June 13, 2024
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

Posted February 3, 2009 at 11:40pm by iClarified
EnglishChinese (Traditional)CroatianCzechFrenchGermanGreekIndonesianItalianLatvianPolishPortuguese (Brazil)RomanianSlovenianSpanishSwedishTurkishUkranian
以下是如何使用QuickPwn (Windows 版) 去破解你的 3G iPhone 2.1-2.2.1 iPhone 固件的指引

如果你打算破解你的 iPhone,可以使用以下教學,條件是你的iPhone 的 baseband 版本是 02.28 或以下及你已將你的 iPhone 回復到 2.2 (不是 2.2.1)。 如果你使用此教學去回復及破解 2.2.1 固件,目前並不能解鎖 (Unlock) 的。 你可以到以下網址了解如何檢查你的 iPhone 的baseband 版本 請按這裡

在你的電腦桌面建立一個文件夾並命名為 Pwnage

下載以下的檔案及放置在 Pwnage 文件夾內:

- QuickPwn-225-2.zip

- 2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw

- 2.2.1 (3G): iPhone1,2_2.2.1_5H11_Restore.ipsw

將QuickPwn-225-2.zip 解壓去 Pwnage 文件夾
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

將你的 iPhone 接駁去電腦及開 iTunes
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

在左面的裝置清單選擇你的 iPhone,現在按住 Shift 及 用滑鼠按 回復 鍵。 用回復比較好因為不會在你的 iPhone 建立任何的浪費空間
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

請到你電腦桌面的 Pwnage 文件夾及選擇固件的 ipsw,用滑鼠按 打開 鍵去繼續
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

當 iTunes 完成更新你的 iPhone 到指定固件後,你可以從電腦桌面的 Pwnage 文件夾開 QuickPwn.exe
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

確定你的 iPhone 已連接電腦後就用滑鼠按藍色箭咀去繼續
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

用滑鼠按 Browse 鍵去尋找 iPhone 固件
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

在電腦桌面的 Pwnage 文件夾選擇固件的 ipsw,然後用滑鼠按 Open
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

QuickPwn 會檢查 ipsw 確定有效,用滑鼠按藍色箭咀去繼續
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

你現在可以選擇會否加載 Cydia、Installer、或 更換 Boot Logos,選擇好後用滑鼠按藍色箭咀
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

在繼續之前,QuickPwn 現在會問你確定你的 iPhone 已經用 USB 接駁好,用滑鼠按藍色箭咀去進行
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

QuickPwn 現在會自動將你的 iPhone 進入回復模式,當它已在回復模式,請跟著指示做:按住 Home 鍵 5 秒,按住 Home 鍵 及 Power 鍵 10 秒,然後放開 Power 鍵但繼續按住 Home 鍵直至你的 iPhone 已進入 DFU 模式

如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

當 QuickPwn 偵測你的 iPhone 已在 DFU 模式就會開始破解過程
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone

當破解完成, QuickPwn 就會通知你成功了 (successfully)
如何使用QuickPwn (Windows 版) 破解你的 2.x.x 3G iPhone
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
iClarified Icon
Would you like to be notified when we post a new Apple news article or tutorial?
Comments (578)
You must login or register to add a comment...
zaymg - May 21, 2013 at 5:07pm
carnival cruises
carnival cruises - April 19, 2011 at 5:10pm
wonderful website keep up the good work.
Valerie N
Valerie N - August 1, 2009 at 12:03pm
I got through all the steps, now I'm waiting for my iPhone to reboot and nothing ! It's keeps buzzin like it's going to turn on but it doesn't and itunes doesn't show that my iPhone is connected ! Can somebody post what to do now?
joao - July 20, 2009 at 6:25pm
I want to unlock and jailbrake my iPhone 3G but I forgot my passcode. Can anyone help me override the passlock so I can unlock/jailbrake my iPhone.
Shaik usman
Shaik usman - June 19, 2009 at 3:08am
i tried to download through the link provided after download, i couldn't found the restore firmware.please help me i wanna unlock 2.2.1(3G).thanks
prongs - June 17, 2009 at 3:57am
Can I use this method to jailbreak an otb iphone 3g thereby also activating it? Or is there another procedure to follow to activate it first. Kindly help.
iphone noob
iphone noob - June 6, 2009 at 7:12am
everything was ok untill the third step man it came out a pop out when i click to launch quickpwn it says an error had cause the program to stop runing WTF? BTWW i am running on vista 32bit system help me man
fun@fun - July 13, 2009 at 3:38pm
I have very same problem. My computer is on XP
margarita - June 4, 2009 at 8:50pm
is it possible to do all this without losing all the contacts, applications, etc?
fank - June 4, 2009 at 7:34pm
i have a jailbroken iphone 3g but can i use ne sim card wid it or it will work only wid the turbo sim..
Shaggy - June 3, 2009 at 11:27am
I get to the QuickPwn step where it says 'wait for your phone to connect in Recovery Mode'... but nothing happens...it wont connect??? Anyone got any ideas? It connects OK through I tunes and I can get this far on the jailbreak. Am I doing anything wrong?
jon - June 8, 2009 at 2:57pm
im having the same problem with quickpwn. any fix?
Nicole - June 11, 2009 at 4:14pm
Same Problem... Does it ever go to recovery mode???
joe - November 1, 2009 at 3:43pm
Im the same cant fix this anyone found a solution to this ?????????
Toni - June 3, 2009 at 6:37am
I succesfully jailbreaked my iphone 3g with firmware 2.2.1. and it works great. I had slight problems with ipsw file. After some delay I removed zip extension and I was able to find ipsw file when QuickPwn asked me to browse for 2.2.1 firmware. Go to Start, Control panel, Folder Options, View, Hide extensions for known file type and then rename folder and remove zip extension. I hope this helps. Bye
Marc - June 1, 2009 at 6:10am
Thanks for the explanation. It works great and I like the pineapple.
Chris - May 27, 2009 at 1:17am
Currious, I have been using ym Iphone since august 08, if I do this restoral for the jailbreak will it wipe all my contacts and everything? if it does is there anyway to merge the two restores, my original one with the jailbroken version?
jazz - May 27, 2009 at 2:42am
Right click ure iPhone in iTunes and create backup then u can restore from backup later
vedtam - May 24, 2009 at 3:54pm
Hi, if I have a new, bricked iPhone 3G I guess I have to start with step 4... or? THX!!!!
Han - May 23, 2009 at 5:31pm
When I get to the `Browse for ipsw` step, I put in the file, 2.2.1, and it should be working, but the blue arrow wont load, and so I cant carry on with the jailbreaking. Nor can I see the iPod that should be on the left hand side. (the one that gets a check mark). Help please?
robert - June 3, 2009 at 5:47am
I am having exactly the same issue. Browse for the firmware and says that quickpawn does not update firmware. It seems the firmware has an extra "2_" at the star tof the file name or something. Please help !!!
yasbm - May 22, 2009 at 4:40pm
Iphone 3G firmware 02.08.01 version 2.0.2(5C1) if i upgrate to 2.2.1 i will have problem with it ? sorry i am new on this thanks for helping
vimm - May 23, 2009 at 12:34pm
if you want to unlocke your phone by useing yellowsnow do not upgrade to 2.2.1. you do custom restore to 2.2.0. I just did my.I have the same firmware.
Nathan - May 20, 2009 at 5:25am
Hi, I followed the instructions. In the middle of first steps (restore with itunes) i get error (9) can't restore. What can I do? if I restore it will put the newest version, which is not jailbroken and i will not be able to jailbreak it... how do I restore to exactly what I had before trying? thanks!
nnm - May 21, 2009 at 12:39am
I used Itunes 7.7 to restore
christopher357 - May 19, 2009 at 3:26pm
if i hack my iphone 2.2.1 can i restor it so the stor cant se that i have hackt it if its stop working??
dono - June 1, 2009 at 10:10am
My i-ph 16Gb 2.2.1(5H11)froze before I got to Step3...! Screen has as a pic of a USB plug and an arrow pointing it at the iTunes logo which has a little picyure of a lock just above it...
ARASH - May 18, 2009 at 2:05am
hey i have a big problem ,it stays on the reboot screen for like 30 mins and keeps vibrating evry couple of minutes…what am i to do?
Felix - May 13, 2009 at 10:47am
I restored my iphone using iPhone1,2_2.2_5G77_Restore.ipsw & quickpwn. Everything worked, except that i dont have service. Can someone help me please? ( flex60mph@aim.com )
jazz - May 13, 2009 at 4:52pm
Have u installed yellowsn0w from cydia
More Comments
Recent. Read the latest Apple News.
Tutorials. Help is here.
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.