February 26, 2024
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Posted May 6, 2011 at 3:03pm by iClarified · 297939 views
EnglishFrenchGermanIndonesianItalianPortuguese (Brazil)SpanishSwedish
Essas são instruções de como fazer o jailbreak do seu iPhone 4 com iOS 4.3.2 usando o PwnageTool para Mac.

Passo 1
Crie uma pasta chamada "Pwnage" no seu desktop. Você precisará de algumas coisas: PwnageTool 4.3.2, pode ser encontrado aqui: here.

Você também precisará da firmware 4.3.2 do iPhone.
4.3.2 (4 GSM): iPhone3,1_4.3.2_8H7_Restore.ipsw


É melhor usar o Firefox para baixar a firmware (IPSW) porque o Safari descompacta o arquivo automaticamente!
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 2
Monte o PwnageTool.dmg (clique duplo), depois arraste o icone do PwnageTool para a pasta criada anteriomente.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

A partir da pasta Pwnage execute o PwnageTool.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Clique em Ok se aparecer um alerta.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 3
Clique para selecionar o "Modo Expert" Expert Mode na barra superior do programa:
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 4
Clique para selecionar o dispositivo que voce possui. Uma marca apecerá sobre a imagem do dispositivo. Clique em continuar (seta azul).
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 5
Na página "Browse for IPSW", clique em Browse for IPSW......
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Na janela que aparecerá, selecione a firmware na pasta Pwnage (que voce baixou no passo 1) depois clique em Open.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 6
Na proxima janela, voce terá várias opções a selecionar. Clique para selecionar General, depois clique em continuar (seta azul).
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

As opções gerais (General) permitem que você decida, por exemplo o tamanho da partição. Selecione Activate the phone se você NÃO possui o desbloqueio oficial (desbloqueado pela operadora).

NOTA*: Não selecione Activate se você POSSUI o desbloqueio oficial (desbloqueado pela operadora).
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

As opções do Cydia permitem que voçê crie pacotes personalizados para que voçê não precise instala-los depois.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Selecione a aba Download packages. Clique em Refresh para mostrar os pacotes disponíveis. Clique 2x no pacote que voce deseja para seleciona-los. Ficarão disponíveis na aba Select Packages.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Marque os que você deseja, depois clique em continuar (seta azul).
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

O menu Custom Packages Settings lista os pacotes selecionados para serem incluídos no IPSW personalizado. Por ora, deixe como está. Clique em continuar (seta azul).
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 7
Você está pronto para continuar o processo de pwnage. Clique no botão Build para seleciona-lo e então clique em continuar (seta azul) para começar.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 8
Você precisará salvar seu arquivo .ipsw personalizado. Salve-o na pasta que criamos no início (Pwnage).
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

O arquivo IPSW agora está sendo construído. Esse processo pode levar até 10 minutos. Aguarde!
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Será solicitado que você digite a senha de administrador do Mac. Faça isso e clique em OK.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 9
Assim que o IPSW for criado, você será solicitado a conectar o iPhone ao computador. Quando ele detectar o dispositivo, o programa (PwnageTool) vai te guiar pelos passos para colocar o iPhone em modo DFU.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Pressione o segure o botão de ligar e o botão "home" por 10 segundos.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Então solte o botão de ligar e continue segurando o botão "home" por mais 10 segundos.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Assim que o iPhone entrar em modo DFU, o PwnageTool pedirá para você iniciar o iTunes.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 10
Abra o iTunes, segure as teclas Alt/Option depois clique em Restore/Restaurar.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 11
Procure na pasta que criamos (Pwnage) no desktop usando a janela que aparecerá. Selecione o arquivo IPSW PERSONALIZADO que foi criado e clique em Choose/Selecionar.
Como fazer o Jailbreak do iPhone 4 usando o PwnageTool (Mac) [4.3.2]

Passo 12
O iTunes irá restaurar a firmware personalizada no seu iPhone. Esse processo pode levar até 10 minutos. Quando terminar, o iPhone reiniciará já jailbroken na versão iOS 4.3.2!


***AGRADECIMENTO: Obrigado ao iPhone Dev-Team e I0n1c pelo esforço em fazer esse tutorial possível!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
You must login or register to add a comment...
David
David - June 28, 2011 at 6:13am
I have an iphone4, which was jailbroken and unlocked. I followed the instrructions to jailbreak for 4.3.3, and the phone seems to be stuck on the very last bit of the jailbreak restore...ie..the line under the apple completes to 95% of the way and stops. HELP! what do I do? Thanks anyone out there
joel723
joel723 - June 25, 2011 at 10:05am
Nick, thank you! You're a genius and saved me. I was having the same issues, cydia refusing to open after pwnage JB 4.3.3. I re-pwned and followed your instructions and its now opening cydia so I was able to unlock with Ultrasn0w. Anyone else experiencing this issue, follow Nick's solution. Thanks!
kalpesh
kalpesh - June 24, 2011 at 5:38pm
m done with the jailbreak comfortably... but now i am without any network...? so wa do i do..?
Brent
Brent - June 22, 2011 at 9:16pm
Step 0: Sync your iPhone so you have a recent backup and don't lose a few weeks of data.
Newbie
Newbie - June 9, 2011 at 11:12pm
Ok. I am stuck on the last part. Every time I try to restore into my custom .ipsw, I get the dreaded This iPhone Could Not Be Restored 1601. I can get my phone to normal, but I would really like to go back to jailbroken status. Can anyone help? Where do I go from here?
Bragaadeesh
Bragaadeesh - June 1, 2011 at 1:49pm
There is a couple of important steps need to be mentioned in this tutorial which will make it cleaner 1. Let know the users who are unlocking that ALL THE DATA IN THE PHONE WILL BE LOST. 2. Regarding the Activate Phone checkbox should not be applied for FACTORY UNLOCKED iPhones.
iMeL
iMeL - May 27, 2011 at 2:41am
Everything is working fine, for those who is trying to upgrade their iPhone for the first time & only read this thread, of course u'll have problem coz u guys missed some steps prior to these. Do a little research & read earlier threads & then move along to these newer ones... Good Luck!!
POncho Carrillo
POncho Carrillo - May 27, 2011 at 2:01am
Hi, after i finish installing the custom firmware 4.3.3, my 3g network doesnt work, i cant enter cydia or safari, is this normal?
Nick
Nick - June 24, 2011 at 12:26am
I finally found the solution to getting cydia from not crashing. With these steps or helper points and the real instructions, I've JB both a 3GS and 4 with the 4.3.3 mod. Also, I tried at least 10 times before getting things to work. So, I figured I'd spread the word.

1) During the install there are two screens in the packages area that say "Cydia" installer. Choose the one where it specifically says "Cydia Installer". If you choose the screen where it shows it in the list with all of the packages, your installer will die. 2) No luck with just doing a Restore / DFU without using the Pwnage tool. So far, it seems every time it fails you need to run through the entire builder process to get things to work with iTunes. 3) Don't choose ANY packages. Only the Cydia installer that is typically already preselected. You can install these later once a clean JB is good.
ExcelonGT
ExcelonGT - July 12, 2011 at 2:03am
Thank you! it only took me 3 attempts at the complete process before I got it fully working. I almost was about give up on jailbreaking and go "legit" if I hadnt found your post
David Port
David Port - May 23, 2011 at 12:34am
Just completed the jailbreak. Also unable to open Cydia. The only app I requested was "Install Cydia". Was I supposed to load something else? When you went to redsn0w, did you restore to standard 4.3.3 first or go directly to redsn0w?
Sam
Sam - May 26, 2011 at 6:45pm
If you have an older baseband, there is a conflict with it and Apple's upgraded baseband. It's purely cosmetic....if you want to know what your reception is, download and run ultrasnow and this should take care of it. Make sure though that your VVM works by playing your greeting...sometimes there is a glitch and it won't work (just reboot your phone and that should take care of it). Also, beware...ultrasnow is running in the background and will drain your battery faster.
apek
apek - May 11, 2011 at 6:39pm
Hello! I run version 4.1 with baseband version 02.10.04. I saved with TinyUmbrella my SHSH. I tried to jailbreak using pwnage tool (mac) 4.3.3 but it didn't work. When I finish DFU mode with sucess and I try to restore Itunes with iPhone3,1_4.3.3_8J2_Custom_Restore.ipsw there is massage in Itunes This device isn't eligible for the requested build. Please some one can help me?
varma
varma - May 11, 2011 at 9:43pm
comment the line which has gs.apple.com in my hosts file (/etc/hosts) That will resolve your problem.
Hagen
Hagen - May 10, 2011 at 10:21am
I jailbreak as the tutorial said Now Cydia won't open... On my iPhone 4 Help!!! What should I do to fix it?
justabrake
justabrake - May 10, 2011 at 11:08am
Same here followed directions 3xs Why is there a problem with this ? IClarified
Daniel Maier
Daniel Maier - May 10, 2011 at 10:31pm
I didn't have any problem with Cydia after this upgrade with Pwnage Tool. It was just a btch to get it restored with the custom firmware. I ran from 4.3.2 to 4.3.3 on BB 03.10.01 iPhone 4, and you folks?
Mike
Mike - May 11, 2011 at 1:16pm
Hey. I just bought an iphone 4 and still running the stock 4.3. Have not yet upgraded through itunes. Was wondering if this jailbreak is efficient to do or not ?
hagen
hagen - May 11, 2011 at 11:53pm
i used the redsnow method now its working great but use the new version of redsnow here's the tutorial https://www.iclarified.com/entry/index.php?enid=14567 this is the redsnow i use redsn0w 0.9.6rc15 https://www.iclarified.com/entry/index.php?enid=15002 it work for me... ^_^
hagen
hagen - May 12, 2011 at 12:02am
well its worth it if you wanna cusmtumize the iphone 4 theme theres great themes out there n mad cool too... also look for MY3G app from cydia its no free but cost every penny what it do for example no need for wifi to do facetime thats one of many of the use for also MYWIFI no need to get a tethering plan, it allows you to create a hotspot using your 3G connection. five icon dock, winterboard, mixtube, firewall IP and many other... its up to you
93 More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS