July 13, 2024

Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Posted June 20, 2009 at 9:46am by iClarified
EnglishFinnishGerman
Tässä on iPod Touch jailbrekkaamisohjeet Macille. Samankaltaiset ohjeet löytyvät Windowsille tästä

Vaihe 1
Tee työpöydällesi kansio nimeltään Pwnage

Lataa RedSn0w- ohjelman torrent tiedosto tästä ja avaa tiedosto ohjelmalla Transmission. Sen voit ladata tästä. Kun olet avannut lataamasi torrent tiedoston Transmissionilla, ohjelma pyytää sinua tallentamaan tiedoston johonkin. Etsi sieltä tekemäsi "Pwnage" kansio ja tallenna sinne. Kun tiedosto on latautunut, sulje Transmission.


Seuraavaksi, lataa uusin iPhone OS 3.0 ohjelmisto ja sijoita se Pwnage kansioon.

HUOMAUTUS*: iPod touch 3.0 täytyy ostaa ensin iTunesista. iTunes tallentaa ohjelmistotiedostot tänne:
~/Library/iTunes/iPod Software Updates/iPod2,1_3.0_7A341_Restore.ipsw
~/Library/iTunes/iPod Software Updates/iPod1,1_3.0_7A341_Restore.ipsw

Pura redsn0w ohjelma RedSn0w zip- tiedostosta Pwnage kansioon:
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 2
Liitä iPodisi tietokoneeseen ja avaa iTunes.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Valitse iPodisi "Laitteet"- listasta. Nyt, midä pohjassa Option- näppäintä ja klikkaa Palauta painiketta. Ennen tätä, varmista, että iPodin sisältö on turvallisesti tietokoneella, sillä kaikki tiedot pyyhkiytyvät.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Eteesi avautuu lista. Navigoi Pwnage kansioon työpöydälläsi ja valitse sinne siirtämäsi iPhone OS ipsw tiedosto. Klikkaa Avaa painiketta.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 3
Kun iTunes on vihdoin palauttanut iPodisi, mene Pwnage kansioon ja avaa redsnw0w.app.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 4
Kun RedSn0w avautuu, klikkaa Browse painiketta.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 5
Valitse pwnage kansioon siirtämäsi ipsw tiedosto ja klikkaa Open
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 6
Kun ohjelmisto on "tarkastettu", klikkaa Next painiketta jatkaaksesi.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 7
Varmista, että Cydia on valittu ja klikkaa Next painiketta.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 8
Yhdistä iPod Touch tietokoneeseen ja kytke siitä virta pois jonka jälkeen klikkaa Next painiketta.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 9
RedSn0w opastaa nyt sinua iPodin laittamisessa DFU tilaan. Jos haluat, voit etsiä lisää tietoa DFU tilasta tästä
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Pidä koti- ja virtapainikkeitapohjassa 10 sekuntia.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vapauta virtapainike ja jatka koti painikkeen pitämistä pohjassa, kunnes RedSn0w tunnistaa iPodisi. (Älä purista liikaa tai ipodisi saattaa puraista sinua)
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 10
iPodisi käynnistyy nyt uudestaan.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 11
RedSn0w nyt siirtää iPodiisi tarvittavaa RAM Levyä..
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)

Vaihe 11
Hetken kuluttua kaiken pitäisi olla valmista. Klikkaa Finish painiketta.

iPodisi käynnistyy uudestaan (5 minuuttia tai vähemmän). Tämän jälkeen iPodisi on vihdoin jailbrekattu ja Cydia on ilmestynyt kotinäytöllesi.
Kuinka Jailbrekata iPod Touch ohjelmistoversiolla 3.0 käyttäen RedSn0w:ia (Mac)
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (25)
You must login or register to add a comment...
halyfax
halyfax - February 2, 2010 at 8:03am
I installed Winterboard, clicked reboot and the ipod 1gen is stuck at the pineapple logo. After about 20 secs it just goes black
ddre
ddre - September 18, 2009 at 9:34am
Why is it that when i download the redsnow file on my mac, it downloads as a zip file and i never had that trouble because i have a program that opens zip files stuffit
Drizzy
Drizzy - September 12, 2009 at 10:57pm
its not working for me. It crashes when the window connecting to server pops up what should I do
Dev
Dev - August 19, 2009 at 3:28pm
Thaaaaaaank you! No one was clearifying step one and two when you have to use YOUR OWN ipsw. Thanks
nightfall
nightfall - August 15, 2009 at 10:37am
Ok.. this is somewhat of an update to this tutorial. I used RedSn0w 0.8 to jailbreak my 2G iPod Touch on a MAC. Firstly, you will need to upgrade your device's OS to version 3. You can download this for your device. Google and Softpedia is your friend. Use that firmware that I had just mentioned above for the steps mentioned in the tutorial. When entering in DFU mode and RedSn0W says waiting for reboot, what I did was to unplug my USB cable from the computer momentarily and inserted it back. That caused the device to continue with the jailbreak process. Another note worthy thing is that you need to used APPLESYNC 3.0 and not MIPATCH for a device that has been upgraded to 3.0. It will cause the device to hang on boot.
JCS
JCS - August 23, 2009 at 6:13pm
If it wasn't for the unplug/replug, I'd be waiting forever.... I tried this about a dozen times, with a bunch of different tutorials (all telling me the SAME THING) until I found this comment!! It's now actually DOING something!
alanis_junkie
alanis_junkie - August 26, 2009 at 7:19pm
this really saved my day..been doing this since last night and i found nothing that helped me..the unplu/plug thing really works...THANKS A LOT! you made someone really happy today :D
grinline.com
grinline.com - November 6, 2009 at 2:45pm
This NEEDS to be added to the tut. Absolutely saved the day on my 2G pod. Please get this added...it works!
jed
jed - August 10, 2009 at 10:46pm
this worked amazing!!
jim
jim - August 10, 2009 at 6:37pm
is this jail break untethered?
Apes
Apes - August 5, 2009 at 2:25pm
can you use redsn0w 0.7.2 with this?
JJ
JJ - August 5, 2009 at 11:57am
Can't this brick ur iTouch?
barbara
barbara - August 4, 2009 at 3:13am
I thought the jailbreak failed as the iPod touch 2.0 didn't reboot automatically and Cydia didn't appear on the home page, but it was there all along on the page to the right on the home page. Check there!
Spliffy
Spliffy - August 1, 2009 at 2:41pm
attempting 2G 3.0 JB on 10.6 ----------- I get no response after DFU. (No progress indicator change) Just hangs? Red recognizes the device (I assume, as it makes it passed dfu check) but hangs up soon after. I've tried using VM (parallels/XP) but nothing. any workarounds or other solutions besides red? (I'm not a touch guy, but I do have experience with the phone) cheers-
spliffy
spliffy - August 1, 2009 at 2:43pm
clarification:--------> in VM: ... Red is not recognizing the device.<-------- thanks
AK
AK - July 22, 2009 at 9:33am
mi ipod is not responding at all after the redsnow finished. I'm doing the DFU stage over again but nothing happens!! Please HELP!!!!
rene
rene - June 28, 2009 at 5:09pm
if i don't have already purchased the OS3 from Itunes store it won't work?
cohen-the-barbarian
cohen-the-barbarian - June 26, 2009 at 11:55pm
thank you , thank you , thank you !!!
zenb
zenb - June 26, 2009 at 1:21am
you need to look further in this website (iphone hack section) and install ultrasn0w via cydia in order for you to access different carriers.
Anonomous
Anonomous - June 21, 2009 at 4:30pm
????i jailbroke and it said done then it reloaded on ipod but now ipod wont turn on
anonymous
anonymous - July 4, 2009 at 1:31am
Same thing with me. What is confusing is that the tutorial doesnt mention anything of what the iPod itself states ( for instance: installing binaries). Is there anyway of getting my pod working again? iTunes does not recognize it. Pressing start doesn't help, neither does Start and Home button. All black and dead.... help!
Jim
Jim - June 21, 2009 at 12:42am
In step two: hold down shift and click the Restore button should be replaced with: hold down option and click the Restore button
Andrei Pavlov
Andrei Pavlov - June 20, 2009 at 12:51pm
I have jailbroaken my iPhone, but it cannot find any network! What should I do?
Sayam
Sayam - June 20, 2009 at 12:06pm
I guess doesn't work with my GM seed as it gives me unable to recognize error.
nightfall
nightfall - August 15, 2009 at 10:35am
Ok.. this is somewhat of an update to this tutorial. I used RedSn0w 0.8 to jailbreak my 2G iPod Touch on a MAC. Firstly, you will need to upgrade your device's OS to version 3. You can download this for your device. Google and Softpedia is your friend. Use that firmware that I had just mentioned above for the steps mentioned in the tutorial. When entering in DFU mode and RedSn0W says waiting for reboot, what I did was to unplug my USB cable from the computer momentarily and inserted it back. That caused the device to continue with the jailbreak process. Another note worthy thing is that you need to used APPLESYNC 3.0 and not MIPATCH for a device that has been upgraded to 3.0. It will cause the device to hang on boot. Have fun.
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS