Como Desbloquear y hacerle Jailbreak al iPhone 2G OS 3.0 usando Redsn0w Windows
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted June 20, 2009 at 7:22am by iClarified
Estas son las instrucciones para desbloquear y hacerle jailbreak a tu iPhone 2G con el firmware 3.0 usando Redsn0w para Windows. Antes de comenzar asegúrate de actualizar iTunes a la versión 8.2.
Puedes encontrar la versión para Mac de este tutorial here
Paso Uno Crea una carpeta llamada Pwnage en tu escritorio.
Descomprime el archivo zip RedSn0w en la carpeta Pwnage.
Paso Dos Conecta tu iPhone a la computadora y ejecuta iTunes.
Selecciona tu iPhone en la lista de dispositivos a la izquierda. Ahora deja presionada la tecla Shift y haz click en el botón Restaurar. Es preferible restaurar ya que no perderás espacio con datos que quedarían inaccesibles y te ocuparían valiosos megas en el disco de tu iPhone.
Navega a la carpeta Pwnage que creaste en tu escritorio y selecciona el firmware ipsw. Haz click en el botón Abrir para continuar.
Paso Tres Una vez que iTunes ha terminado de actualizar tu iPhone al firmware seleccionado puedes ejecutar redsnw0w.exe de la carpeta Pwnage en tu escritorio.
Paso Cuatro Cuando RedSn0w abra, haz click en el botón Browse
Paso Cinco Selecciona el archivo ipsw del firmware que haz colocado en la carpeta Pwnage en tu escritorio y haz click en Open
Paso Seis Una vez que el firmware ha sido verificado haz click en el botón Next para continuar.
Paso Siete Asegúrate de que Cydia y Unlock están seleccionados y haz click en el botón Next.
Paso Ocho Ahora necesitamos indicar la ubicación de los archivos de bootloader.
Haz click en Browse y selecciona el archivo de bootloader 3.9 de la carpeta Pwnage en tu escritorio.
Haz click en Browse y selecciona el archivo de bootloader 4.6 de la carpeta Pwnage en tu escritorio.
Haz click en el botón Next para continuar.
Paso Nueve Ahora enchufa tu iPhone a la computadora y asegurate de que se encuentre APAGADO y luego haz click en el botón Next
Paso Diez RedSn0w ahora te guiará en los pasos para poner el iPhone en modod DFU.
Deja presionados el botón de Home y el botón de Power durante 10 segundos.
Suelta el botón de Power y continúa presionando el botón Home hasta que RedSn0w detecte el dispositivo.
Paso Once Tu iPhone ahora se reiniciará:
Paso Doce RedSn0w comenzará a cargar el nuevo RAM Disk.
Paso Trece Una vez que esto finalice, serás notificado que RedSn0w ha terminado. Haz click en el botón Finish. Cuando tu iPhone termine de reiniciar (aproximadamente 5 minutos), ejecutará BootNeuter y luego quedará desbloqueado y con jailbreak con Cydia instalado en el SpringBoard.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
The redsn0w 0.9.4 doesn't recognize 3.1.3. So what I did is:
- in iTunes, put 3.1.3 to the phone
- use redsn0w 0.9.3, browser-> load in iphone OS 3.1.2, then follow the rest ...
everything works.
Go to this link: http://modmyi.com/forums/iphone-news/638291-windows-how-jailbreak-unlock-iphone-2g-firmware-3-0-redsn0w.html
You can download them from here. Save them to the desktop file pwnage as designated.
I have a 2G iPhone that im trying to unlock, when i follow the instruction and get to itunes it takes me to the invalid sim card. Any suggestions on how to get around it????
I got the same message on my iphone when i unlocked it. all i did was continue on with the instructions and everything worked fine once it was all said and done
Hi everyone, i have a question, hope you can help me.
I have a 2G Iphone that i jailbroke with Pwnage tool to get firmware 2.2 and it works fine.
I was wondering if i can i use this method to upgrade it to firmware 3 without leaving it unjailbroken or messing up the baseband?
Thanks!
I unlocked my phone using the RedSn0w, everything worked perfectly. But the volume is very very low, I can barely hear the other person. I tried to download a volume patch through Cydia, but the one with the drill icon won't download, says something about size being mismatched. I tried downloading one for the 2.0 version, it download and says installed, but there's no difference. Does anyone know how to fix this? Thanks
I'm stuck in step 2. When I open my iTunes, the restore screen doesn't come out. A box came out and says that my sim card is not compatible. What should I do? Help !!
I think if you have a fresh phone that's never been used, you can skip Step two (b/c iTunes won't connect to the phone since you don't have an AT&T sim in it). Just go straight to step 3. Hope this helps.
I unlocked the phone successfully following the steps, but cannot get connected to the internet. It shows I'm connected to my wifi at home and the little blue internet icon (the little blue fan shaped icon on the top of the screen) is on, but when I try to open Cydia or Safari, it shows there's no internet connection. Can anyone help me with this? Thanks!
nvm--i put in a sim card and all of a sudden the internet is connecting...does anyone know why though? isn't the wifi network independent from the phone service carrier (i'm not subscribed to internet use thru my phone plan)?
Yes it does. I just went through this process and it worked! If it says your sim is not for the right carrier, just keep going with the process and everything will work fine at the end.
I am trying to jailbreak/unlock iPhone using this guide..
But the phone isn't activated! I have everything I need to do this but I don't know how I can go about upgrading the firmware for this device without activating the phone..
I downloaded the 3.1 firmware but it comes as a zipped file instead of ipsw, so I tried downloading the 3.0 version and it's the samething. When I tried to unzip it, it's just a bunch of weird files and a couple of folders and there's nothing with the whate square iTunes logo like the one show in the tutorial pics. Can anyone help me with this? Thanks!
You have to save it as .ipsw instead of zip.
Right click on the link, then in the end of the name, write .ipsw and then click "download" or "OK" or whatever it says.
Sorry I'm being slow (not a computer savy person), but when I right click on the link like you said, it just comes up with the normal options such as Open, Open in New Tab, etc, I don't see where I can type in '.ipsw' in place of 'zip'. When I click on the Download option from the right clicked option list, it still doesn't give me option to replace 'zip'. Can you elaborate on how to download this as a ipsw file? Thanks!
I have now successfully made all the steps. All things worked fine.
However, i discovered you can't use the 3.0.1 version when using vista, go with the 3.0 instead.
I'm having problem launching cydia.
Yesterday, when i used the guide, no problems what so ever using cydia afterwards.
Today, i was going to install some stuff using Cydia. When I tapped the icon, it started to load as usual, then a message pops up saying some files are missing and are not up to date then i pressed OK, then it shut down to springboard.
Now, when tapping the Cydia icon, it says "Loading Data", ´then shuts down to the springboard. What could be wrong?
Also, I checked the "Icy" box when using Redsn0w, so I have both Cydia and Icy.
I installed the Mobileterminal via Icy, but Terminal won't start either. It just shuts down and goes back to springboard. Will the Icy app interrupt Cydia or what? Please Help :)