December 13, 2024
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Posted February 3, 2009 at 11:40pm by iClarified
EnglishChinese (Traditional)CroatianCzechFrenchGermanGreekIndonesianItalianLatvianPolishPortuguese (Brazil)RomanianSlovenianSpanishSwedishTurkishUkranian
Acestea sunt instructiunile referitoare la jailbreak pentru 3G iPhone care au firmware 2.1-2.2 folosind QuickPwn pentru Windows. Inainte de a incepe asigurati-va ca ati facut "restore" la versiunea dorita de firmware folosind iTunes.

Nota*: Daca faceti acest lucru pentru decodare 3G si 2.2 este ultima versiune de firmware, pur si simplu apasati "restore" in iTunes inainte de a incepe.

Primul pas
Crearea unui folder denumit Pwnage pe desktop.


Descarcati urmatoarele fisiere si mutati-le in noul folder "Pwnage" pe care abia l-ati creat:
- QuickPwn 2.2
- 2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw

Extrageti din arhiva QuickPwn22.zip in folder-ul Pwnage.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 2
Conectati telefonul iPhone 3g la calculator si porniti iTunes.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Select Telefonul ce urmeaza a fi jailbreak lista din partea stanga. Apasati si tineti apasat tasta "shift" si dati click pe butonulRestore. Optiunea "Restore" este de preferat deoarece nu va lasa nici un spatiu nefolosit pe iPhone-ul dvs.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Deschideti folder-ul "Pwnage" de pe desktop si selectati 2.2 firmware ipsw. Apasati butonul Open pentru a continua.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasu 3
Dupa ce iTunes a terminat de updat-at iPhone-ul la 2.2 firmware puteti lansa QuickPwn.exe care se afla in folder-ul "Pwnage" de pe desktop.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 4
Asigurati-va ca iPhone-ul este conectat la calculator si apasati sageata albastra pentru a continua.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 5
Apasati pe butonul Browse pentru a selecta firmware-ul pentru iPhone-ul dvs.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 6
Selectati 2.2 firmware ipsw din folder-ul "Pwnage" de pe desktop si apoi apasati butonul Open.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 7
QuickPwn va compara ipsw-urile pentru a vedea daca se potrivesc. Apasati pe sageata albastra pentru a continua.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 8
Puteti selecta acum daca adaugati sau nu Cydia, Installer, sau pentru a inlocui imaginile de la pornirea telefonului Replace Boot Logos. Selectati operatiunile pe care le dorit si apasati sageata albastra pentru a continua
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 9
QuickPwn va va ruga sa confirmati ca iPhone-ul este conectat la calculator prin USB inainte de a continua. apasati sageata albastra pentru a incepe.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 10
QuickPwn va restarta iPhone-ul automat in starea "recovery mode". in momentul in care se afla in aceasta stare veti fi atentionati : Tineti apasat butonul "Home" pentru 5 secunde, Tineti apasate butoanele "Home" si "Power" pentru 10 secunde, apoi sa eliberati butonul "Power" dar sa mentineti apasat butonul "Home" pana cand iPhone-ul va intra in modul "DFU".

Urmariti imaginile de pe ecran si urmati instructiunile
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 11
In momentul in care QuickPwn detecteaza iPhon-ul in modul "DFU" va incepe automat procedura de jailbreak.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)

Pasul 12
Cand operatiunea de jailbreak va fi terminata, QuickPwn va va informa ca a fost facuta cu succes.
Cum sa Faci Jailbreak la iPhone-ul 3G 2.x.x Folosind QuickPwn (Windows)
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (578)
You must login or register to add a comment...
zaymg
zaymg - May 21, 2013 at 5:07pm
thank
carnival cruises
carnival cruises - April 19, 2011 at 5:10pm
wonderful website keep up the good work.
Valerie N
Valerie N - August 1, 2009 at 12:03pm
I got through all the steps, now I'm waiting for my iPhone to reboot and nothing ! It's keeps buzzin like it's going to turn on but it doesn't and itunes doesn't show that my iPhone is connected ! Can somebody post what to do now?
joao
joao - July 20, 2009 at 6:25pm
I want to unlock and jailbrake my iPhone 3G but I forgot my passcode. Can anyone help me override the passlock so I can unlock/jailbrake my iPhone.
Shaik usman
Shaik usman - June 19, 2009 at 3:08am
i tried to download through the link provided after download, i couldn't found the restore firmware.please help me i wanna unlock 2.2.1(3G).thanks
prongs
prongs - June 17, 2009 at 3:57am
Can I use this method to jailbreak an otb iphone 3g thereby also activating it? Or is there another procedure to follow to activate it first. Kindly help.
iphone noob
iphone noob - June 6, 2009 at 7:12am
everything was ok untill the third step man it came out a pop out when i click to launch quickpwn it says an error had cause the program to stop runing WTF? BTWW i am running on vista 32bit system help me man
fun@fun
fun@fun - July 13, 2009 at 3:38pm
I have very same problem. My computer is on XP
margarita
margarita - June 4, 2009 at 8:50pm
is it possible to do all this without losing all the contacts, applications, etc?
fank
fank - June 4, 2009 at 7:34pm
i have a jailbroken iphone 3g but can i use ne sim card wid it or it will work only wid the turbo sim..
Shaggy
Shaggy - June 3, 2009 at 11:27am
I get to the QuickPwn step where it says 'wait for your phone to connect in Recovery Mode'... but nothing happens...it wont connect??? Anyone got any ideas? It connects OK through I tunes and I can get this far on the jailbreak. Am I doing anything wrong?
jon
jon - June 8, 2009 at 2:57pm
im having the same problem with quickpwn. any fix?
Nicole
Nicole - June 11, 2009 at 4:14pm
Same Problem... Does it ever go to recovery mode???
joe
joe - November 1, 2009 at 3:43pm
Im the same cant fix this anyone found a solution to this ?????????
Toni
Toni - June 3, 2009 at 6:37am
I succesfully jailbreaked my iphone 3g with firmware 2.2.1. and it works great. I had slight problems with ipsw file. After some delay I removed zip extension and I was able to find ipsw file when QuickPwn asked me to browse for 2.2.1 firmware. Go to Start, Control panel, Folder Options, View, Hide extensions for known file type and then rename folder and remove zip extension. I hope this helps. Bye
Marc
Marc - June 1, 2009 at 6:10am
Thanks for the explanation. It works great and I like the pineapple.
Chris
Chris - May 27, 2009 at 1:17am
Currious, I have been using ym Iphone since august 08, if I do this restoral for the jailbreak will it wipe all my contacts and everything? if it does is there anyway to merge the two restores, my original one with the jailbroken version?
jazz
jazz - May 27, 2009 at 2:42am
Right click ure iPhone in iTunes and create backup then u can restore from backup later
vedtam
vedtam - May 24, 2009 at 3:54pm
Hi, if I have a new, bricked iPhone 3G I guess I have to start with step 4... or? THX!!!!
Han
Han - May 23, 2009 at 5:31pm
When I get to the `Browse for ipsw` step, I put in the file, 2.2.1, and it should be working, but the blue arrow wont load, and so I cant carry on with the jailbreaking. Nor can I see the iPod that should be on the left hand side. (the one that gets a check mark). Help please?
robert
robert - June 3, 2009 at 5:47am
I am having exactly the same issue. Browse for the firmware and says that quickpawn does not update firmware. It seems the firmware has an extra "2_" at the star tof the file name or something. Please help !!!
yasbm
yasbm - May 22, 2009 at 4:40pm
Iphone 3G firmware 02.08.01 version 2.0.2(5C1) if i upgrate to 2.2.1 i will have problem with it ? sorry i am new on this thanks for helping
vimm
vimm - May 23, 2009 at 12:34pm
if you want to unlocke your phone by useing yellowsnow do not upgrade to 2.2.1. you do custom restore to 2.2.0. I just did my.I have the same firmware.
Nathan
Nathan - May 20, 2009 at 5:25am
Hi, I followed the instructions. In the middle of first steps (restore with itunes) i get error (9) can't restore. What can I do? if I restore it will put the newest version, which is not jailbroken and i will not be able to jailbreak it... how do I restore to exactly what I had before trying? thanks!
nnm
nnm - May 21, 2009 at 12:39am
I used Itunes 7.7 to restore
christopher357
christopher357 - May 19, 2009 at 3:26pm
if i hack my iphone 2.2.1 can i restor it so the stor cant se that i have hackt it if its stop working??
dono
dono - June 1, 2009 at 10:10am
My i-ph 16Gb 2.2.1(5H11)froze before I got to Step3...! Screen has as a pic of a USB plug and an arrow pointing it at the iTunes logo which has a little picyure of a lock just above it...
ARASH
ARASH - May 18, 2009 at 2:05am
hey i have a big problem ,it stays on the reboot screen for like 30 mins and keeps vibrating evry couple of minutes…what am i to do?
Felix
Felix - May 13, 2009 at 10:47am
I restored my iphone using iPhone1,2_2.2_5G77_Restore.ipsw & quickpwn. Everything worked, except that i dont have service. Can someone help me please? ( flex60mph@aim.com )
jazz
jazz - May 13, 2009 at 4:52pm
Have u installed yellowsn0w from cydia
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download HomePod Firmware Files From
Where to Download macOS Sequoia
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS