Ako odomknúť (jailbreak) iPhone 3G na OS 3.1 pomocou PwnageTool pre Mac
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted February 14, 2010 at 11:52pm by iClarified
Ukáeme vám ako odomknete svoj iPhone 3G vytvorením vlastného ipsw, ktorý môe automaticky jailbreaknúť, naintalovať aplikácie a pridať svoje vlastné bootovacie obrazovky.
Aby ste sa naučili pouívať PwnageTool na odblokovanie (unlock) a jailbreak (odomknutie) svojho iPhone 2G, musíte pouiť tento návod.
Prvý krok Vytvorte zloku s menom "Pwnage" na ploche. Do nej musíte umiestniť niekoľko vecí. PwnageTool 3.1 stiahnuť z h4ck.org.il alebo z torrentu.
Na stiahnutie súboru IPSW je lepie pouiť Firefox, pretoe Safari ho môe automaticky rozbaliť (čo je chyba)!
Druhý krok Dvojklikom namountujte PwnageTool 3.1 a potom premiestnite ikonu PwnageTool do zloky Pwnage.
Potom zo zloky Pwnage dvojklikom spustite aplikáciu PwnageTool.
Kliknite Ok ak sa zobrazí varovanie.
Tretí krok Kliknutím vyberte Expert Mode z horného riadka menu
tvrtý krok Kliknutím si vyberte svoj iPhone. Značka zakrtnutia sa zobrazí cez obrázok telefónu.
Piaty krok Kliknite na tlačítko s modrou ípkou. Zobrazí sa stránka "Browse for IPSW". Na mojom laptope sa automaticky naiel IPSW. Ak PwnageTool nevie nájst súbor ipsw, kliknite na Browse for IPSW....
Kliknite na nájdený súbor IPSW a zobrazí sa na ňom značka zakrtnutia. Potom kliknite na tlačítko s modrou ípkou.
iesty krok Teraz si vyberte z menu so siedmymi monosťami. Kliknite na General a potom kliknite na tlačítko s modrou ípkou.
Nastavenia v General umoňuje nastaviť veľkosť partície. Zakrtnite Activate the phone ak nemáte v telefóne oficiálnu SIM (kúpenú s telefónom) a telefón bude zároveň aktivovaný. Potom kliknite na tlačítko s modrou ípkou.
POZNÁMKA*: Nezakrtávajte Activate ak máte telefón legitímne aktivovaný s oficiálnou SIM. POZNÁMKA*: Mono budete potrebovať väčiu root partíciu. Môj prvý pokus zlyhal pri vytváraní IPSW a kým som ju nezväčil na pribline 695 MB.
Nastavenia Bootneuter sú edým písmom pre telefón iPhone 3G. Kliknite tlačítko s modrou ípkou.
Nastavenia Cydia umoňuje zahrnúť voliteľné balíčky a tak ich nemusíte neskôr intalovať.
Kliknite na záloku Download packages. Potom kliknite na tlačítko Refresh aby sa zobrazili vetky dostupné balíčky. Dvojitý klik na balíček zahrnie balíček do záloky Select Packages.
Zakrtnite, ktoré chcete a potom kliknite na tlačítko s modrou ípkou.
V menu Custom Packages Settings zobrazila zoznam balíčkov pre Vá vlastný IPSW. Môete tieto nastavenia nechať tak ako sú. Kliknite na tlačítko s modrou ípkou.
Menu Custom Logos Settings umoňuje pridať vlastné obrázky ako bootovacie logá. Kliknite na Browse a vyberte si svoje Boot logo a Recovery logo. Ak sa vám páčia niektoré z iClarified, môete si vybrať: Boot Logo, Recovery Logo
Zapamätajte si pravidlá pre tieto obrázky: RGB alebo odtiene edej s alfakanálom a rozmermi: 320x480...
Kliknite na tlačítko s modrou ípkou.
Siedmy krok Teraz ste pripravení na započanie procesu pwnage! Kliknite na tlačítko Build a potom kliknite na tlačítko s modrou ípkou.
ôsmy krok Teraz ideme ukladať teraz pripravený vlastný .ipsw súbor. Ulote ho do zloky Pwnage na ploche.
Vá IPSW sa bude ukladať pribline 10 minút.
Budete vyzvaní k vloeniu hesla administrátora. Urobte to a kliknite na tlačítko OK
Pri výzve či u bol vá telefón predtým Pwnutý, kliknite No. To umoní hlbiu úroveň obnovy (restore).
Potom budete poiadaní na vypnutie váho iPhone. Uistite sa, e je pripojený USB káblom k počítaču.
Deviaty krok Buďte pripravení nasledovať intrukcie. Budete vyzvaní pridrať home tlačítko a vypínacie tlačítko na 10 sekúnd. Potom musíte uvoľniť vypínacie tlačítko a naďalej dríte home tlačítko počas 10 sekúnd čím sa telefón dostane do DFU.
Pokiaľ zlyháte, zobrazí sa správa. Kliknite na Yes, odpojte telefón z USB. Vypnite ho a začneme odznova. Pripojte ho späť cez USB kábel a vypnite iPhone, keď budete vyzvaní.
Keď sa vetko korektne dokončí, PwnageTool zobrazí správu informujúcu, e ste úspene v DFU móde. iTunes môe zobraziť pop-up správu.
Desiaty krok V iTunes stlačte a drte kláves Alt/Option a kliknite na Restore.
Jedenásty krok Prejdite do zloky Pwnage na vaej ploche pouitím zobrazeného dialógového okna. Vyberte Vami vytvorený vlastný "custom" IPSW, ktorý ste pred chvíľou vytvorili (iPhone1,2_3.1_7C144_Custom_Restore.ipsw) a kliknite na tlačítko Open.
Dvanásty krok iTunes teraz obnovuje firmware váho iPhone. Môe to trvať desať minút.
Pokiaľ chcete, môete obnoviť z predolej zálohy svojho telefónu vetky svoje nastavenia, dáta a programy alebo (odporúčame) ponechať svoj iPhone tak, ako je.
Trinásty krok Po nahratí firmware sa telefón ete musí rebootnuť a potom uvidíte Cydia na svojom Springboarde!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Many thanks for the precise tutorial. Worked flawlessly for me and I have android successfully working on my iPhone 3g which has 3.1.3. However, I am unable to get data working in android. Can someone help please? Should I setup an APN manually?
I've one this process with ease with my iPhone 2G. I'm now trying doing the same with my iPhone 3G. All is fine apart from the DFU mode. I have tried times and times again, leaving it a little less than 10 sec, leaving a little more than 10 sec, right on the dot on 10 sec... Not having any luck.
I have tuned the device off, disconnected, turn back on again, wait, and connect again between each time.
Anybody can help?
Thanks
I get PwnageTool_3.1.5.dmg.5344262.TPB.torrent instead of PwnageTool_3.1.5.dmg and when I double click it it asks me to choose an application to open it. And I'm stucked. I tried to rename the folder by deleting it's last part but it's not working. Please help !!!!
I did the JB on a 3G with a custom restore file on 4.2.1 on a BB 6.15.00. Worked flawlessly BUT when i wanted to unlock Cydia crashed. I can not unlock without Cydia!!!! What should i do? can somebody help me ? Thanks in advance
Laurent
Hi .. Followed the instructions prslieecy and I successfully Jail Break and updates IOS to 4.3.3 [ custom firmware ]Now strangely the legit sim stop working ans when I ve used ultrasnow it stays in searching and then display no signalAt present it is at 4.3.3 /05.14.02 help required as I cannot use my phone with its legit simI have repeated the process three four time also rest network setting , rebooting nothing works
I bought an unlocked phone in Hong Kong. At that point it was 3.1.3, I made the fatal mistake of trying to upgrade it to OS4. Now all I get is the emergency restore icon. I followed the steps with pwnagetool but I get a 1600 error when i try to restore it. Is there something Im doing wrong? I noticed that the pwnagetool doesnt have a 3G so I picked the 3G(S) one, is that correct? Will this process even help me with my problem?
Please advise. Thank you!
hello everybody, i have an iphone 3gs FW 3.1.3 and it is stuck on the emergency screen message!!!!!! Can pwnage tool 3.1.5 Activate it ??? Or there is no way yet to hactivate iphone 3gs on 3.1.3 ?? thanks in advance
i did the jailbreak according tp the tutorial but am stuck now at not having a network. i did twice once with the activate your phone option checked and once without.
Can anyone help me with the unlocking part... Funny thing thing is prior to this round i have never had the problem of unlocking the phone because it is a unlocked phone when it was purchased...
Please help
Thanks
on jb iphone i had no wifi signal... I upgraded to 3.1.3 with itunes :( and it's dead now! I can turn it on but cannot activate it event with an ATT card (phone not bought here in US)... I tried the pwnage steps but it stops at where it says connects w USB and nothing happens... please help... m
OK Sorry if this a rookie question but I need some help. I downloaded the pwnage tools but it asks what to open it with. WHat do I do, it does not show the disk image (mac) so I am not sure hot to open this file. The restore file i downloaded seems to be recognized, any help would be appreciated. Thanks
It's the third time that I try to jailbreak my iPhone 3G 3.1.3 with Pwnage Tool 3.1.5.
I am following iClarified manuel indications and everything is going just as well as indicate till the iPhone reboot.
Then I am only able to use it as an iPod ! The reception signal became flat, and I can't make or receive call anymore, same with messages.
General information indicate there is no operator.
The same simCard still working with an other cellphone.
I am using an indonesian operator ProXL.
What going wrong ?
Is your carrier authorized by Apple??... remember that this tutorial is only for jailbreak... If you don't have any signal or carrier recognized maybe it's because you haven't installed the software unlock.....
Follow the unlock tutorials
My phone is unlock. At least I believe it, it's why the guy from the shop where I bought it told me.
I bought it in Italy and use it in Indonesia with a different provider.
What strange anyway is that UNLOCK tutorial says "Before you can follow these instructions you must have a jailbroken iPhone" !!!!
How could many people and I, have an unlock iPhone not Jailbroken then !
dude ur talking about activation, your iphone is activated and jailbroken but not unlocked
to unlock it go to cydia>search>ultrasn0w...and install it :)
Its gonna unlock ur iphone to any baseband
I'm having the same problem and thanks for the response Ahmad. I didn't install any of the cydia files the first time. Which ones do I install to do this? I don't have cydia on my phone right now.
iphone 3g
3.1.3(7E18)
05.12.01
every time i try to run pwnage tool, i get to the browse for ipsw, select the 'iPhone1,2_3.1.3_7E18_Restore.ipsw' file and get a "wrong firmware bundle selected" message
what am i doing wrong?
I keep getting the message "wrong firmware bundle selected" I have and iphone 3G it's running 3.1.3 and i'm using iPhone1,2_3.1.3_7E18_Restore.ipsw to jailbreak. but i keep getting that messege. I see that some people have said to use the custom version, but i don't understand that and i don't know where to get that. please help.
You are probably doing what I did, which was to choose the image on the left of 'iPhone' rather than 'iPhone 3Gs'. I know that you have a 3G, but the 3GS covers both.
Every thing ok but when installing firmware with iTune, I get an error (2600 or similar), do I need to use a particular version of iTunes? (got 9.0.3) or is there any possibility that the bootloaders I get on the net are corrupted (the one on the tutorial is not available from here) Thanks.