Πως να κάνετε Jailbreak στο Iphone 3G 2.x.x χρησιμοποιώντας το Quickpwn
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted February 3, 2009 at 11:40pm by iClarified
Αυτές είναι οι οδηγίες για το πως θα κάνετε jailbreak στο Iphone 3G στο firmware 2.1-2.2.1 χρησιμποιώντας το QuickPwn για χρήστες Windows.
Αν σκοπεύετε να ξεκλειδώσετε το iPhone μπορείτε να χρησιμοποιησετε αυτό το tutorial ΜΟΝΟ αν είστε στην έκδοση 02.28 modem firmware (baseband) ή χαμηλότερη και κάνετε restore στην έκδοση 2.2 (ΟΥΧΙ στην 2.2.1).Σε αυτό το tutorial για την έκδοση 2.2.1 υπάρχει προς το παρόν διαθέσιμο ΜΟΝΟ το jailbreak και οχι το ξεκλειδωμα.Για να μάθετε την έκδοση του modem firmware (baseband) καντε κλικ εδώ
Βήμα πρώτο Φτιάξτε ένα φάκελο με το όνομα Pwnage[/] στην επιφάνεια εργασίας.
Κατεβάστε τα ακόλουθα αρχεία και βάλτε τα στον φάκελο Pwnage που μόλις φτιάξατε : -QuickPwn-225-2.zip
Αποσυμπιέστε το Quickpwn-225-2.zip στο φάκελο Pwnage.
Βημα Δευτερο Συνδέστε το iPhone με το pc και ανοίξτε το iTunes.
Πατήστε το iPhone από την λίστα με τις συσκευές στα αριστερά.Πατήστε shift και ταυτοχρονα κάντε κλικ στο κουμπί Restore.Είναι προτιμότερο το iPhone να βρίσκετε σε κατάσταση Restore ώστε να μην δημιουργηθέι άχρηστος χώρος στο τηλέφωνο σας.
Πλοηγηθείτε στον φάκελο Pwnage στην επιφανεια εργασίας και διαλέξτε το firmware ipsw.Πατήστε το Open .
Bήμα Τρίτο Μόλις το iTunes τελείωσει με την αναβάθμιση του iPhone στο επιλεγμένο firmware ξεκινήστε την λειτουργία QuickPwn.exe μέσα από τον φάκελο Pwnage στην επιφάνεια εργασίας σας.
Βήμα Τέταρτο Βεβαιωθείτε ότι το iPhone είναι συνδεδεμένο στον υπολογιστή και πατήστε το μπλέ βέλος για να συνεχίσετε.
Βήμα Πέμπτο Πατήστε το Browse για να βρείτε το firmware .
Βήμα Εκτο Διαλέξτε το firmware ipsw από τον φάκελο Pwnage στην επιφάνεια εργασίας και μετά πατήστε το Open .
Βήμα Έβδομο Το QuickPwn θα τσεκάρει ότι χρησιμοποιείτε το σωστό ipsw. Πατήστε το μπλέ βέλος για να συνεχίσετε.
Βήμα Όγδοο Τώρα μπορείτε να επιλέξετε αν θα προσθέσετε το Cydia , το Installer ή αν θα αλλάξετε τις εικόνες εκκίνησης (Boot Logos).Μόλις επιλέξετε αυτά που θέλετε πατήστε το βελάκι.
Βήμα Ένατο Το Quickpwn θα σας ζητήσει να σιγουρευτείτε ότι το iPhone είναι συνδεδεμένο με το USB πρίν συνεχίσετε.Πατήστε το μπλε βελάκι για να συνεχίσετε.
Βήμα Δέκατο To Quickpwn τώρα αυτόματα θα βάλει το Iphone σε κατάσταση Recovery.Μόλις μπεί σε recovery mode θα σας προτρέψει να κάνετε τα εξής ακόλουθα βήματα: Κρατήστε το κουμπί Home πατημένο για 5 δευτερόλεπτα , Πατήστε το Home και το κουμπί Power ταυτοχρόνως για 10 δευτερόλεπτα,μετά αφήστε τo Power και συνεχιστε να πιέζετε το Home μέχρι το iPhone να μπει σε κατασταση DFU.
Κοιτάχτε τις εντολές και ακολουθήστε ταυτοχρόνως.
Βήμα Ενδέκατο Μόλις το QuickPwn εντοπίσει ότι το κινητο σας έχει εισέλθει σε κατάσταση DFU θα ξεκινήσει την διαδικασία του jailbreak.
Βήμα Δωδέκατο Μόλις τελειώσει το jailbreak το QuickPwn θα σας ενημερώσει ότι πέτυχε η διαδικασία.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
I got through all the steps, now I'm waiting for my iPhone to reboot and nothing ! It's keeps buzzin like it's going to turn on but it doesn't and itunes doesn't show that my iPhone is connected ! Can somebody post what to do now?
Can I use this method to jailbreak an otb iphone 3g thereby also activating it? Or is there another procedure to follow to activate it first. Kindly help.
everything was ok untill the third step man it came out a pop out when i click to launch quickpwn it says an error had cause the program to stop runing WTF?
BTWW i am running on vista 32bit system help me man
I get to the QuickPwn step where it says 'wait for your phone to connect in Recovery Mode'... but nothing happens...it wont connect??? Anyone got any ideas? It connects OK through I tunes and I can get this far on the jailbreak. Am I doing anything wrong?
I succesfully jailbreaked my iphone 3g with firmware 2.2.1. and it works great. I had slight problems with ipsw file. After some delay I removed zip extension and I was able to find ipsw file when QuickPwn asked me to browse for 2.2.1 firmware. Go to Start, Control panel, Folder Options, View, Hide extensions for known file type and then rename folder and remove zip extension. I hope this helps. Bye
Currious, I have been using ym Iphone since august 08, if I do this restoral for the jailbreak will it wipe all my contacts and everything? if it does is there anyway to merge the two restores, my original one with the jailbroken version?
When I get to the `Browse for ipsw` step, I put in the file, 2.2.1, and it should be working, but the blue arrow wont load, and so I cant carry on with the jailbreaking. Nor can I see the iPod that should be on the left hand side. (the one that gets a check mark). Help please?
I am having exactly the same issue. Browse for the firmware and says that quickpawn does not update firmware. It seems the firmware has an extra "2_" at the star tof the file name or something. Please help !!!
if you want to unlocke your phone by useing yellowsnow do not upgrade to 2.2.1. you do custom restore to 2.2.0. I just did my.I have the same firmware.
Hi,
I followed the instructions. In the middle of first steps (restore with itunes) i get error (9) can't restore. What can I do? if I restore it will put the newest version, which is not jailbroken and i will not be able to jailbreak it... how do I restore to exactly what I had before trying?
thanks!
My i-ph 16Gb 2.2.1(5H11)froze before I got to Step3...!
Screen has as a pic of a USB plug and an arrow pointing it at the iTunes logo which has a little picyure of a lock just above it...
I restored my iphone using iPhone1,2_2.2_5G77_Restore.ipsw & quickpwn. Everything worked, except that i dont have service.
Can someone help me please? ( flex60mph@aim.com )