RedSn0w Jailbreak Funcionará Para o iPhone OS 3.0.1

POST

MAIL

Posted August 1, 2009 at 1:33am by iClarified

O iPhone Dev-Team confirmou que é seguro fazer o jailbreak do iPhone OS 3.0.1 com a versão atual do RedSn0w

Você pode re-utilizar redsn0w v0.8 que disponibilizamos algumas semanas atrás para fazer o jailbreak da atualização 3.0.1 de hoje. Apenas deixe o iTunes fazer o update ou restore para você para o 3.0.1 oficial e então rode o redsn0w. O único "truque" é que, quando redsn0w pedir para que você identifique o IPSW utilizado, aponte para o IPSW 3.0 ao invés do 3.0.1. Após o jailbreak, reinstale o ultrasn0w 0.9 se você precisar desbloquear.

A atualização do iPhone OS 3.0.1 foi disponibilizada pela Apple apenas para fixar uma falha no SMS que permite que hackers tomem controle do seu iPhone. Ela não é funcionalmente diferente.

Follow iClarified

Add Comment

Would you like to be notified when someone replies or adds a new comment?

Yes (All Threads)

Yes (This Thread Only)

Notifications

Would you like to be notified when we post a new Apple news article or tutorial?

Yes

Comments (89)

You must login or register to add a comment...

Add Comment

Pat - November 18, 2009 at 11:25am

Hello, I just have this 2G iPhone which is jail break and still runing on 1.1.1. Can I upgrade straight ahead to 3.0.1? Will there be any issues? Could you suggest some ways to do it? Thanks in advance :-)

Reply · Like

Chris - September 7, 2009 at 3:16pm

I have a question. I was wondering if I upgrade my already jailbroken 3gs from 3.0 to 3.0.1. Will it affect my phone? Will I have to re jailbreak it?

Reply · Like

Tara - September 7, 2009 at 5:12pm

I had the same question. Then, I ventured and updated. The jailbreak remailed intact but I had to re-unlock my phone (the procedure of unlock i remains the same as recommended by Dave. Please post a message again after you try.

Reply · Like

Steve - August 30, 2009 at 12:48pm

Hi. I just jail broke my 3GS and everything seems to be good except I don't have cell phone or 3G signal. I won't pick up a carrier or make calls. Am I missing something. I am new to this and I'm not sure if I missed something I was suppose to do. PLEASE HELP!

Reply · Like

Alexander - August 13, 2009 at 11:10am

I can't find redsnow v.8. I have a 2G phone with T-Mobile Unlocked and JB on 3.0. I would like to go to 3.0.1. Am I able to use iTunes Version 8.2.1 to upgrade and the use the instructions given for Redsnow using version .7??????????? Please help.

Reply · Like

Elliott - August 10, 2009 at 5:23pm

Hi, Im Confused!! I Have A 2G Iphone and have now updated to the OS 3.0.1 and have lost my Cydia and other updates!! do i need 2 download the 3.0.1 IPSW from this website? or can i just use the 3.0 IPSW as i did before? Pease Help!

Reply · Like

kenny - August 10, 2009 at 8:53pm

what you need to do is download 3.0 and redsnow. open redsnow and tell it that you to look for 3.0 . That my friend will load cydia again. Kenny.

Reply · Like

Kenny - August 9, 2009 at 11:35pm

Wow, that does really work. Install cydia was a breeze. Thanks guys.

Reply · Like

corylund - August 7, 2009 at 12:42pm

I have a problem. My 3G phone was jailbroken on 3.0, and I updated to 3.0.1. But, I had apps in the Categories folders before doing so (mistake). I jailbroke again, and now, these apps are not in the home screen anywhere, even after restoring. It appears that they are on my phone, but somehow I cannot see them anywhere. This is extremely important, because among these apps was settings and others that are obviously crucial to the phone operation. Also, the battery percentage is still next to the battery. So, there are signs of the previous jailbreak even after restore, but now I can't access any apps. Any help would be GREATLY appreciated.

Reply · Like

Zeljko - August 9, 2009 at 4:50am

I thouht that I was the only one with that problem. I hope that we can resolve that somehow.....

Reply · Like

Zeljko - August 9, 2009 at 6:06am

.....and now I know exactly how :)))) As first thing you must have program categories. Then you must erase everything what you have in categories and make everything like it is the new one. And then you make new categories and just add programs you already have in your Iphone and you will see it will work. :) Have a nice day

Reply · Like

Diego Quintero - September 3, 2009 at 10:06am

ok, but i can't instal categories again, it just desappear, even if i reinstalled, it don't show any where

Reply · Like

JOsU323 - August 5, 2009 at 9:53pm

the questions is, if after jailbreaking using 3.0 ips the bug fixes will still be in effect? Cause thats the whole reason why I upgraded to 3.0.1

Reply · Like

Merlin76 - August 4, 2009 at 10:54am

Does anyone know about the information disclosed in Cydia that Saurik is working on a tool to upgrade without running the JB process again? He asks to give him a week for news....any comment on that one? Cheers.

Reply · Like

MrBlur - August 4, 2009 at 4:24am

Hi guys, I just upgrade my 3g to 3.0.1. everything just fine except my wifi. is there any solution? I hv compared the wifi service with my 3gs. my 3gs work fine but not the 3g. any idea? Thanx fella!

Reply · Like

Lucia - August 3, 2009 at 2:05am

Hi there! I have updated my iPhone to 3.01 firmware and am trying to jailbreak it using redSnow for 3.0. Only problem is it does not recognise the IPSW firmware when I go to shift restore or when I use the redSnow.exe. What do I do now? I have done this a few times and its always the same problem, there is an error with the IPSW. It says to pick the 3.0 IPSW but it doesnt recognise it. Thanks in advance!

Reply · Like

Lucia - August 3, 2009 at 2:18am

BTW I have just the 3G iPhone

Reply · Like

djdrool91 - August 3, 2009 at 4:38am

try connecting your phone to itunes and when its in put it in dfu mode and restore it and let itunes do the update for 3.0.1 then re-download redSnow again (maybe the file has an error) then try again and make sure you click the correct ipsw tell me how it goes i did it without a problem works fine

Reply · Like

djdrool91 - August 3, 2009 at 4:38am

Reply · Like

edaddy - August 3, 2009 at 9:39am

do exactly what RedSnow is prompting you to do. install the update to 3.0.1 through ituens (make sure you back up your Cydia apps first) Download the IPSW (you should still have it if you upgraded to 3.0 and are jail broken) If you get hung up during the rebooting phase in RedSnow unplug your cable and plug into another USB port... then it should reboot. and enjoy being JailBroken

Reply · Like

Merlin76 - August 4, 2009 at 10:53am

Have you tried donwloading the file with Firefox? Because I've seen in different posts that Safari decompresses it so you don't get the file you should be getting...if not check the tutorial in this site to download the one you need again.

Reply · Like

omarelramly - August 3, 2009 at 12:17am

Help plz, it stays at waiting for reboot and nothing happens i tried to restore my iphone 3G again but have the same prob. what can i do!!!?

Reply · Like

djdrool91 - August 3, 2009 at 4:39am

retry to do everything again and make sure its all correct...sometimes it just takes awhile to boot

Reply · Like

omarelramly - August 3, 2009 at 4:54am

i've retried more than 5 times but the same prob i left it at waiting for reboot for more then 5 hours but nothing happens tried evrything, there is something wrong !!!

Reply · Like

djdrool91 - August 3, 2009 at 5:00am

make sure you updated itunes and you have the correct ipsw...plug it in and turn on itunes and put it in DFU mode restore it and let itunes do the update after that jailbreak and unlock it...if that fails try to do it on another computer maybe?...if that still dont work then i'm sorrry i dont know anymore...but give it a try but make sure all the programs are correct i did it and it works fine

Reply · Like

omarelramly - August 3, 2009 at 5:26am

THX Man, i appretiate your help tring a new comuter didnt ran on my mind i just downloaded the redsnow for windows and JB there and it worked thx man for your help

Reply · Like

dj_drool91 - August 3, 2009 at 6:20am

haha np man glad i could help =]

Reply · Like

Ricekake - August 2, 2009 at 7:57pm

No offense, but mine says 3.0.1 (7A400). Might wanna do it again

Reply · Like

djdrool91 - August 3, 2009 at 4:35am

yea same you mihgt wanna redo it mine says 3.0.1 also

Reply · Like

MrBlur - August 4, 2009 at 4:30am

Mine too.. I think you need to redo it once more

Reply · Like

Tara - August 10, 2009 at 1:24pm

I repeated 5 times. I went to Settings/General/About and check Version. Always I found that it is Version 3.0 (7A341) instead Version 3.0.1 (7A341). I first restored the phone 3GS using itunes FW 3.0.1. I checked and found that final version was 3.0.1. Then I restored using Dev Team Redsn0w, the version was 3.0 (I guess it was supposed to be 3.0 version because I am restoring with 3.0 version software). Please tell me how it will be 3.0.1 (when we are restoring using Dev Team's iPhone2,1_3.0_7A341_Restore, this is based on FW3.0)

Reply · Like

dazednconfused - August 2, 2009 at 2:00pm

HELP!! Tried to JB got stuck at waiting to reboot screen in redsn0w. Now I can't restore in itunes. Phone is unresponsive. What should I do?

Reply · Like

djdrool91 - August 3, 2009 at 4:41am

try this plug in your phone and have itunes open...then put the phone into DFU mode a restore button should show and you could restore it...after let itunes update it and do the jailbreak after...try that tell me if it works =]

Reply · Like

omarelramly - August 3, 2009 at 5:30am

hey we found a solution just as u r go to a xp and install redsnow and pick the 3.0 ipsw and it will JB If God Wills tell me if it worked =]

Reply · Like

John - August 3, 2009 at 1:15pm

Hey!, Just unplug your Iphone and plug it in again.. worked for me

Reply · Like

JOJO - August 11, 2009 at 11:31am

@ DAZEDNCONFUSED okay my phone was stuck on waiting to reboot too and i thought that it wasnt turning on...but try holding the power and home button at the same time for about 30 seconds...and that should turn it on...tell me if that works...but still have the same problem with the jailbreak and waiting to reboot...if anyone can help with that thanks

Reply · Like

dazednconfused - August 2, 2009 at 1:38pm

Tried downloading it with Firefox instead of Safari. Worked like a charm no need to unzip.

Reply · Like

omarelramly - August 3, 2009 at 12:14am

i have the same problem it stays saying waiting for reboot and nothing after that any help plz

Reply · Like

ricekake - August 2, 2009 at 1:16pm

Well, I waited to get the go ahead from the dev team and well, I just restored to 3.01 ( wondering if there really is this big threat) and then jailbreaked to redsnow and all went smooth. Guys, remember to use apt back up from cydia to save yourself a days worth of putting all your apps back on. Again we thank you for all your hardwork

Reply · Like

Merlin76 - August 2, 2009 at 7:06pm

Try downloading it with Firefox instead of Safari to get the "untouched" file.

Reply · Like

aka SPIRITLEVEL - August 7, 2009 at 4:06am

COULD EVERYONE STOP SAYING THAT STUPID LINE ,WORKED LIKE A CHARM COZ ITS ALWAYS AN COMPLETE HEADACHE & ALL I EVER HAVE IS PROBLEMS ,THIS IS SO MUCH MORE BUGGIER THAN 3.0 ,APPLE NEED TO SORT THEIR SHITOUT

Reply · Like

babimu - August 2, 2009 at 8:57am

I also had a problem. Seems I cant find the IPSW file. Already download the ZIP file and extract it. But I can't find the WHITE BOX icon. What happen? Can someone help me please?

Reply · Like

Brian101 - August 2, 2009 at 9:12am

Same here. I've downloaded the file instead of extracting the .zip i've renamed it to .ipsw and still i can't find/jailbreak :(

Reply · Like

me - August 2, 2009 at 9:18am

dude,try not to unzip the file but change the file name to "apple.ipsw". I can see the icon now

Reply · Like

hamital - August 2, 2009 at 9:19am

I think you should redownload the file and after it is finish, no need to extract the file. Just only change the file name ( FILE TYPE ) to .ipsw. If you do it correct, you'r see the white box icon.

Reply · Like

Lashley - August 2, 2009 at 10:12am

You can update through itunes. let it lock up your phone then unlock with redsnow, uses the 3.0 ispw. when you are done you should have 3.0.1 os, just look in the settings to confirm. Just be prepared to lose everything

Reply · Like

djdrool91 - August 2, 2009 at 10:32am

actually dont update your phone first and do a windows search for the file and it should come out in the itunes/iphone update...make a copy of it and store it somewhere else it should workl

Reply · Like

Ramses - August 2, 2009 at 6:15am

so where you get redsnow 0.8 ? there are no links no checksums nothing

Reply · Like

hamital - August 2, 2009 at 7:22am

Check TUTORIALS, iPHONE, UNLOCK or follow this below link: https://iclarified.com/2311

Reply · Like

Ramses - August 2, 2009 at 9:35am

nothing that i did not know already and no links to redsnow 0.8

Reply · Like

hamital - August 2, 2009 at 10:01am

First folow this link: https://www.iclarified.com/entry/index.php?enid=2311 Choose your favorite unlock or JB program and click. You'll find the links and introductions.

Reply · Like

LAshley - August 2, 2009 at 10:08am

Pirate bay

Reply · Like

Ramses - August 2, 2009 at 10:47am

ok had to click last leaf and for 3g got this: https://www.iclarified.com/entry/index.php?enid=4301 it has no redsn0w 0.8 only 0.7.1 end leaf for 3gs and pirate bay have 0.8 but my concern is lack of check-sums on the blog so i cannot verify download

Reply · Like

jonnikuest - August 3, 2009 at 1:34am

http://thepiratebay.org/user/iphonedev/ all the official torrents are located there, at least until pirate bay is taken completely down by the euros

Reply · Like

Scott - August 2, 2009 at 12:56am

Worked for me, but not quite like a charm. Seems a lot buggier than my 3.0 Pwnagetool jailbreak/unlock on my 2G; it's frozen several times in just a day where my original Jailbreak didn't freeze once, and the camera stopped working after taking 4 pictures today. Kind of concerned.

Reply · Like

dazednconfused - August 1, 2009 at 10:42pm

So I'm trying to JB my 3G after 3.0.1 and when I run redsn0w and look for the ipsw file it isn't anywhere. i've downloaded the zip file from this site but can't find the file. Kinda lame I know. Any help is appreciated.

Reply · Like

Bashar - August 1, 2009 at 11:33pm

when you download the ipsw file,, i think by default, the file type box will say winzip or something like that... hit the down arrow button there, and choose all files, and then put .ipsw at the end of the file name and that should do the trick for you... good luck..

Reply · Like

hamital - August 2, 2009 at 4:26am

You should change the file name to ipsw, no need to unzip the file.

Reply · Like

dazednconfused - August 2, 2009 at 1:10pm

When you download the link it is an entire folder not just a file. Do I ipsw the whole folder? If not which specific file? Thanks again. Also I'm doing this on a mac, does that make any difference?

Reply · Like

djdrool91 - August 2, 2009 at 1:41pm

if you already have the 3.0.0 installed then i suggest you do a search in windows of that file it should come out in your itunes folder not too sure about mac though it should be in your itunes/iphone something you might want to keep a copy of it hope this helps =]

Reply · Like

More Comments

Recent. Read the latest Apple News.

RECENT

Apple Announces New 'Sneaky Sasquatch' Update and In-Store Events, Four New Games Coming in January

Apple Sets April 15 Premiere for 'Margo's Got Money Troubles' Starring Elle Fanning and Michelle Pfeiffer

Apple Launches Tap to Pay on iPhone in Hong Kong

iPhone 16 Named World's Best-Selling Smartphone in Q3 2025 [Report]

Apple Details Developer Requirements for Australia's New Under-16 Social Media Ban

More News

Tutorials. Help is here.

TUTORIALS