October 12, 2024
RedSn0w Jailbreak Funcionará Para o iPhone OS 3.0.1

RedSn0w Jailbreak Funcionará Para o iPhone OS 3.0.1

Posted August 1, 2009 at 1:33am by iClarified
EnglishDutchIndonesianItalianPortuguese (Brazil)Vietnamese
O iPhone Dev-Team confirmou que é seguro fazer o jailbreak do iPhone OS 3.0.1 com a versão atual do RedSn0w

Você pode re-utilizar redsn0w v0.8 que disponibilizamos algumas semanas atrás para fazer o jailbreak da atualização 3.0.1 de hoje. Apenas deixe o iTunes fazer o update ou restore para você para o 3.0.1 oficial e então rode o redsn0w. O único "truque" é que, quando redsn0w pedir para que você identifique o IPSW utilizado, aponte para o IPSW 3.0 ao invés do 3.0.1. Após o jailbreak, reinstale o ultrasn0w 0.9 se você precisar desbloquear.

A atualização do iPhone OS 3.0.1 foi disponibilizada pela Apple apenas para fixar uma falha no SMS que permite que hackers tomem controle do seu iPhone. Ela não é funcionalmente diferente.


Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (89)
You must login or register to add a comment...
Pat
Pat - November 18, 2009 at 11:25am
Hello, I just have this 2G iPhone which is jail break and still runing on 1.1.1. Can I upgrade straight ahead to 3.0.1? Will there be any issues? Could you suggest some ways to do it? Thanks in advance :-)
Chris
Chris - September 7, 2009 at 3:16pm
I have a question. I was wondering if I upgrade my already jailbroken 3gs from 3.0 to 3.0.1. Will it affect my phone? Will I have to re jailbreak it?
Tara
Tara - September 7, 2009 at 5:12pm
I had the same question. Then, I ventured and updated. The jailbreak remailed intact but I had to re-unlock my phone (the procedure of unlock i remains the same as recommended by Dave. Please post a message again after you try.
Steve
Steve - August 30, 2009 at 12:48pm
Hi. I just jail broke my 3GS and everything seems to be good except I don't have cell phone or 3G signal. I won't pick up a carrier or make calls. Am I missing something. I am new to this and I'm not sure if I missed something I was suppose to do. PLEASE HELP!
Alexander
Alexander - August 13, 2009 at 11:10am
I can't find redsnow v.8. I have a 2G phone with T-Mobile Unlocked and JB on 3.0. I would like to go to 3.0.1. Am I able to use iTunes Version 8.2.1 to upgrade and the use the instructions given for Redsnow using version .7??????????? Please help.
Elliott
Elliott - August 10, 2009 at 5:23pm
Hi, Im Confused!! I Have A 2G Iphone and have now updated to the OS 3.0.1 and have lost my Cydia and other updates!! do i need 2 download the 3.0.1 IPSW from this website? or can i just use the 3.0 IPSW as i did before? Pease Help!
kenny
kenny - August 10, 2009 at 8:53pm
what you need to do is download 3.0 and redsnow. open redsnow and tell it that you to look for 3.0 . That my friend will load cydia again. Kenny.
Kenny
Kenny - August 9, 2009 at 11:35pm
Wow, that does really work. Install cydia was a breeze. Thanks guys.
corylund
corylund - August 7, 2009 at 12:42pm
I have a problem. My 3G phone was jailbroken on 3.0, and I updated to 3.0.1. But, I had apps in the Categories folders before doing so (mistake). I jailbroke again, and now, these apps are not in the home screen anywhere, even after restoring. It appears that they are on my phone, but somehow I cannot see them anywhere. This is extremely important, because among these apps was settings and others that are obviously crucial to the phone operation. Also, the battery percentage is still next to the battery. So, there are signs of the previous jailbreak even after restore, but now I can't access any apps. Any help would be GREATLY appreciated.
Zeljko
Zeljko - August 9, 2009 at 4:50am
I thouht that I was the only one with that problem. I hope that we can resolve that somehow.....
Zeljko
Zeljko - August 9, 2009 at 6:06am
.....and now I know exactly how :)))) As first thing you must have program categories. Then you must erase everything what you have in categories and make everything like it is the new one. And then you make new categories and just add programs you already have in your Iphone and you will see it will work. :) Have a nice day
Diego Quintero
Diego Quintero - September 3, 2009 at 10:06am
ok, but i can't instal categories again, it just desappear, even if i reinstalled, it don't show any where
JOsU323
JOsU323 - August 5, 2009 at 9:53pm
the questions is, if after jailbreaking using 3.0 ips the bug fixes will still be in effect? Cause thats the whole reason why I upgraded to 3.0.1
Merlin76
Merlin76 - August 4, 2009 at 10:54am
Does anyone know about the information disclosed in Cydia that Saurik is working on a tool to upgrade without running the JB process again? He asks to give him a week for news....any comment on that one? Cheers.
MrBlur
MrBlur - August 4, 2009 at 4:24am
Hi guys, I just upgrade my 3g to 3.0.1. everything just fine except my wifi. is there any solution? I hv compared the wifi service with my 3gs. my 3gs work fine but not the 3g. any idea? Thanx fella!
Lucia
Lucia - August 3, 2009 at 2:05am
Hi there! I have updated my iPhone to 3.01 firmware and am trying to jailbreak it using redSnow for 3.0. Only problem is it does not recognise the IPSW firmware when I go to shift restore or when I use the redSnow.exe. What do I do now? I have done this a few times and its always the same problem, there is an error with the IPSW. It says to pick the 3.0 IPSW but it doesnt recognise it. Thanks in advance!
Lucia
Lucia - August 3, 2009 at 2:18am
BTW I have just the 3G iPhone
djdrool91
djdrool91 - August 3, 2009 at 4:38am
try connecting your phone to itunes and when its in put it in dfu mode and restore it and let itunes do the update for 3.0.1 then re-download redSnow again (maybe the file has an error) then try again and make sure you click the correct ipsw tell me how it goes i did it without a problem works fine
djdrool91
djdrool91 - August 3, 2009 at 4:38am
try connecting your phone to itunes and when its in put it in dfu mode and restore it and let itunes do the update for 3.0.1 then re-download redSnow again (maybe the file has an error) then try again and make sure you click the correct ipsw tell me how it goes i did it without a problem works fine =]
edaddy
edaddy - August 3, 2009 at 9:39am
do exactly what RedSnow is prompting you to do. install the update to 3.0.1 through ituens (make sure you back up your Cydia apps first) Download the IPSW (you should still have it if you upgraded to 3.0 and are jail broken) If you get hung up during the rebooting phase in RedSnow unplug your cable and plug into another USB port... then it should reboot. and enjoy being JailBroken
Merlin76
Merlin76 - August 4, 2009 at 10:53am
Have you tried donwloading the file with Firefox? Because I've seen in different posts that Safari decompresses it so you don't get the file you should be getting...if not check the tutorial in this site to download the one you need again.
omarelramly
omarelramly - August 3, 2009 at 12:17am
Help plz, it stays at waiting for reboot and nothing happens i tried to restore my iphone 3G again but have the same prob. what can i do!!!?
djdrool91
djdrool91 - August 3, 2009 at 4:39am
retry to do everything again and make sure its all correct...sometimes it just takes awhile to boot
omarelramly
omarelramly - August 3, 2009 at 4:54am
i've retried more than 5 times but the same prob i left it at waiting for reboot for more then 5 hours but nothing happens tried evrything, there is something wrong !!!
djdrool91
djdrool91 - August 3, 2009 at 5:00am
make sure you updated itunes and you have the correct ipsw...plug it in and turn on itunes and put it in DFU mode restore it and let itunes do the update after that jailbreak and unlock it...if that fails try to do it on another computer maybe?...if that still dont work then i'm sorrry i dont know anymore...but give it a try but make sure all the programs are correct i did it and it works fine
omarelramly
omarelramly - August 3, 2009 at 5:26am
THX Man, i appretiate your help tring a new comuter didnt ran on my mind i just downloaded the redsnow for windows and JB there and it worked thx man for your help
dj_drool91
dj_drool91 - August 3, 2009 at 6:20am
haha np man glad i could help =]
Ricekake
Ricekake - August 2, 2009 at 7:57pm
No offense, but mine says 3.0.1 (7A400). Might wanna do it again
djdrool91
djdrool91 - August 3, 2009 at 4:35am
yea same you mihgt wanna redo it mine says 3.0.1 also
MrBlur
MrBlur - August 4, 2009 at 4:30am
Mine too.. I think you need to redo it once more
Tara
Tara - August 10, 2009 at 1:24pm
I repeated 5 times. I went to Settings/General/About and check Version. Always I found that it is Version 3.0 (7A341) instead Version 3.0.1 (7A341). I first restored the phone 3GS using itunes FW 3.0.1. I checked and found that final version was 3.0.1. Then I restored using Dev Team Redsn0w, the version was 3.0 (I guess it was supposed to be 3.0 version because I am restoring with 3.0 version software). Please tell me how it will be 3.0.1 (when we are restoring using Dev Team's iPhone2,1_3.0_7A341_Restore, this is based on FW3.0)
dazednconfused
dazednconfused - August 2, 2009 at 2:00pm
HELP!! Tried to JB got stuck at waiting to reboot screen in redsn0w. Now I can't restore in itunes. Phone is unresponsive. What should I do?
djdrool91
djdrool91 - August 3, 2009 at 4:41am
try this plug in your phone and have itunes open...then put the phone into DFU mode a restore button should show and you could restore it...after let itunes update it and do the jailbreak after...try that tell me if it works =]
omarelramly
omarelramly - August 3, 2009 at 5:30am
hey we found a solution just as u r go to a xp and install redsnow and pick the 3.0 ipsw and it will JB If God Wills tell me if it worked =]
John
John - August 3, 2009 at 1:15pm
Hey!, Just unplug your Iphone and plug it in again.. worked for me
JOJO
JOJO - August 11, 2009 at 11:31am
@ DAZEDNCONFUSED okay my phone was stuck on waiting to reboot too and i thought that it wasnt turning on...but try holding the power and home button at the same time for about 30 seconds...and that should turn it on...tell me if that works...but still have the same problem with the jailbreak and waiting to reboot...if anyone can help with that thanks
dazednconfused
dazednconfused - August 2, 2009 at 1:38pm
Tried downloading it with Firefox instead of Safari. Worked like a charm no need to unzip.
omarelramly
omarelramly - August 3, 2009 at 12:14am
i have the same problem it stays saying waiting for reboot and nothing after that any help plz
ricekake
ricekake - August 2, 2009 at 1:16pm
Well, I waited to get the go ahead from the dev team and well, I just restored to 3.01 ( wondering if there really is this big threat) and then jailbreaked to redsnow and all went smooth. Guys, remember to use apt back up from cydia to save yourself a days worth of putting all your apps back on. Again we thank you for all your hardwork
Merlin76
Merlin76 - August 2, 2009 at 7:06pm
Try downloading it with Firefox instead of Safari to get the "untouched" file.
aka SPIRITLEVEL
aka SPIRITLEVEL - August 7, 2009 at 4:06am
COULD EVERYONE STOP SAYING THAT STUPID LINE ,WORKED LIKE A CHARM COZ ITS ALWAYS AN COMPLETE HEADACHE & ALL I EVER HAVE IS PROBLEMS ,THIS IS SO MUCH MORE BUGGIER THAN 3.0 ,APPLE NEED TO SORT THEIR SHITOUT
babimu
babimu - August 2, 2009 at 8:57am
I also had a problem. Seems I cant find the IPSW file. Already download the ZIP file and extract it. But I can't find the WHITE BOX icon. What happen? Can someone help me please?
Brian101
Brian101 - August 2, 2009 at 9:12am
Same here. I've downloaded the file instead of extracting the .zip i've renamed it to .ipsw and still i can't find/jailbreak :(
me
me - August 2, 2009 at 9:18am
dude,try not to unzip the file but change the file name to "apple.ipsw". I can see the icon now
hamital
hamital - August 2, 2009 at 9:19am
I think you should redownload the file and after it is finish, no need to extract the file. Just only change the file name ( FILE TYPE ) to .ipsw. If you do it correct, you'r see the white box icon.
Lashley
Lashley - August 2, 2009 at 10:12am
You can update through itunes. let it lock up your phone then unlock with redsnow, uses the 3.0 ispw. when you are done you should have 3.0.1 os, just look in the settings to confirm. Just be prepared to lose everything
djdrool91
djdrool91 - August 2, 2009 at 10:32am
actually dont update your phone first and do a windows search for the file and it should come out in the itunes/iphone update...make a copy of it and store it somewhere else it should workl
Ramses
Ramses - August 2, 2009 at 6:15am
so where you get redsnow 0.8 ? there are no links no checksums nothing
hamital
hamital - August 2, 2009 at 7:22am
Check TUTORIALS, iPHONE, UNLOCK or follow this below link: https://iclarified.com/2311
Ramses
Ramses - August 2, 2009 at 9:35am
nothing that i did not know already and no links to redsnow 0.8
hamital
hamital - August 2, 2009 at 10:01am
First folow this link: https://www.iclarified.com/entry/index.php?enid=2311 Choose your favorite unlock or JB program and click. You'll find the links and introductions.
LAshley
LAshley - August 2, 2009 at 10:08am
Pirate bay
Ramses
Ramses - August 2, 2009 at 10:47am
ok had to click last leaf and for 3g got this: https://www.iclarified.com/entry/index.php?enid=4301 it has no redsn0w 0.8 only 0.7.1 end leaf for 3gs and pirate bay have 0.8 but my concern is lack of check-sums on the blog so i cannot verify download
jonnikuest
jonnikuest - August 3, 2009 at 1:34am
http://thepiratebay.org/user/iphonedev/ all the official torrents are located there, at least until pirate bay is taken completely down by the euros
Scott
Scott - August 2, 2009 at 12:56am
Worked for me, but not quite like a charm. Seems a lot buggier than my 3.0 Pwnagetool jailbreak/unlock on my 2G; it's frozen several times in just a day where my original Jailbreak didn't freeze once, and the camera stopped working after taking 4 pictures today. Kind of concerned.
dazednconfused
dazednconfused - August 1, 2009 at 10:42pm
So I'm trying to JB my 3G after 3.0.1 and when I run redsn0w and look for the ipsw file it isn't anywhere. i've downloaded the zip file from this site but can't find the file. Kinda lame I know. Any help is appreciated.
Bashar
Bashar - August 1, 2009 at 11:33pm
when you download the ipsw file,, i think by default, the file type box will say winzip or something like that... hit the down arrow button there, and choose all files, and then put .ipsw at the end of the file name and that should do the trick for you... good luck..
hamital
hamital - August 2, 2009 at 4:26am
You should change the file name to ipsw, no need to unzip the file.
dazednconfused
dazednconfused - August 2, 2009 at 1:10pm
When you download the link it is an entire folder not just a file. Do I ipsw the whole folder? If not which specific file? Thanks again. Also I'm doing this on a mac, does that make any difference?
djdrool91
djdrool91 - August 2, 2009 at 1:41pm
if you already have the 3.0.0 installed then i suggest you do a search in windows of that file it should come out in your itunes folder not too sure about mac though it should be in your itunes/iphone something you might want to keep a copy of it hope this helps =]
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Ventura
Where to Download iPod touch Firmware Files From
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS