an older baseband, there is a conflict with it and Apple's upgraded baseband. It's purely cosmetic....if you want to know what your reception is, download and run ultrasnow and this should take care of it. Make sure though that your VVM works by playing your greeting...sometimes there is a glitch and it won't work (just reboot your phone and that should take care of it). Also, beware...ultrasnow is running in the background and will drain your battery faster.

apek - May 11, 2011 at 6:39pm

Hello! I run version 4.1 with baseband version 02.10.04. I saved with TinyUmbrella my SHSH. I tried to jailbreak using pwnage tool (mac) 4.3.3 but it didn't work. When I finish DFU mode with sucess and I try to restore Itunes with iPhone3,1_4.3.3_8J2_Custom_Restore.ipsw there is massage in Itunes This device isn't eligible for the requested build. Please some one can help me?

varma - May 11, 2011 at 9:43pm

comment the line which has gs.apple.com in my hosts file (/etc/hosts) That will resolve your problem.

Hagen - May 10, 2011 at 10:21am

I jailbreak as the tutorial said Now Cydia won't open... On my iPhone 4 Help!!! What should I do to fix it?

Justabrake - May 10, 2011 at 11:08am

Same here followed directions 3xs Why is there a problem with this ? IClarified

Daniel Maier - May 10, 2011 at 10:31pm

I didn't have any problem with Cydia after this upgrade with Pwnage Tool. It was just a btch to get it restored with the custom firmware. I ran from 4.3.2 to 4.3.3 on BB 03.10.01 iPhone 4, and you folks?

Mike - May 11, 2011 at 1:16pm

Hey. I just bought an iphone 4 and still running the stock 4.3. Have not yet upgraded through itunes. Was wondering if this jailbreak is efficient to do or not ?

hagen - May 11, 2011 at 11:53pm

i used the redsnow method now its working great but use the new version of redsnow here's the tutorial https://www.iclarified.com/entry/index.php?enid=14567 this is the redsnow i use redsn0w 0.9.6rc15 https://www.iclarified.com/entry/index.php?enid=15002 it work for me... ^_^

94 More Comments