July 19, 2024
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Posted October 13, 2011 at 4:21am by iClarified
EnglishFrenchIndonesianSpanishThai
Éstas son las instrucciones de cómo hacer jailbreak a tu iPhone 3GS con iOS 5.0 usando RedSn0w para Mac

Este procedimiento hará que se actualice el firmware del módem, pudiendo impedir el desbloqueo del terminal. Si necesitas desbloquear tu iPhone, por favor espera a que publiquemos un tutorial sobre cómo actualizar a iOS 5 utilizando un IPSW personalizado.
Este jalibreak funciona online para todos los dispositivos excepto los modelos 3GS con bootrom antiguos, los cuales deberán conectarse a un ordenador cada vez que se reinicien.

Por último, es recomendable que guardes tu SHSH Blobs siguiendo
este tutorial antes de continuar.


Si quieres hacer jalibreak en un firmware anterior, puedes encontrar el tutorial adecuado
aquí.

Paso uno
Crea una carpeta en tu escritorio llamada Pwnage

Descarga RedSn0w 0.9.9b5 desde aquí y cópialo en la carpeta Pwnage. De igual modo, descarga el firmware 5.0 desde aquí y cçopialo en la carpeta Pwnage. (Nota: no es necesario descargar el firmware si ya tienes iOS 5.0)

Descomprime el archivo zip de RedSn0w haciendo doble click en él.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso dos: (Salta al siguiente paso si ya tienes iOS 5.0 instalado)
Conecta tu iPhone al ordenador y abre iTunes.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Selecciona tu iPhone en la lista de dispositivos a la izquierda. Pulsa la tecla Opción y pincha en el botón Restaurar. Es preferible la opción de Restaurar para optimizar el espacio libre en tu iPhone.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Ve a la carpeta Pwnage en el escritorio y selecciona el ipsw del firmware 5.0. Haz click en el botón Elegir para continuar.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

iTunes actualizará entonces tu iPhone con el nuevo firmware.

Paso tres
Abre la aplicación redsn0w en la carpeta redsn0w que descomprimimos antes.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso cuatro
Una vez que RedSn0w esté abierto, haz click en el botón Jailbreak
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso cinco
Conecta tu iPhone al ordenador y asegúrate de que esté pagado. Pulsa después el botón Next
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso séis
RedSn0w te indicará los pasos a seguir para acceder al modo DFU. Puedes obener más información sobre el modo DFU aquí.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Mantén presionado el botón Home y el botón de encendido del iPhone durante 10 segundos.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Suelta el botón de encendido y continúa apretando el botón Home hasta que RedSn0w detecte el dispositivo.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso siete
Tu iPhone se reiniciará.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso ocho
RedSn0w preparará la información para el jailbreak.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso nueve
Selecciona Cydia en la lista de opciones y pulsa Next.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso diez
Tu iPhone se reiniciará de nuevo y RedSn0w comenzará a cargar la nueva RAM Disk y el Kernel.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Paso once
Una vez que se haya completado, se te notificará que RedSn0w ha concluido. Cuando tu iPhone termine de reiniciarse (5 minutos aprox.) ya tendrá hecho el jalibreak con Cydia en el SpringBoard.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]


BOOT TETHERED
Una vez que hayas hecho el jalibreak necesitarás volver a ejecutar RedSn0w para el boot tethered (NdeT: modificación del reinicio para iPhone 3GS más recientes que no reciniciarían por tener Cydia instalado).

Primer paso
Desde el menú principal de RedSn0w haz click en el botón Extras.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

Segundo paso
Selecciona Just boot del menú Extras.
Cómo hacer Jailbreak a tu iPhone 3GS usando RedSn0w (Mac) [5.0]

*Como de costumbre, muchas gracias al iPhone Dev-Team y a Geohot por su duro trabajo y su contribución a la comunidad iPhone.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (20)
You must login or register to add a comment...
liu
liu - November 19, 2011 at 2:28am
wcwcw vcd2 d
89a92b5
89a92b5 - November 1, 2011 at 4:07pm
My 3gs is bricked after doing this... cant get out of reboot cycle... restore gives error 1601... redsnow justboot hangs at waiting to reboot.... Any worthwhile suggestions?
jb
jb - October 28, 2011 at 7:16pm
I tried to jailbreak to unlock my sim card. I have a 3gs old bothom, 5.0. I CANT jailbreak'it!!!!! Each time the same issue with all the versions of jailbreaks (5, 6 and now 7): "report failed" after the manipulation dfu. I don't know what to do... HELP!! ;)
6italia0
6italia0 - October 28, 2011 at 7:50pm
you need to downgrade then to 4.1 (apple still signs the code signature for this version when saving shsh) or whatever version you know for sure you have shsh for. then you can jailbreak and flash the BB to 6.15 if needed. I will make a video of how to do this later today of how to downgrade using shsh w/6.15 installed (if you already have that installed). but really all you have to do is enter pwned dfu, restore with a stock ipsw (unless you have preserved BB then use ipsw with preserved BB), if 6.15 is installed you will get 1015, kick out of recovery with recboot.
MrTopas
MrTopas - October 29, 2011 at 2:31pm
I've got a 3GS w/5.13.04 BB on it. Just redsnowed to iOS5 with the preserved BB IPWS . Followed the tutorial steps, but now i'm unable to get Cydia (the app is not on it) so I can unlock it. Suggestions? thks
6italia0
6italia0 - November 1, 2011 at 5:59pm
Restore again we/custom 5.0 and jailbreak without specifyiong .ipsw, I found that can actually tether an untetherable device. After that just do the ifile mod for mms and your iophone will be fully working (ifile mms mod is for 6.15 BB, gevey users and factory unlocked users 5.3.4 oree higher, works with 4.x and 5.x)
6italia0
6italia0 - November 14, 2011 at 12:20pm
Meant to say 4.3.4
6italia0
6italia0 - November 16, 2011 at 4:29pm
sometimes this happens and you need to specify the ipsw, but this may also tether your jailbreak for some odd reason. I had to do this to tether boot my iphone 4 a few times because I got the same error, but now I don't need to specify the ipsw anymore, all I have to do is "just boot" tethered
Shasudi
Shasudi - October 21, 2011 at 8:26am
How to activate/hactivate iPhone 3GS with iOS 5.
6italia0
6italia0 - October 26, 2011 at 2:14pm
put any live or dead at&t sim in and setup normally? I dont think you can hacktivate 5.0 but thats why I have like 100 old at&t cards lol
jaybot
jaybot - October 19, 2011 at 7:59pm
I'm running jailbroken and unlocked 5.0 on a 3gs, and everything is running great, though find my iphone doesn't seem to be able to locate my iphone (though location services works fine in every other app). Anyone else having this issue?
Realistic
Realistic - October 16, 2011 at 7:28am
The android community is all about helping and making the newst firmware available to your phone no matter what the manufacturer says/wants. The iphone community is exactly the other way. Tethered jalibreak? Mac only? Come on. Do you how many people have macs? You guys insult (or obeys) steve jobs' smartness. By the way i'm selling my iphone 4. Just bought a galaxy s II. Thanks dev team for making my choice way easier. Hope you break (again).
6italia0
6italia0 - October 28, 2011 at 7:59pm
sorry to hear that, it must suck to have to use such a limited device. the only modification available for you is to root it to make it do only what other android devices do, but no actual mods (with an exception to astro). and so what if the dev team releases mac only software? they release the windows version usually within days and tehered isnt really that bad either (im using my iphone 4 factory unlocked 5.0 tethered), its not the worst thing in the world. But I still keep my two 3gs 32gb as backup incase I dont want to use tethered 5.0. But I guess if your ok with horrible oversize and zoomed in display and limited options then I guess thats what works for you
Connie
Connie - November 16, 2011 at 1:50am
Is that really all there is to it because that'd be falbbegrasitng.
Kruelspell
Kruelspell - October 13, 2011 at 2:19pm
Anyone can confirm this is untethered for the iPhone 3GS old bootrom?
2fix
2fix - October 15, 2011 at 6:49pm
I can confirm it is untethered. Reboots just fine. I just jailbroke my 3GS iOS5 with old Bootrom.
Kruelspell
Kruelspell - October 15, 2011 at 7:20pm
Yes it is untethered for old bootrom 3gs but when it runs out of battery restarts fine plugin it to the power cord but it starts with a yellow screen instead of the battery icon. Anyone else having this issue? Or do i have to jailbreak again? (i was in 4.3.3 jailbreak before updating)
6italia0
6italia0 - October 28, 2011 at 8:01pm
confirmed: two 3gs 32gb 5.0 05.13.04 and 06.15.00 untethered works great and no issues at all. (still, however, prefer to use my factory unlocked iphone 4 5.0 tethered though).
Marel
Marel - November 14, 2011 at 1:52am
I think you hit a bulsleye there fellas!
rynbin
rynbin - June 10, 2011 at 2:46pm
I wonder what people are saying about this or if they are getting it to work...
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS