Πως να κανετε jailbreak το Iphone - Ipod με Blackra1n [Windows]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted October 11, 2009 at 5:07am by iClarified
Οδηγιες για τον τροπο που θα κανετε jailbreak το iPhone και iPod touch χρησιμοποιοντας BlackRa1n για Windows..
Το BlackRa1n jailbreak θα δουλεψει μονο με την 3.1.2 firmware; παρολα αυτα, δεν θα κανει hacktivate το iPhone. Αυτο σημαινει οτι αν δεν χρησιμοποειτε τον official παροχο εγκεκριμενο απο την Apple το BlackRa1n δεν μπορει να κανει activate.
Για εκεινους που εχουν το καινουργιο iPod touch,το BlackRa1n κανει μονο tethered jailbreak. Αυτο σημαινει οτι απο την στιγμη που θα κανετε jailbreak δεν πρεπει να αφησετε την μπαταρια να πεσει τοσο ωστε να κλεισει γιατι σ'αυτην την περιπτωση θα πρεπει να ξαναγινει η ιδια διαδικασια με το BlackRa1n για να κανετε boot.
ΠΡΟΣΟΧΗ: Παρολο που το jailbreak του GeoHot υποστηριζει την 3,1,2 μην κανετε update αν εχετε σε iPhone OS 3.0.1 or 3.0.Θα χασετε το unlock. Χρησιμοποιειστε το PwnageTool για να κανετε με ασφαλεια update σε 3.1 χωρις να αναβαθμιστει και η baseband. Αν χρειαζεστε οπωσδηποτε την 3.1.2 τοτε περιμενετε για την επομενη εκδοση του PwnageTool. Αν εχετε κανει ηδη update στην 3.1 3.1.2 χωρις PwnageTool εχετε χασει προσ το παρον την δυνατοτητα να ξεκλειδωσετε το τηλεφωνο σας και μπορειτε απλα να χρησιμοποιεισετε το BlackRa1n για να ανακτησετε τουλαχιστον το jailbreak σας...
Ok ας αρχισουμε...
1ο Βημα Ανοιξτε τον browser της αρεσκειας σας και πατε στο http://www.blackra1n.com. Καντε click στο logo των Windows στο κατω μερος της σελιδας.
2ο βημα Καντε save το αρχειο στην επιφανεια εργασιας
3ο βημα Κανστε διπλο click blackra1n .exe απο την επιφανεια εργασιας για να τρεξετε το προγραμμα
4ο βημα Βεβαιωθειτε οτι εχετε συνδεσει την συσκευη σας στο PC και επειτα πατηστε το μαγαλο κουμπι που αναγραφει make it ra1n .
5ο Βημα Η συσκευη σας τωρα θα μπει σε recovery mode.
Θα δειτε μια φωτογραφια του GeoHot που αντικαθιστα την κανονικη εικονα του recovery mode.
Το blackra1n θα τρεξει και θα επανεκινησει την συσκευη σας.
Ενα popup μηνυμα θα εμφανιστει που θα σας ενημερωνει οτι το BlackRa1n ειναι ελευθερο λογισμικο και να κανετε donate στον GeoHot στο geohot@gmail.com.
6ο Βημα Οταν η συσκευη σας κανει το reboots θα ειναι jailbroken και θα προσεξετε ενα εικονιδιο του blackra1n στο springboard. Βεβαιωθειτε οτι εχετε συνδεση internet και πατηστε το εικονιδιο για να τρεξετε την εφαρμογη.
Διαλεξτε τον installer της επιλογης σας και μετα πιεστε Installεπανω δεξια στην οθονη.
Το BlackRa1n θα αρχισει να κανει download και install τον installer που επιλεξατε.
7ο Βημα Οταν το BlackRa1n ολοκληρωσει το install θα κανει αυτοματα respring το iPhone και θα δειτε το εικονοδιο του installer που επιλεξατε στο Springboard.
8ο Βημα Οταν εχετε βεβαιωθει οτι εχετε βαλει τον ή τους installers που θελετε και δουλευει σωστα μπορειτε να χρησιμοποιεισετε την επιλογη Uninstall blackra1n μεσα απο την εφαρμογη BlackRa1n για να την αφαιρεσετε απο το springboard.
***THANKS: A big thanks to Geohot for making this jailbreak possible. Also thanks to those who contributed to making it a success.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Ok, um, I did the whole jailbreak thing but the blackra1n app is still open and says done, wait for reboot. My iPod is on but there's no blackra1n icon yet. What's with that?
This will not work for any Idevice after the second gen iPhone but for those that want to jailbreak a ios 6.0 - 6.1.2 Idevice you can use evasi0n by the evaders. It's is really simple and it is UNTETHERED which means that if the battery dies you won't have to reboot with evasi0n
Hope it helps :)
Hi
I jailbroken my iphone 1st gen 3.1.2 using blackra1n and then used bootneuter from cydia to unlock it
Afterwards, the phone worked perfectedly until after I restored my old contacts using itunes, now my iphone is frozen with black screen, with an apple logo and a loading bar that doesnt move
iphone 3gs with 3.1.2 os i jailbroke my phone about 2 months ago (tethered jailbreak) used blackra1n rc3. my battery died and have to rerun blackra1n to reboot, i tried this but the iphone3gs stays in restore mode. when i ran blackra1n to reboot, geohotz face shows up on the phone for a couple of seconds and then phone shuts off and goes back into restore mode. i tried with windows 7,Vista and xp still no luck. i dont want to try spirit JB due to no unlock for t mobile. can anyone help me please. reply here or email me. smurvine@gmail.com thanks in advance
I have an iphone 3gs 3.1.2... i had it thetered unlocked with blackra1n but suddenly when it ran out of battery and tried to unlocked, after the tipical screen comes up it shuts down again... what is happening...can somebody tell? and what to do...please...im without cell phone and i need it a lot!!!!!! please thanks........ help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
The process works fine for me, until Step 5. My phone goes into recovery mode, but the geohot screen doesnt appear, a black screen remains. Anybody be able to help me out?
Can someonehelp, I'm really new to all this. My iPhone is the best thing since pants with pockets here, but I am not eactly sure what a jailbreak is. I mean I have a 3g 16 n the 8g do I wanna jailbreak it Att is my wireless company. What will doing this allow me to do with this phone that I can't already?? Does it not reaquiere me a carriers? Please help me! - old skool. Thanks!!!
Jailbreak, allows you to download and install unlimited free applications through cydia instead of using itunes, you can changue the initial screen on your iphone, wallpapers, anything you want to do. Jailbreak does not mean unlocked so you only can use your phone with your actual carrier, once the phone is jailbroken it can be unlocked to use it with any carrier.
Need help!
my iPhone is with 3.0 firmware and jailbroken with redsnow.
how do i upgraded it to 3.1.2 and jailbreak it with blackra1n with the provided steps above.
Thanks in advance!
Guys help me out here. I used blackra1n to jailbreak my 3GS 3.1.2 device . It was fine till I reached the springboard. The wireless was not working properly. I uninstalled blackra1n but after reinstalling it I can't get the icon anymore. I can't restore the Iphone coz the latest update is 3.1.3 and blackra1n won't work with it.
Can anyone help me?
the same thing happened to me although i also deleted cydia and i had installous and winterboard (two app things that are not deletable by just holding then pressing the cross) on my ipod as icons and u need cydia to uninstall them so i had to reinstall cydia but u cant coz this blackra1n won't reinstall!!
WE RLY NEED HELP!!
hey all i am REALLY confused and need some help here. I have purchased a brand new still sealed in the box iPhone 2G and need to unlock it for Tmobile. But ALL the unlocks I have found that work with the newer firmware (blackra1n, redsn0w) require me to update to 3.1.2 before running the jailbreak. How is it possible for me to update to 3.1.2 when I can't even activate my phone, because I am not going on AT&T! I can't find the answer to this anywhere, please help!!!! Can i just take my iPhone 2G out of its original box and use blackra1n right away? Do I start blackrain with my tmobile SIM in, or no SIM?
Hello. Thank you for posting these wonderful goodies to jailbreak iphones. here are couple of my questions. I jailbroke 2 iphones 3G and 3GS.
Both phone does have the version 3.1.2 and moderm firmware of 05.11.07
For the 3G I can no longer send MMS pics. Any suggestions?
For the 3GS i lost the Mail icon. Any suggestions?
Greatly appreciated if someone can help me..