March 29, 2024
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Posted May 6, 2011 at 1:09pm by iClarified
EnglishPortuguese (Brazil)Spanish
Essas são instruções para fazer jailbreak no seu iPhone 3GS no firmware 4.3.3 usando RedSn0w para Windows. A versão para Mac deste tutorial está em here.

Certifique-se em não atualizar para o iOS 4.3.3 se você depende de um desbloqueio já que não está ainda disponível, a não ser que você opte por usar a baseband do iPad.

IMPORTANTE PARA DESBLOQUEIOS
Durante este processo, você pode atualizar sua baseband para a versã0 06.15. Se você usa a 05.14 ou 05.15 ou maior, precisará fazer isso para desbloquear. Voc&e não precisa fazer isso para fazer apenas jailbreak. Por favor leia atentamente o link a seguir antes de decidir se deve fazer isto ou não. Você pode encontrar nossa versão de basebandaqui.


1. Não tem como voltar para basebands anteriores a partir da 06.15, e não tem como esconder a versão de sua baseband da Apple. Você estará violando sua garantia de um jeito bem óbvio.
2. Se alguma baseband futura for lançada com uma correção crítica, você não conseguirá atualizar para ela se for da sequência 05.XX (novamente, você não atualizaria para ela, já que gostaria de manter o desbloqueio de qualquer forma)
3. Começando com o FW 4.2.1 se você tem a BB 06.15 no seu iphone, você não poderá restaurar o firmware padrão (ocorrerá erro). Você precisará restaurar para IPSWs customizados apenas (mas se você precisa de desbloqueio, já está fazendo isso)
4. Há registros que 06.15 pode desabilitar seu GPS. O Dev-team está trabalhando num reparo para isto.

Não atualize para 06.15 se você não precisa! Apenas faça isso se você precisa do desbloqueio e está preso na 05.14 ou 05.15, e está disposto a assumir os riscos acima. Se sua baseband já é desbloqueável e você está numa versão de firmware inferior, então use PwnageTool para atualizar para 4.3.3 sem atualizar sua baseband.

Primeiro Passo
Crie uma pasta na sua área de trabalho chamada Pwnage

Baixe RedSn0w de here e coloque na pasta Pwnage. Igualmente, baixe o último firmware 4.3.3 do link abaixo e coloque na mesma pasta.

4.3.3 (3GS): iPhone2,1_4.3.3_8J2_Restore.ipsw

Extraia o arquivo .zip do Redsn0w na mesma pasta.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Segundo Passo
Conecte seu iPhone no computador e abra o iTunes.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Selecione seu iPhone da lista de dispositivos à esquerda. Agora segure Shift e clique em Restore. É melhor fazer Restore pois não gastará espaço desnecessário no seu iPhone.Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Navigate to the Pwnage folder on your desktop and select the 4.3.3 firmware ipsw. Click the Open button to continue.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Terceiro Passo
Assim que o iTunes acabar de atualizar seu iPhone para o firmware desejado, abra a pasta Pwnage na sua área de trabalho e execute o aplicativo redsn0w da pasta redsn0w extraída anteriormente.

** Usuários do Windows 7 talvez precisem rodar o RedSn0w no modo de compatibilidade com o Vista. Você pode fazer isso clicando com o botão direito no executável e selecionando propriedades do menu.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Quarto Passo
Assim que o Redsn0w abrir, clique no botão Browse.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Quinto Passo
Selecione o arquivo IPSW do firmware 4.3.3 na pasta Pwnage na sua área de trabalho e clique em Open.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Você será perguntado se este dispositivo é um modelo novo. Se o seu for, clique em Yes, senão, clique em No.Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Sexto Passo
Assim que o firmware for verificado, clique em Next para continuar.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Sétimo Passo
RedSn0w vai preparar os dados do Jailbreak.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Oitavo Passo
Nessa janela você pode escolher as opções que quiser.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Verbose boot mostra informações detalhadas durante o boot do seu dispositivo, e é necessário apenas para desenvolvedores e usuários avançados.

Certifique-se que Cydia está selecionado. Para este tutorial, vamos selecionar também Custom boot logo e Custom recovery logo.

Quando você clica em selecionar cada logo customizado, uma janela de díalogo abrirá te pedindo para selecionar a imagem de logo. Localize a imagem e aperte open.Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

*Lembre que as regras para logos do boot são: RGB ou formato Grayscale com canal Alpha e dimensões inferiores a 320x480. Se você quiser usar os logos do iClarified, pode encontrá-los aqui:
Boot Logo, Recovery Logo

Se você ler o aviso acima e quiser atualizar sua baseband para a versão 06.15 do iPad, marque Install iPad Baseband. Clique Yes quando perguntado para confirmar sua escolha.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Clique em Next para continuar
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Nono Passo
Por favor conecte seu iPhone no computador e certifique-se que está DESLIGADO. Depois clique em Next.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Décimo Passo
RedSn0w vai te guiar em como entrar no modo DFU.here
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Segure os botões Home e Power por 10 segundos.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Solte o botão Power (liga/desliga) e continue segurando o Home (redondo, centro inferior) até que o RedSn0w detecte seu dispositivo.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Décimo Primeiro Passo
Seu iPhone irá reiniciar.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Décimo Segundo Passo
RedSn0w começará a carregar os novos dados RAM Disk e Kernel.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

Décimo Terceiro Passo
Quando isto estiver terminado, você será notificado que o Redsn0w está terminado. Clique em Finish. Quando seu iPhone terminar de reiniciar (cerca de 5 minutos), ele estará com jailbrake e com o Cydia na SpringBoard.
Como fazer Jailbreak no seu iPhone 3GS usando RedSn0w (Windows) [4.3.3]

*Como de costume. um grande agradecimento aos iPhone Dev-Teams, Geohot, e I0n1c pelo seu trabalho árduo e contribuição à comunidade iPhone.
**Usuários do Windows 7 podem tentar rodar o RedSn0w como administradores no modo de compatibilidade com Windows Vista ou XP caso encontrem problemas.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (168)
You must login or register to add a comment...
Mr.Atak
Mr.Atak - December 27, 2011 at 4:14pm
The last version that is redsn0w 0.9.6rc19 doesnt have an option to select to "upgrade ipad baseband". Also redsn0w 0.9.6rc16 has a option but it cannot fetch the ipad baseband? Any help? My phone is running on 4.3.3 and has baseband 5.16.02. I have to upgrade baseband to 06.15 to unlock.
Pplucky
Pplucky - December 30, 2011 at 2:59pm
Same here: iPhone 3GS, built on week 21/2010, iOS 4.3.3 non-jailbroken, baseband 05.16.02. Need to upgrade to ipad baseband (even with the downsides), so I can unlock it. Which version of redsn0w should I use to accomplish both jailbreak and upgrade baseband? Thanks in advance.
QwErTyAxIs
QwErTyAxIs - December 22, 2011 at 10:06am
is it possible to jailbreak iPhone 3GS with a latest RedSn0w 0.9.9b9d (Windows) for iOS 4.3.3 ??? Pls help
ms.khan
ms.khan - November 28, 2011 at 8:01pm
im not able to run redsn0w & sn0wbreeze .. which program should i choose to 'open with' as default ??? by mistake i had selected notepad .. so now all of the versions r opening with - notepad
JOhn
JOhn - November 22, 2011 at 1:35am
When i run redsn0w along with the ipsw on the page the install ipad baseband does not show in the options. please help
Debo
Debo - September 4, 2011 at 4:19pm
Hello, I am trying to update my iPhone 3GS (current version is 3.1.3 and baseband is 5.12.01) to iOS 4.3.3. The current version is already jailbroken. I am following the steps mentioned in the in the site (How to Jailbreak Your iPhone 3GS Using RedSn0w (Windows) [4.3.3]) but getting an error message "this device isn't eligible for the requested build. 4.3.3". I have also checked the hosts file but there doesnt exists any gs.apple.com entry. The only entry exists in the host file is : 127.0.0.1 localhost ::1 localhost Kindly help me out of this error. I am stuck in the step 2 and not able to proceed. Kindly guide me. Thanks in advance
aj
aj - August 29, 2011 at 2:36pm
hi, i have an iphone 3gs 4.1 with firmware 6.15.00...is it possible for me to upgrade my iphone to 4.3??? with my baseband I'm just not sure if its possible or not, thats why i need to be sure..
Siva
Siva - August 3, 2011 at 11:38am
Hi , I have a 3GS. It was with 4.2.1 I have upgrade to ipad BB to unlock it. Now I have decided to upgrade to 4.3.3 as it is untethered jailbreak. I created a custom firmware using sn0wbreeze and restore via itunes. I got errors like 3128, 600x and finally i got a 1015 error. After this my iphone is always in DFU mode (Black screen). Now if i tried with a 4.2.1 firmware i got the error 28 and if I try with 4.3.3 i am getting 600x error. The phone is always in black screen. If i used the fixrecovery4.3 , it is not doing anything and if i use fixrecovery4.2.1 i got a bright lcd screen and agin it went to black screen. Please let me know ho to solve this?
swarnim
swarnim - July 27, 2011 at 6:29pm
Hi I have a 3GS with OS 4.01 and BB 5.13.04 which is unlocked and JB. Can somebody please help me on what are the step to be followed so that it wont upgrade to BB 6.15 and gets JB. Thanks in advance
swarnim
swarnim - July 27, 2011 at 6:49pm
one more question...will my phone gets locked and i have to unlock if i upgrade my OS or its just a Jailbreak process nothing to do with locking of phone. Please somebody help. Waiting for replies....
person
person - July 22, 2011 at 2:22am
itunes says,"The ipone 'andrew's iphone' could not be restored. An unknown error occured (3194)." What do i do? I have the correct firmware downloaded but it wont let me restore to it.
albertfann
albertfann - July 1, 2011 at 7:06am
the "redsn0w" link is broken, the tutorial is working for my Iphone 3Gs. thanks iClarified..
fahad
fahad - June 17, 2011 at 9:08am
my iphone got stuck on 'waiting for reboot' screen .. what do i do now??
Luiz
Luiz - June 1, 2011 at 4:44pm
The link to download Redsn0w is broken !!!
DR_MCGILL
DR_MCGILL - June 17, 2011 at 10:27am
Yea will this ever get fixed?
Jenn
Jenn - June 28, 2011 at 6:07am
Yep, still appears to be a broken link :(
atif
atif - June 1, 2011 at 4:29am
hey guys my redsnow app freezes when i choose it is older model of 3gs .... then a error msg comes "unexpected error occured " som1 help mee ....
kapil
kapil - May 31, 2011 at 12:04am
Hi, I have a 3GS with baseband 5.14 and 4.1 os. I restored to the latest 4.3 as mentioned in the article in iclarified to unlock. However it was asking me to insert a valid sim to activate. I dont have an ATT SIM. I was using this phone just using Wifi and am in a different country. The restore didnt make any mention of having a valid SIM inserted. I was able to restore by following the procedure but not checking the update ipad baseband. Then I used itunes to get the backup file I had created. A few questions: So, once I update to 6.15 baseband, can I still restore using the same backup? Or do I need to store a custom IPSW and if so how do I do it? Can I still unlock if I dont have an ATT sim? thanks kapil
kapil
kapil - June 15, 2011 at 1:33pm
Unfortunately I didnt get any direct help. But from reading a some guess work I finally got this unlocked. Followed the above procedure to get jailbroken and cydia first. Then updated the ipad baseband. When updating kept an ATT card inside(got it from a colleague as I am not in US) Its now unlocked. 2 issues: GPS works sometimes. Its not unusable, but not accurate either and sometimes doesnt work. The battery drains very quickly (need to recharge every night)
albertfann
albertfann - July 1, 2011 at 9:03am
its doesn't need to use ATT sim cards. ato Redsn0w remember chose "install Cydia" & " ipad basemand" it will ulock your iphone, n ipad basemand use for unlock your carrier ( at cydia search ultrasn0w for unlock carrier) hope it will help.
Olavi
Olavi - May 29, 2011 at 7:52am
If i update through iTunes , does my baseband change? I have iPhone 3GS, 4.0.1 ; baseband 05.13.04
Luiz Filipe
Luiz Filipe - May 27, 2011 at 10:20am
Link Fail: "Page not found. We're sorry, but we were unable to locate the page you requested."
JP
JP - May 28, 2011 at 4:32pm
Be a little intuitive! https://sites.google.com/a/iphone-dev.com/files/home
Jack
Jack - May 25, 2011 at 1:34am
my iphone 3gs was updated to 4.3.3 with baseband 05.16.02, after jailbroken there are no signal for the network, what can i do except changing the baseband to ipad version?
albertfann
albertfann - July 1, 2011 at 9:05am
you should "install ipad basemand" after that at cydia search "ultrasn0w" to unlock your carrier.
HiphOne
HiphOne - May 22, 2011 at 9:37am
I HAVE IPHONE 3GS OLD BOOTROM IM USING NON OFFICIAL NETWORK AND DEPEND ON UNLOCK... MY IPHONE VERSION WAS 3.1.3. I RESTORED IT TO 4.3.3 LAST NIGHT... I STUCK AT JAILBREAK PART REDSN0W FREEZE AT RAMDISK FIRST.. IRESTORED AGAIN AND AGAIN NOW I CHECKED THE IPAD VERSION FOR UNLOCK OT FREEZE AGAIN ON THIS PART.. NOW I CANT EVEN RESTORE IT TO ITUNES IGUESS ITS BASEBAND IS UPDATED ITS STUCK ON RECOVERY MODE... I AM WINDOWS USER CANT HELP WITH PWNAGE TOOL ... PLEASE HELP ME OUT OF THIS..
Siva
Siva - May 19, 2011 at 6:40am
Hi, I have jailbroken and inlocked my iphone 3GS using readsn0w. Now the version is 4.2.1 with baseband 06.15.00. Now can I upgrade the OS version? Please let me know if there are any tutorials.. Regards Siva G
Ashish
Ashish - May 19, 2011 at 3:03am
I was able to get it to work. I have a iPhone 3GS updated with 4.3.3 firmware and base band of 05.16.02. If you plan to unlock, you will have to intall the 06.15.00 base band first. I would recommend doing so locally (http://www.beijingiphonerepair.com/hack/fetch-or-download-ipad-baseband-6-15-00-without-internet-connection-local-computer/). After that is complete, then proceed to the jailbreak steps. It took my two weeks to figure it out and 10 minutes to actually jailbreak and unlock the iPhone.
kapil
kapil - May 31, 2011 at 12:06am
Hi Ashish, Did you need the ATT SIm card to unlock? Also, if something goes wrong what are the steps to restore your iphone to a working condition even if its still locked?
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS