Anleitung zum Unlock/Jailbreak des iPhone 2G mit OS 3.0 durch RedSn0w (Windows)
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted June 20, 2009 at 7:22am by iClarified
Diese Anleitung zeigt ihnen, wie man sein iPhone 2G mit dem OS 3.0 unter Windows mit RedSn0w jailbreaken und unlocken kann. Vor dem Start stelle sicher, dass iTunes 8.2 installiert ist.
Die Mac-Version dieses Tutorials befindet sich hier
Schritt eins Erstelle einen Ordner namens Pwnage auf deinem Desktop
Schritt zwei Verbinde dein iPhone mit deinem PC und starte iTunes.
Wähle dein iPhone aus der Liste der Geräte links. Jetzt halte Shift gedrückt und klick auf den Wiederherstellen-Button. Restore wird bevorzugt genutzt, da so kein verlorener Speicher auf dem iPhone entsteht.
Navigiere zum Pwnage-Ordner und wähle die heruntergeladene .ipsw aus (Eventuell wird diese Datei nicht angezeigt, wenn ja, musst du den Ordner öffnen, in dem sich die Datei befindet und die Dateiendung von ".zip" auf ".ipsw" ändern. Sollten keine Dateiendung angezeigt werden, wähle im Explorer "Extras -> Ordneroptionen... -> Ansicht" und entferne den Haken bei "Erweiterungen von bekannten Dateitypen ausblenden"). Klicke auf Öffnen zum fortsetzen.
Schritt drei Wenn iTunes mit dem Update fertig ist, starte die redsnw0w.exe aus dem Pwnage-Ordner auf deinem Desktop.
Schritt vier Wenn sich RedSn0w geöffnet hat, klicke auf den Browse-Button.
Schritt fünf Wähle die Firmware .ipsw aus, die sich im Pwnage-Ordner auf dem Desktop befindet und klicken auf Open
Schritt sechs Wenn die Firmware verifiziert wurde, klicke auf den Next-Button.
Schritt sieben Sei dir sicher, dass Cydia und Unlock ausgewählt sind und klicke auf den Next button.
Schritt acht Jetzt müssen die Bootloader-Dateien ausgewählt werden.
Klicke auf Browse und wähle die 3.9-Bootloader-Datei aus dem Pwnage-Ordner von deinem Desktop aus.
Klicke auf Browse und wähle die 4.6-Bootloader-Datei aus dem Pwnage-Ordner von deinem Desktop aus.
Klicke auf den Next-Button um fortzufahren.
Schritt neun Bitte stecke dein iPhone an deinen Computer und schalte es aus. Wenn du sicher bist, dass dein iPhone angeschlossen und aus ist, klicke auf den Next-Button.
Schritt zehn RedSn0w wird dich nun durch die Schritte führen, die nötig sind um in den DFU-Modus zu gelangen.
Also musst du den Home-Knopf und den Power-Knopf für 10 Sekunden halten.
Danach lässt du denPower-Knopf los und hältst weiterhin den Home-Knopf bis RedSn0w das Gerät erkennt.
Schritt elf Dein iPhone wird nun neu starten.
Schritt zwölf Danach beginnt RedSn0w die RAM Disk hochzuladen.
Schritt dreizehn Sobald das getan ist, wird RedSn0w "Done" sagen, also dass es fertig ist. Drücke auf den Finish-Button. Wenn dein iPhone mit dem neu hochfahren fertig ist (dauert circa 5 Minuten). Es wird den BootNeuter starten und wird dann von Cydia auf dem SpringBoard geunlocked/gejailbreaked.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
The redsn0w 0.9.4 doesn't recognize 3.1.3. So what I did is:
- in iTunes, put 3.1.3 to the phone
- use redsn0w 0.9.3, browser-> load in iphone OS 3.1.2, then follow the rest ...
everything works.
Go to this link: http://modmyi.com/forums/iphone-news/638291-windows-how-jailbreak-unlock-iphone-2g-firmware-3-0-redsn0w.html
You can download them from here. Save them to the desktop file pwnage as designated.
I have a 2G iPhone that im trying to unlock, when i follow the instruction and get to itunes it takes me to the invalid sim card. Any suggestions on how to get around it????
I got the same message on my iphone when i unlocked it. all i did was continue on with the instructions and everything worked fine once it was all said and done
Hi everyone, i have a question, hope you can help me.
I have a 2G Iphone that i jailbroke with Pwnage tool to get firmware 2.2 and it works fine.
I was wondering if i can i use this method to upgrade it to firmware 3 without leaving it unjailbroken or messing up the baseband?
Thanks!
I unlocked my phone using the RedSn0w, everything worked perfectly. But the volume is very very low, I can barely hear the other person. I tried to download a volume patch through Cydia, but the one with the drill icon won't download, says something about size being mismatched. I tried downloading one for the 2.0 version, it download and says installed, but there's no difference. Does anyone know how to fix this? Thanks
I'm stuck in step 2. When I open my iTunes, the restore screen doesn't come out. A box came out and says that my sim card is not compatible. What should I do? Help !!
I think if you have a fresh phone that's never been used, you can skip Step two (b/c iTunes won't connect to the phone since you don't have an AT&T sim in it). Just go straight to step 3. Hope this helps.
I unlocked the phone successfully following the steps, but cannot get connected to the internet. It shows I'm connected to my wifi at home and the little blue internet icon (the little blue fan shaped icon on the top of the screen) is on, but when I try to open Cydia or Safari, it shows there's no internet connection. Can anyone help me with this? Thanks!
nvm--i put in a sim card and all of a sudden the internet is connecting...does anyone know why though? isn't the wifi network independent from the phone service carrier (i'm not subscribed to internet use thru my phone plan)?
Yes it does. I just went through this process and it worked! If it says your sim is not for the right carrier, just keep going with the process and everything will work fine at the end.
I am trying to jailbreak/unlock iPhone using this guide..
But the phone isn't activated! I have everything I need to do this but I don't know how I can go about upgrading the firmware for this device without activating the phone..
I downloaded the 3.1 firmware but it comes as a zipped file instead of ipsw, so I tried downloading the 3.0 version and it's the samething. When I tried to unzip it, it's just a bunch of weird files and a couple of folders and there's nothing with the whate square iTunes logo like the one show in the tutorial pics. Can anyone help me with this? Thanks!
You have to save it as .ipsw instead of zip.
Right click on the link, then in the end of the name, write .ipsw and then click "download" or "OK" or whatever it says.
Sorry I'm being slow (not a computer savy person), but when I right click on the link like you said, it just comes up with the normal options such as Open, Open in New Tab, etc, I don't see where I can type in '.ipsw' in place of 'zip'. When I click on the Download option from the right clicked option list, it still doesn't give me option to replace 'zip'. Can you elaborate on how to download this as a ipsw file? Thanks!
I have now successfully made all the steps. All things worked fine.
However, i discovered you can't use the 3.0.1 version when using vista, go with the 3.0 instead.
I'm having problem launching cydia.
Yesterday, when i used the guide, no problems what so ever using cydia afterwards.
Today, i was going to install some stuff using Cydia. When I tapped the icon, it started to load as usual, then a message pops up saying some files are missing and are not up to date then i pressed OK, then it shut down to springboard.
Now, when tapping the Cydia icon, it says "Loading Data", ´then shuts down to the springboard. What could be wrong?
Also, I checked the "Icy" box when using Redsn0w, so I have both Cydia and Icy.
I installed the Mobileterminal via Icy, but Terminal won't start either. It just shuts down and goes back to springboard. Will the Icy app interrupt Cydia or what? Please Help :)