Cómo realizar el Jailbreak en tu iPhone o iPod utilizando BlackRa1n [Windows]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted October 11, 2009 at 5:07am by iClarified
Estas son las instrucciones para llevar a cabo el Jailbreak en tu iPhone o iPod Touch utilizando BlackRa1n para Windows
El Jailbreak con BlackRa1n funcionará con el último firmware 3.1.2; sin embargo BlackRa1n no realizará la activación del terminal si utilizas un operador que no sea oficial y autorizado por Apple.
Para aquellos que tienen el nuevo iPod Touch de 3ª generación, BlackRa1n sólo soporta un Jailbreak conectado al ordenador. Esto significa que no debes dejar que la batería se agote ni apagar el iPod Touch, pues si eso ocurriera sería necesario reconectarlo al ordenador y utilizar BlackRa1n para poder iniciarlo.
AVISO IMPORTANTE: Aunque el jailbreak de GeoHot soporta el firmware 3.1.2, no realices la actualización si estás utilizando OS 3.0.1 o 3.0. Perderás el desbloqueo. Utiliza PwnageTool para realizar una actualización segura a la versión 3.1 sin actualizar la baseband. Si realmente necesitas la versión 3.1.2, espera a la próxima versión de PwnageTool. Si ya has actualizado a la versión 3.1 o 3.1.2 sin utilizar PwnageTool, habrás perdido la posibilidad de realizar el desbloqueo, al menos de momento. Al menos ahora puedes utilizar BlackRa1n para recuperar el jailbreak.
Ok. comencemos..
Primer paso Abre el navegador de tu elección y accede a http://www.blackra1n.com. Haz click en el logotipo de Windows al final de la página.
Segundo paso Guardar el archivo descargado en el escritorio cuando se pregunte por el destino de la descarga.
Tercer paso A continuación haz doble clic sobre el archivo ejecutable blackra1n en el escritorio para ejecutar el programa.
Cuarto paso Asegúrate de que tu iPhone o iPod está conectado al ordenador y haz clic en el botón denominado make it ra1n.
Quinto paso Tu iPhone o iPod entrará ahora en modo de recuperación.
Verás una imagen de GeoHot que reemplaza la pantalla habitual del modo de recuperación en tu dispositivo.
blackra1n se ejecutará y tu dispositivo se reiniciará.
Se mostrará un aviso informando de que BlackRa1n es un software gratuito y que se agradecería si pudieras realizar un donativo a GeoHot en geohot@gmail.com.
Sexto paso Una vez que el dispositivo se reinicie, tendrá el jailbreak realizado y verás un icono de blackra1n el escritorio de tu iPhone o iPod. Asegúrate de tener conexión con Internet y púlsalo para lanzar la aplicación.
Elije el instalador que más te guste y pulsa el botón Install en la parte superior derecha de la pantalla
BlackRa1n comenzará a descargar e instalar el paquete que has seleccionado
Séptimo paso Una vez completado, BlackRa1n realizará un reinicio del escrtitorio (respring) de tu iPhone o iPod Touch y verás el programa seleccionado en el Springboard.
Octavo paso Una vez confirmado que tu instalador está funcionando correctamente, puedes usar el botón Uninstall blackra1n dentro de la aplicación BlackRa1n para eliminarlo del springboard.
***GRACIAS: Muchas gracias a Geohot por hacer posible este jailbreak possible. Y también muchas gracias a todos aquellos que han contribuído a que sea posible.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Ok, um, I did the whole jailbreak thing but the blackra1n app is still open and says done, wait for reboot. My iPod is on but there's no blackra1n icon yet. What's with that?
This will not work for any Idevice after the second gen iPhone but for those that want to jailbreak a ios 6.0 - 6.1.2 Idevice you can use evasi0n by the evaders. It's is really simple and it is UNTETHERED which means that if the battery dies you won't have to reboot with evasi0n
Hope it helps :)
Hi
I jailbroken my iphone 1st gen 3.1.2 using blackra1n and then used bootneuter from cydia to unlock it
Afterwards, the phone worked perfectedly until after I restored my old contacts using itunes, now my iphone is frozen with black screen, with an apple logo and a loading bar that doesnt move
iphone 3gs with 3.1.2 os i jailbroke my phone about 2 months ago (tethered jailbreak) used blackra1n rc3. my battery died and have to rerun blackra1n to reboot, i tried this but the iphone3gs stays in restore mode. when i ran blackra1n to reboot, geohotz face shows up on the phone for a couple of seconds and then phone shuts off and goes back into restore mode. i tried with windows 7,Vista and xp still no luck. i dont want to try spirit JB due to no unlock for t mobile. can anyone help me please. reply here or email me. smurvine@gmail.com thanks in advance
I have an iphone 3gs 3.1.2... i had it thetered unlocked with blackra1n but suddenly when it ran out of battery and tried to unlocked, after the tipical screen comes up it shuts down again... what is happening...can somebody tell? and what to do...please...im without cell phone and i need it a lot!!!!!! please thanks........ help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
The process works fine for me, until Step 5. My phone goes into recovery mode, but the geohot screen doesnt appear, a black screen remains. Anybody be able to help me out?
Can someonehelp, I'm really new to all this. My iPhone is the best thing since pants with pockets here, but I am not eactly sure what a jailbreak is. I mean I have a 3g 16 n the 8g do I wanna jailbreak it Att is my wireless company. What will doing this allow me to do with this phone that I can't already?? Does it not reaquiere me a carriers? Please help me! - old skool. Thanks!!!
Jailbreak, allows you to download and install unlimited free applications through cydia instead of using itunes, you can changue the initial screen on your iphone, wallpapers, anything you want to do. Jailbreak does not mean unlocked so you only can use your phone with your actual carrier, once the phone is jailbroken it can be unlocked to use it with any carrier.
Need help!
my iPhone is with 3.0 firmware and jailbroken with redsnow.
how do i upgraded it to 3.1.2 and jailbreak it with blackra1n with the provided steps above.
Thanks in advance!
Guys help me out here. I used blackra1n to jailbreak my 3GS 3.1.2 device . It was fine till I reached the springboard. The wireless was not working properly. I uninstalled blackra1n but after reinstalling it I can't get the icon anymore. I can't restore the Iphone coz the latest update is 3.1.3 and blackra1n won't work with it.
Can anyone help me?
the same thing happened to me although i also deleted cydia and i had installous and winterboard (two app things that are not deletable by just holding then pressing the cross) on my ipod as icons and u need cydia to uninstall them so i had to reinstall cydia but u cant coz this blackra1n won't reinstall!!
WE RLY NEED HELP!!
hey all i am REALLY confused and need some help here. I have purchased a brand new still sealed in the box iPhone 2G and need to unlock it for Tmobile. But ALL the unlocks I have found that work with the newer firmware (blackra1n, redsn0w) require me to update to 3.1.2 before running the jailbreak. How is it possible for me to update to 3.1.2 when I can't even activate my phone, because I am not going on AT&T! I can't find the answer to this anywhere, please help!!!! Can i just take my iPhone 2G out of its original box and use blackra1n right away? Do I start blackrain with my tmobile SIM in, or no SIM?
Hello. Thank you for posting these wonderful goodies to jailbreak iphones. here are couple of my questions. I jailbroke 2 iphones 3G and 3GS.
Both phone does have the version 3.1.2 and moderm firmware of 05.11.07
For the 3G I can no longer send MMS pics. Any suggestions?
For the 3GS i lost the Mail icon. Any suggestions?
Greatly appreciated if someone can help me..