March 28, 2024

Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Posted February 14, 2010 at 11:52pm by iClarified
EnglishDutchFrenchKoreanPolishPortuguesePortuguese (Brazil)RomanianRussianSlovakSpanishSwedish
Este tutorial irá mostrar-lhe como fazer um Jailbreak ao iPhone 3G creando um ipsw alterado que pode "liberta-lo" automaticamente, instalar aplicações, e adicionar o seus proprios logotipos de arranque.

Para aprender a usar o PwnageTool para desbloquear/Jailbreak o iPhone 2G, pode usar o seguinte tutorial here

Se tem o iPhone 3G certifique-se que tem o iTunes 8.2 e o Mac OS X 10.5.7 instalado e continue...





Primeiro Passo
Crie uma pasta chamada de "Pwnage" no Desktop. Nela, precisara de umas quantas coisas:
PwnageTool 3.0, here ou aqui

Também irá precisar do firmware 3.0 do iPhone.
3.0.0 (3G): iPhone1,2_3.0_7A341_Restore.ipsw

Quando fizer o download do ficheiro IPSW, é aconselhavel fazer-lo através do Firefox, uma vez que o Safari por vezes auto extrai-o.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Segundo Passo
Duplo clique para montar o PwnageTool 3.0 e arraste o icone PwnageTool para a pasta Pwnage.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Depois através da pasta Pwnage, faça duplo clique para iniciar a aplicação PwnageTool.

Clique OK se apresentado um aviso.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Terceiro Passo
Selecione Expert Mode na barra superior do menu
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Quarto Passo
Selecione o seu iPhone. Um "visto" irá aparecer sobre a imagem do seu iPhone.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Quinto Passo
Clique na seta azul para continuar. Será encaminhado á pagina "Browse for iPSW".
Se o PwnageTool não encontrar automáticamente o ficheiro IPSW, pode clicar em Browse for IPSW....
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac


Clique para selecionar o ficheiro IPSW que descarregou, um "visto" irá aparecer. Depois clique na seta azul para continuar.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Sexto Passo
Será encaminhado a um menu com 7 escolhas. Clique para selecionar General depois clique no botão com a seta azul.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

General Settings permite decidir o tamanho da partição. Clique em "Activate the phone" e "Disable Partition wipe-out". Clique no botão da seta azul.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

NOTA*: Desactive Activate the Phone se tiver um iPhone legitimo activado por uma operadora oficial.
NOTA*. Pode ter que aumentar o tamanho da partição root ligeiramente. A minha primeira tentatica falhou a criar o IPSW até que aumentei a partição até 695 MB.


O Bootneuter settings estão a cinzento para o iPhone 3G. Clique no botão da seta azul.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

O menu Cydia settings permite criar pacotes customizados, para que não tenha que instalar manualmente as aplicações necessárias mais tarde.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Clique em Download packages. Agora clique em Refresh para ver todos os pacotes disponiveis. Faça duplo clique nos pacotes que quer, e ficaram disponiveis na tab Select Packages.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Selecione as que quer e clique no botão da seta azul.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

O menu Custom Packages Settings mostra uma lista de configuração dos pacotes par ao seu IPSW. Por agora deixe as configurações como estão. Clique no botão da seta azul para continuar.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

O menu Custom Logos Settings permite adicionar as suas proprias imagens como logotipos de arranque. Clique em Browse para seleccionar o seu logotipo de arranque e o logotipo de Recovery.
Se quiser usar os do iClarified eles podem ser encontrados aqui:
Boot Logo, Recovery Logo
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Lembre-se das regras: RGB ou formata Grayscale com o canal Alpha e dimensão menor que 320x480...
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Clique no botão da seta azul para continuar.

Sétimo Passo
Está agora pronto para o processo de pwnage! Clique no botão Build para seleciona-lo, em seguida clique no botão da seta azul para começar.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Oitavo Passo
Será questionado se quer guardar o seu ficheiro .ipsw alterado. Guarde-o na sua pasta Pwnage que criou no Desktop.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

O seu IPSW está agora a ser criado. Por favor espere até 10 minutos.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Será questionado para inserir a sua password de administrador. Faça-o e clique no botão OK.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Quando questionado se o seu iPhone já foi Pwned antes, clique em Não (No). Permite um melhor restauro.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Ser-lhe-á pedido para desligar o dispositivo. Certifique-se que está conectado á porta USB.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Nono Passo
Prepare-se para seguir as indicações. Irá dizer-lhe para primir o botão home e o botão power durante 10 segundos. depois, tem de libertar o botão power e manter o botão home primido por 10 segundos para entrar no DFU.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Se falhar, irá mostrar uma mensagem de erro. Clique Yes, desconecte o iPhone do USB. Desligue-o, e ligue-o de seguida. Ligue-o de novo ao USB e desligue-o quando indicado.

Quando feito com sucesso, o Pwnage 2.2 irá mostrar uma mensagem dizendo que entro no modo DFU com sucesso. O iTunes i´ra tambem conectar-se.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Décimo Passo
No iTunes, pressione a tecla Alt/Option e clique restore (restaurar).
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Décimo Primeiro Passo
Navegue até a pasta Pwnage no seu Desktop usando a caixa de dialogo que aparece. Selecione o IPSW alterado que foi criado (iPhone1,2_3.0_7A341_Custom_Restore.ipsw) e clique Abrir ( Open).
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Décimo Segundo Passo
O iTunes irá agora restaurar o firmware no seu iPhone. Isto pode também demorar até 10 minutos.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Se desejar pode restaurar de um anterior backup para que mantenha todas as suas configurações ou começa o iPhone de inicio.
Como fazer um Jailbreak ao iPhone 3G com o OS3.0 usando o Pwnage Tool para Mac

Décimo Terceiro Passo
Uma vez terminado o restauro, o seu iPhone irá reiniciar irá reparar que o Cydia é agora apresentado no seu SpringBoard!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (363)
You must login or register to add a comment...
Pramodh
Pramodh - November 25, 2013 at 4:01pm
Many thanks for the precise tutorial. Worked flawlessly for me and I have android successfully working on my iPhone 3g which has 3.1.3. However, I am unable to get data working in android. Can someone help please? Should I setup an APN manually?
Clement Rhein
Clement Rhein - November 28, 2012 at 5:19pm
I've one this process with ease with my iPhone 2G. I'm now trying doing the same with my iPhone 3G. All is fine apart from the DFU mode. I have tried times and times again, leaving it a little less than 10 sec, leaving a little more than 10 sec, right on the dot on 10 sec... Not having any luck. I have tuned the device off, disconnected, turn back on again, wait, and connect again between each time. Anybody can help? Thanks
Thitinat
Thitinat - June 14, 2013 at 2:22pm
Inut1982
Thitinat
Thitinat - June 14, 2013 at 2:23pm
Thitinat Sirichang
Thitinat
Thitinat - June 14, 2013 at 2:24pm
5100200252615
Thitinat
Thitinat - June 14, 2013 at 2:25pm
M.iclarified.com
bigbts
bigbts - July 8, 2011 at 9:08pm
Hey! Is there anyway to change the custom logos after the phone has already been jailbroken using the program?
Eddy
Eddy - January 29, 2011 at 5:18pm
Worked great for me, many thanks. Cydia came up with some errors but worked fine in the end (no fault of this tutorial).
MegaSuperAdrian
MegaSuperAdrian - December 21, 2010 at 1:46pm
I get “PwnageTool_3.1.5.dmg.5344262.TPB.torrent” instead of “PwnageTool_3.1.5.dmg” and when I double click it it asks me to choose an application to open it. And I'm stucked. I tried to rename the folder by deleting it's last part but it's not working. Please help !!!!
Zero
Zero - December 21, 2010 at 2:13pm
............ Use uTorrent for Mac or any other BitTorrent app to download PwnageTool
laurent
laurent - December 6, 2010 at 10:03am
I did the JB on a 3G with a custom restore file on 4.2.1 on a BB 6.15.00. Worked flawlessly BUT when i wanted to unlock Cydia crashed. I can not unlock without Cydia!!!! What should i do? can somebody help me ? Thanks in advance Laurent
Olenka
Olenka - November 24, 2012 at 7:37am
Hi .. Followed the instructions prslieecy and I successfully Jail Break and updates IOS to 4.3.3 [ custom firmware ]Now strangely the legit sim stop working ans when I ve used ultrasnow it stays in searching and then display no signalAt present it is at 4.3.3 /05.14.02 help required as I cannot use my phone with its legit simI have repeated the process three four time also rest network setting , rebooting nothing works
Ivorz
Ivorz - July 25, 2010 at 1:01am
I bought an unlocked phone in Hong Kong. At that point it was 3.1.3, I made the fatal mistake of trying to upgrade it to OS4. Now all I get is the emergency restore icon. I followed the steps with pwnagetool but I get a 1600 error when i try to restore it. Is there something Im doing wrong? I noticed that the pwnagetool doesnt have a 3G so I picked the 3G(S) one, is that correct? Will this process even help me with my problem? Please advise. Thank you!
Ahmad
Ahmad - July 11, 2010 at 10:00pm
hello everybody, i have an iphone 3gs FW 3.1.3 and it is stuck on the emergency screen message!!!!!! Can pwnage tool 3.1.5 Activate it ??? Or there is no way yet to hactivate iphone 3gs on 3.1.3 ?? thanks in advance
somebody
somebody - May 1, 2010 at 7:06am
i did the jailbreak according tp the tutorial but am stuck now at not having a network. i did twice once with the activate your phone option checked and once without. Can anyone help me with the unlocking part... Funny thing thing is prior to this round i have never had the problem of unlocking the phone because it is a unlocked phone when it was purchased... Please help Thanks
hiphone
hiphone - April 30, 2010 at 12:33am
on jb iphone i had no wifi signal... I upgraded to 3.1.3 with itunes :( and it's dead now! I can turn it on but cannot activate it event with an ATT card (phone not bought here in US)... I tried the pwnage steps but it stops at where it says connects w USB and nothing happens... please help... m
cmdnyc
cmdnyc - April 28, 2010 at 5:18pm
OK so I've been fine until it asks me to connect my phone but it is not recognizing my phone being connected, any ideas?
cmdnyc
cmdnyc - April 28, 2010 at 4:34pm
OK Sorry if this a rookie question but I need some help. I downloaded the pwnage tools but it asks what to open it with. WHat do I do, it does not show the disk image (mac) so I am not sure hot to open this file. The restore file i downloaded seems to be recognized, any help would be appreciated. Thanks
cmdnyc
cmdnyc - April 28, 2010 at 4:37pm
uhh, nevermind i found it b ut stay tuned Im sure I will have more questions, thanks
Nivene
Nivene - November 21, 2010 at 9:29pm
So how did you do it? I'm having the same problem now.
jonathan Betancur / rockvertising.com
jonathan Betancur / rockvertising.com - April 24, 2010 at 5:38pm
Hello, you save my life!!!! Thanks a lot very good tutorial!
cldjr
cldjr - April 18, 2010 at 1:01pm
It's the third time that I try to jailbreak my iPhone 3G 3.1.3 with Pwnage Tool 3.1.5. I am following iClarified manuel indications and everything is going just as well as indicate till the iPhone reboot. Then I am only able to use it as an iPod ! The reception signal became flat, and I can't make or receive call anymore, same with messages. General information indicate there is no operator. The same simCard still working with an other cellphone. I am using an indonesian operator ProXL. What going wrong ?
Zero
Zero - April 26, 2010 at 11:39pm
Is your carrier authorized by Apple??... remember that this tutorial is only for jailbreak... If you don't have any signal or carrier recognized maybe it's because you haven't installed the software unlock..... Follow the unlock tutorials
cldjr
cldjr - April 28, 2010 at 10:18pm
My phone is unlock. At least I believe it, it's why the guy from the shop where I bought it told me. I bought it in Italy and use it in Indonesia with a different provider. What strange anyway is that UNLOCK tutorial says "Before you can follow these instructions you must have a jailbroken iPhone" !!!! How could many people and I, have an unlock iPhone not Jailbroken then !
Ahmad
Ahmad - July 11, 2010 at 9:57pm
dude ur talking about activation, your iphone is activated and jailbroken but not unlocked to unlock it go to cydia>search>ultrasn0w...and install it :) Its gonna unlock ur iphone to any baseband
Giselle
Giselle - August 2, 2010 at 1:07pm
I'm having the same problem and thanks for the response Ahmad. I didn't install any of the cydia files the first time. Which ones do I install to do this? I don't have cydia on my phone right now.
iamthenarwhal
iamthenarwhal - April 12, 2010 at 2:40pm
iphone 3g 3.1.3(7E18) 05.12.01 every time i try to run pwnage tool, i get to the browse for ipsw, select the 'iPhone1,2_3.1.3_7E18_Restore.ipsw' file and get a "wrong firmware bundle selected" message what am i doing wrong?
414n
414n - April 1, 2010 at 3:53pm
I keep getting the message "wrong firmware bundle selected" I have and iphone 3G it's running 3.1.3 and i'm using iPhone1,2_3.1.3_7E18_Restore.ipsw to jailbreak. but i keep getting that messege. I see that some people have said to use the custom version, but i don't understand that and i don't know where to get that. please help.
Roberto
Roberto - April 29, 2010 at 1:19pm
You are probably doing what I did, which was to choose the image on the left of 'iPhone' rather than 'iPhone 3Gs'. I know that you have a 3G, but the 3GS covers both.
saci
saci - July 23, 2010 at 7:29pm
thank for that - thatnhelped me too
saci
saci - July 23, 2010 at 7:29pm
thank for that - that helped me too
saci
saci - July 23, 2010 at 7:29pm
thanks for that - that helped me too
sagar
sagar - March 29, 2010 at 9:20am
I tried unlocking with this....but i dont get any network nor am i able to connect to wifi.....help
lunytune
lunytune - March 22, 2010 at 2:56pm
I did the jailbrake part, but the to unlock the GSM part it wont work..at all.. anybody knows how tp make unlock
21
21 - March 14, 2010 at 3:40pm
Hi...when will the jailbreak for 3.1.3 for windows will come out??thank you so much!!
yvandealer
yvandealer - March 13, 2010 at 1:23pm
Every thing ok but when installing firmware with iTune, I get an error (2600 or similar), do I need to use a particular version of iTunes? (got 9.0.3) or is there any possibility that the bootloaders I get on the net are corrupted (the one on the tutorial is not available from here) Thanks.
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS