October 11, 2024

How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Posted January 27, 2008 at 10:02am by iClarified
These are instructions on how to Update and Jailbreak to 1.1.3 iPhone Firmware with the Official Dev Team Method using an Installer Source.

Please realize that many if not most applications designed for 1.1.2 do not work yet with 1.1.3 and may cause crashes etc. This includes SummerBoard and Customize! It might even be a good idea to remove all extra applications before performing the update! Many are finding this makes the update alot smoother.

You can find the Mac version of this tutorial here:
How to Officially Update and Jailbreak to 1.1.3 iPhone


You can find the Windows version of this tutorial here:
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware Using Windows

To follow these instructions you need to have a 1.1.2 Jailbroken iPhone. You can find instructions on how to do this here:
Windows: How to Activate and Jailbreak Your OTB 1.1.2 iPhone Using Windows
Mac: How to Activate and Jailbreak Your OTB 1.1.2 iPhone

Step One
Press to select Settings from your springboard.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Two
Press to select General from the list of categories.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Three
Press to select Auto-Lock from the General menu.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Four
Press to select Never from the list of Auto-Lock times.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Five
Press the Home button to return to your springboard.

Step Six
Press to select Installer from your springboard.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Seven
Press Donate Later to continue into the Installer app. Note: Come back later and donate as this app is helping you out a ton!
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

NOTE***: If you have not updated Installer you may be requested to Update. Make sure before you continue this tutorial that you have updated to the latest version of Installer! THE OLD VERSION OF INSTALLER WILL NOT WORK ON 1.1.3. You will have to start all over if you forget this!

Step Eight
Press to select the Install tab at the bottom of the screen.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Nine
Press to select the System category.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Ten
Press to select BSD Subsystem from the list of packages.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Eleven
Press to select the Install button at the top right.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Twelve
Press the Install button to confirm installation. You may get a notice. If you do press the OK button.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Thirteen
Once installation is complete you will be taken back to the Categories list. Press to select the Sources tab at the bottom right.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Fourteen
Press to select the Edit button at the top right of the screen.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Fifteen
Press to select the Add button at the top left of the screen.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Sixteen
Add the source http://installer.iClarified.com and press the large OK button.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Seventeen
Press the Done button at the top right hand corner of the screen.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Eighteen
Press to select the Install tab at the bottom of the screen.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Nineteen
Press to select iClarified from the list of Categories.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Twenty
Press to select Soft 1.1.3 Jailbreak from the list of Packages.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Twenty One
Press to select the Install button at the top right of the screen.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Twenty Two
Press to select the large red Install button that appears.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Twenty Three
Press the large OK button to confirm that you set Auto-Lock to never.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Twenty Four
Press the large OK button again.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Step Twenty Five
The install process took me about 20 minutes and then iPhone rebooted.
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

Once the iPhone reboots you will have 1.1.3 Firmware on your iPhone!
How to Officially Update and Jailbreak to 1.1.3 iPhone Firmware (Installer)

NOTES***: If you are having problems with iTunes sync after this soft update/jailbreak then follow this tutorial:
How to Fix Sync Problems After Official 1.1.3 Soft Jailbreak

THANKS***: asap18, bgm, Bugout, bushing, chris_, davidc__, dinopio, drudge, Fred_, ghost_000, gray, MuscleNerd, NerveGas, netkas, np101137, planetbeing, pr3d4k4t, pr3d4t0r, pumpkin, roxfan, Turbo, Whiterat, Zibri, Zf
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (255)
You must login or register to add a comment...
Ponchevez
Ponchevez - February 6, 2009 at 5:15pm
How do I upgrade an unlocked 1.1.4 iPhone to a 2.2 version ? Someone unlocked the iphone for me, but didn't add cydia to the iphone, and some applications don't work anymore I whitnk I need to upgrade. Please help!
brian adams
brian adams - June 11, 2008 at 10:52am
i have a i problem!! i did the 1.1.3 update from a 1.1.2 OTB and no my phone is stuck in recovery mode!! why did it this happen, it doesn't appear anyone else got this error.
Puma
Puma - May 4, 2008 at 11:26am
Hi, After wait 65 minutes..... everything worked OK. Thank you
Kayce
Kayce - April 2, 2008 at 7:37pm
Hi guys, if someone could take a moment to help me out it would be great. I just used this method to upgrade my jailbreaked 1,1,2 iphone and it got stuck at the updating screen for more than 5 hours. I did a reset and the phone rebooted in jailbreaked 1,1.3 mode. Unfortunately it now says "SIM LOCKED" on the top left hand corner. Any idea what to do now?
hss
hss - March 4, 2008 at 11:41pm
Not it is just fine.. The most imp piece of advise which is not mentioned above is that if your phone is stuck at the updating screen for more than 30 mins just reboot it and things wld work fine
Viren
Viren - March 4, 2008 at 1:25pm
Hey! I have a week 51 jailbroken 1.1.2 firmware, I want to upgrade to 1.1.3 but am indoubt after reading the problems people are facing! Is it safe enuf or u suggest waiting some more time before updating???? Pl. advise... Cheers,
HSS
HSS - March 3, 2008 at 12:59pm
my phone is stuck at Updating and jailbreaking for more than 30 mins... Sld i just reboot and phone and try again?
babu
babu - February 29, 2008 at 2:43am
I just updated to 1.1.3, and my installer application vanished. The phone was a 1.1.2 OTB, which I downgraded and then updated to 1.1.2. The update to 1.1.3 worked after failing once. The installer program remained when it failed and the phone was functional. Any ideas?
mostafa
mostafa - February 24, 2008 at 9:27pm
chava ,i had same prob because the upgrade stopped and my iphone keeps on restarting ,unfortunatly i made hole jailbreak and unlock process from the begining ,i had 1.1.2 otb .but first u have to connect phone to computer even it doesn't recognize it and when it starts restarting keep pressing home button until i tunes logo appear and then follow the steps to jailbreak the phone ..hope it helps
Chava
Chava - February 24, 2008 at 8:36am
Hi, i followed all the instructions but my iphone keeps on restarting being stucked with the apple logo, what i can do???
BillyJ
BillyJ - February 23, 2008 at 12:09pm
I have 1.1.3 firmware updated from 1.1.2 OTB...everything works except my custom Ringtones. I use iTONER and i see my custom ringtones on my list but when selected their is no music!! ANY HELP WOULD BE GREAT!! Thanks
dan30
dan30 - February 23, 2008 at 6:17am
I did what was told to do, but my iphone won't restart normally again, it keeps on restarting being stucked with the apple logo, and won't go further please help me, what shall i do?
Eugenius
Eugenius - February 21, 2008 at 7:01pm
The wiggly icon aranger thing didn't work, which I thought was a nice feature, but everything else is working great (so far)! I've been playing around with it after the jailbreak for like 5 minutes. Thanks!!
indianiphone
indianiphone - February 18, 2008 at 11:36pm
@delaneyzero I too have the same problem, did you find a solution for this. Please guys help us out.
mostafa
mostafa - February 18, 2008 at 7:37pm
everyone plz help help help,when i was upgrading to 1.1.3 i don't know how my phone turned off .know it keeps restarting and restarting .what can i do to save my phone ,help me
Mostafa
Mostafa - February 18, 2008 at 2:16pm
does iworld work for 1.1.3 sw??
xtturbox
xtturbox - February 18, 2008 at 10:32am
I noticed after unlocking phone that safari and installer app was not working because i could not get on the edge network with t-mobile. I found that if you go to settings-general-network-edge and put in apn wap.voicestream.com and user name and password are guest. This works for TMOBILE with internet package....no adding roots or anything else....this worked on a 1.1.3 OTB after ziphone unlock!!!! Good luck
Poldark
Poldark - February 18, 2008 at 10:15am
Hi Guys. Solution for all you ppl having problems with using yr installer. I have a 1.1.3 iphone freed with ziphone 2.3 - like many others I was having problems downloading thru Installer 3.0 even though I have a good wifi connection. This works for me so I cant guarantee it will work for everyone. First make sure you have a freed iphone. Then unlock and first go to Maps. open maps and click on Locate Me and wait until the program finds you. Then go to installer, click on Sources and click refresh. This procedure usually frees up my installer. somehow there seems to be a conflict between ziphone and Installer but somehow Maps seems to free Installer up. Important that first files to download are BSD subsystems and Community services. Whenever your installer gets sluggish just close the iphone and reboot it again and follow above procedure. I hope this helps - for me it works wonders and also remember you must REFRESH sources every time before downloading any other apps or files. Good Luck
brianobrien
brianobrien - February 18, 2008 at 9:51am
hi anyone know where i find psx roms? thanks
gaurav208
gaurav208 - February 18, 2008 at 9:06am
Hi Ansh, Use the ibrick sofware (which was used for Jailbreaking 1.1.2 OTB version after downgrading to 1.1.1). You can find it on iclarified under the 1.1.2 jailbreak tutorial. It should help you to reboot your phone and come out of the recovery mode. Do not restore the phone through Itunes to 1.1.3. Thanks, Gaurav
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Ventura
Where to Download iPod touch Firmware Files From
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS