December 2, 2024
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Како откључати iPhone 3G, 3GS користећи UltraSn0w

Posted November 28, 2010 at 11:55pm by iClarified
EnglishArabicBulgarianChinese (Simplified)CroatianCzechFinnishFrenchGermanHebrewIcelandicIndonesianItalianPolishPortuguesePortuguese (Brazil)RomanianRussianSerbianSlovakSpanishSwedishTurkishUkranianVietnamese
Ово су упутства како да откључате iPhone 3G и iPhone 3GS, да би користили на било којој GSM мобилној мрежи, користећи UltraSn0w.

Пре него што наставите са упутством морате имати jailbroke-ован iPhone и морате имати 04.26.08 baseband(modem firmware).Ово значи да морате имати 3.0 firmware jailbrake-ован са PwnageTool или RedSn0w програмом.

Да би сте проверили вашу firmware као и modem firmware(baseband) верзију, пратите ова упутства. Ако немате baseband верзију 04.26.08 онда требате да пратите ова упутства пре откључавања: Mac, Windows


Ако сте на T-Mobile искључите 3G пре почетка...



Први корак
Уђите у Cydia Installer са SpringBoard-а.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Други корак
Стисните на Manage иконицу на дну екрана.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Трећи корак
Стисните велико Sources дугме
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Четврти корак
Стисните Edit дугме у горњем десном углу.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Пети корак
Стисните Add у горњем левом углу
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Шести корак
Укуцајте http://repo666.ultrasn0w.com/ у source url и стисните Add Source дугме.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Седми корак
Када се сорс додао стисните дугме Return to Cydia .
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Осми корак
Стисните Done дугме у горњем десном углу екрана.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Девети корак
Стисните repo666.ultrasn0w.com са листе сорсева.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Десети корак
Стисните ultrasn0w са листе пакета.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Једанаести корак
Стисните Install угме у горњем десном углу екрана.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Дванаести корак
Стисните Confirm дугме у горњем десном углу екрана.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Тринаести корак
Када се инсталација заврши стисните велико Return to Cydia дугме.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Четрнаести корак
Сада стисните Home дугме и искључите и упалите iPhone. Ово радите тако што држите power дугме 3 секунде па померите power слајдер на десно. Стисните power дугме поново да укључите телефон.
Како откључати iPhone 3G, 3GS користећи UltraSn0w

Петнаести корак
Сада можете користити SIM по вашем избору!
Како откључати iPhone 3G, 3GS користећи UltraSn0w Како откључати iPhone 3G, 3GS користећи UltraSn0w

***ХВАЛА: Велико хвала свим члановима iPhone Dev-Team за сав њихов тежак посао!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (1240)
You must login or register to add a comment...
georgi
georgi - May 17, 2017 at 1:37pm
and for me doesn't work
soly dolyinh
soly dolyinh - August 28, 2016 at 2:54pm
sorry i am still locked it all worked fine except the part where i check it do i have to restart no service iphone 4 04.12.09
Dragec
Dragec - March 28, 2016 at 3:56am
I finally made it on an iPhone 3G, 4.2.1, 5.15.04!!! Thanx for the tutorials, although they contain only bits of information, and if you get stuck anywhere you'll have to google further. To succeed, I used redsn0w v. 0.9.14b2, not the latest one (the latest one will give you faulty baseband after downgrade with no wi-fi, bluetooth or IMEI, and you will have to start all over again). After upgrading the baseband to 6.15.00, I got stuck on apple logo (bricked phone). To bypass this, you need to download, and Select IPSW iOS 4.1 (not 4.2.1), and use "Just boot" option. After the phone boots, it will be buggy (the screen), but it will become alive again. Check if the baseband is 6.15.00. If yes, proceed to Jailbreak in redsn0w (this time using 4.2.1 IPSW), and tick the boxes Install Cydia, and Downgrade baseband. After it is done, you will have an iPhone with baseband 5.13.04, which you can unlock with ultrasn0w, but (most probably) with "No service" bug. To resolve this, follow the tutorial concerning this matter, and voila! iPhone unlocked. This procedure felt like walking through thick bushes...
H1uam
H1uam - October 27, 2014 at 5:18pm
Great instructions, best I had found as others I tried took me hours and did not work. Many thanks
jaykay
jaykay - October 20, 2014 at 1:55am
how to unlock you iPhone just go on your iCloud account on a computer go to finder click devices click the device logged in to your iCloud click listed then put new pass code then got to your iPhone put in new pass code. your phone will ask for iCloud or apple id then put the pass code in that then the iPhone will be unlocked
ribas
ribas - July 9, 2014 at 9:05pm
nao funcionou, fiz como foi ensinado. did not work, as I was taught.
bob
bob - June 9, 2014 at 2:42pm
Nope, still "searching". :(
iuhoosiers
iuhoosiers - June 11, 2014 at 12:51am
I get the same message... "Searching..."
Huy
Huy - June 6, 2014 at 12:54pm
Cam on ban rat nhieu
rosh72
rosh72 - April 27, 2014 at 2:42pm
how to unlock iphone 4 32 gb ios 5.1.1 baseband 4.12.01 japansoft carrier
dundas
dundas - April 18, 2014 at 11:59pm
I can't seem to figure out how to unlock my phone. I have 3gs with 6.1.6 modern firmware 5.16.08 I have jailbreak with redsn0w Installed Ultrasn0w I am stuck on "No service" Ive tried so many things I cant figure it out.
Riz
Riz - May 28, 2014 at 5:06pm
I am also having the same problem, were you able to fix it ? if yes, how ?
guhgyg gygfjgfbh
guhgyg gygfjgfbh - January 25, 2015 at 9:40pm
hola.
huy0979
huy0979 - March 6, 2014 at 1:13pm
Does this work on a Iphone4s?
Leandro Salazar
Leandro Salazar - March 8, 2014 at 10:30pm
no, this metod doesn't work for iphone 4s.....
Logan
Logan - March 5, 2014 at 5:05pm
iPhone 3GS Version: 6.1.6 Modem firmware: 06.15 Install cydia ultrasn0w install finish... No service... How? Please help?
nomad
nomad - March 7, 2014 at 9:13pm
uninstall ultrasn0w, use redsn0w to downgrade from ipad baseband, that should bring you to baseband 5.13.0 or something like that, then install ultrasn0w again, good luck
nomad
nomad - March 8, 2014 at 11:13pm
correction : that should bring you to baseband 5.13.04 , i just tried it today
yrubin07
yrubin07 - April 29, 2014 at 7:42am
@nomad I tried downgrading and it gets stuck on the white text on screen part doesn't even get to flashing baseband
yrubin07
yrubin07 - April 29, 2014 at 7:59am
@nomad I tried downgrading and it gets stuck on the white text on screen part doesn't even get to flashing baseband
iphony
iphony - October 21, 2014 at 5:52pm
That worked for me on 3GS 6.1.6. From the beginning if I remember correctly, 1. redsn0w: uncheck Cydia and everything else, check upgrade to ipad baseband 2. Repeat redsn0w, this time with: check Cydia, check downgrade baseband. Now you have tethered boot 3. In redsn0w: Just boot 3. From Cydia, install p0sixspwn. This makes it untethered boot. 4. From Cydia, add the ultrasn0w repository and then install ultrasn0w. Voila! Service! For me the key step was to start over, then upgrade baseband first and then downgrade baseband. Finally recognized T-mobile sim.
danleygg99
danleygg99 - March 3, 2014 at 3:14pm
Hey guys, want to unlock ATT devices? You can check out ATTiphoneunlocking, its the site i have been using for years to unlock my phone, it works pretty good
Thomas
Thomas - March 1, 2014 at 10:44pm
Just did the jailbreak on my 3G using the iClarified instructions, and included the iPad baseband when I did it. Worked fine, now jailbroken, and shows 06.15.00... but, when I try to run the above, when I click to install Ultrasn0w, I get "the requested modifications cannot be applied due to...' :S
vxr
vxr - February 26, 2014 at 5:33am
my iphone 4 basband is 4.12 how to downgrade to 4.10 ? 1.59 ?
daoshi
daoshi - January 27, 2014 at 6:10am
I have an iPhone 4s with iOS 7.0.4, I cannot down grade to 6.x or 5.x. After I tried the steps suggested, it comes with a message "SIM Not Valid". Anyone suggestion, ot it just doesn't work for 7.0.4? Thanks. Joseph
Duardinho
Duardinho - January 25, 2014 at 5:40pm
Hi all! I've just jailbreaked my iphone and now tried to unlock it because I changed carrier... now, it keeps searching for the carrier and I cannot make any calls... any suggestion? I'm a bit "fresh" on this kind of matters. Thanks all
jag broncano
jag broncano - January 21, 2014 at 5:57am
Thanks you so much..
Jimmy
Jimmy - January 14, 2014 at 5:48pm
Worked at last. Thanks guys. Downgrading my baseband from 6.15 to 5.13.04 did the trick. I have 3Gs and updated it to 6.1.3. with iTunes, JB with redsnow, install Cydia, Ultrasnow, then p0sixspwn for untethered JB. Found everything OK, except it was still SIM locked. Did the baseband downgrade with Redsnow and right away I could call out. Thanks again.
Gaurav
Gaurav - January 11, 2014 at 8:44am
Thanks Iclarified. I got my phone unlocked. Now can i update my phone to ios 6.1.3 (currently on 4.1.1) without getting my phone locked again ?
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS