March 28, 2024

Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Posted February 14, 2010 at 11:52pm by iClarified
EnglishDutchFrenchKoreanPolishPortuguesePortuguese (Brazil)RomanianRussianSlovakSpanishSwedish
Следуя этой инструкции вы сможете разлочить и сделать JailBreak Вашему iPhone 2G (Алюминий), с установкой прошивки 3.0

Для разлочки iPhone 3G нажмите сюда.
К сожалению, PwnageTool пока не доступен для Windows. Необходимо использовать QuickPwn чтобы сделать jailbreak. Как только инструкции появятся, вы сможете найти их здесь .

Убедитесь, что у вас установлен iTunes 8.2 перед продолжением...




Итак, Создайте папку на рабочем столе. в нее нужно поместить несколько файлов. 2 файла загрузчика (Bootloader):
- BL 3.9
- BL 4.6
Pwnage 3.0

А также файл прошивки 3.0
3.0.0 (2G): iPhone1,1_3.0_7A341_Restore.ipsw

Лучше загружать файлы FireFox'ом

Шаг Первый
Создайте папку и поместите загруженные файлы туда.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)


Шаг Второй
Двойной щелчок по мышке, чтобы открыть образ PwnageTool dmg.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

перетащите PwnageTool в папку Pwnage и запустите его.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Нажмите Ok если выскочит предупреждение
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Третий
Нажмите Expert Mode в верхнем меню программы.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Четвертый
Выберите iPhone из показаных устройств и убедитесь, что около него стоит большая галка. Затем нажмите стрелку в правом нижнем углу.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Пятый
Появилась страница "Browse for IPSW" (найти IPSW). Если вы загружали прошивку через iTunes, то он её автоманически найдет. Если нет- нажмите кнопку Browse for IPSW....
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Нажмите на найденный IPSW файл, Рядом с ним должна появиться галочка. Теперь нажмите голубую кнопку со стрелкой.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Шестой
Затем появится меню с семью (7) пунктами. Выберите General (Основное) и нажмите на голубую стрелку.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

General (Основные) настройки позволяют вам определить размер раздела. Выберите Activate the phone (Активировать телефон) и Enabled baseband update (Обновление телефонного модуля). Нажмите на голубую стрелку.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

***Если Обновление телефонного модуля (Enable Baseband update) не отмечено, отметьте. Это позволит разлочить ваш телефон!***
***Для 3.0 прошивки возможно понадобится увеличить размер раздела. 590 МБ вполне достаточно***

В настройках Bootneuter , нажмите на Neuter bootloader (загрузчик Neuter), Unlock baseband (Разлочка телефонного модуля), и Auto-Delete BootNeuter.app. (автоматическое стирание BootNeuter.app). Без особой надобности можно и не обновляться до 4.6 . Нажмите на голубую стрелку.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Настройки Cydia позволяют вам выбрать, какие программы установить сразу вместе с прошивкой.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Нажмите на Download packages (загрузить пакеты/программы). Затем нажмите Refresh (обновить), для просмотра доступных пакетов. Двойное нажатие, чтобы потом их выбрать во вкладке Select Packages (выбор пакетов).
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)
Отметьте галкой нужные, потом нажмите на голубую стрелку.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Custom Packages Settings (Настройка своих пакетов) показывает ваши пакеты для прошивки IPSW. Оставьте их как есть. Нажмите голубую кнопку.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Меню Custom Logos Settings (настройка своих Логотипов) позволяет вам вставить свои картинки вместо яблока при включении iPhone. нажмите кнопку Browse (найти) чтобы выбрать картинку при загрузке и картинку в режиме восстановления.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Правила: Формат RGB или оттенки серого с Alpha (Альфа) каналом и разрешением не более 320x480. Вы можете найти картинки от iClarified Здесь: Boot Logo (при загрузке), Recovery Logo (Режим восстановления)
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Голубую кнопку нажмите, чтобы продолжить.

Шаг Седьмой
Теперь вы готовы сделать свою прошивку. Отметьте "Build" (Создать) и нажмите the blue arrow button (Голубую кнопку).
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Восьмой
Если вы делаете это в первый раз, вас попросят найти файлы BL 3.9 и BL 4.6. Ответьте нет, если программа попросит разрешение на поиск в интернете.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Программа спросит вас про файл 3.9BL. Нажмите Yes (да) затем найдите файл BL-39.bin, который вы положили в папку PWNage, и нажмите кнопку Open (открыть).
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

выберите файл в папке PWNage, и нажмите Open (открыть).


То же самое делаем и с BL 4.6.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)


***: После загрузки файла 4.6 BL вас возможно спросят, официальный ли вы пользователь AT&T или нет. Если у вас есть официальная SIM AT&T и вы по ней звоните,то нажатие на "yes" (да) не разлочит и активирует iPhone Так как у вас официальный тариф и нет в активации надобности. Но даже если вы официальный абонент AT&T и все-таки хотите разлоченный iPhone, нажмите "No" (Нет)

Шаг Девятый
После того, как были выбраны файлы BL, вас спросят, где сохранить файл прошивки .ipsw . Сохраните его в папку PWNage на вашем рабочем столе.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Десятый
Ваша прошивка IPSW создается. Процесс может занять 10 минут.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Программа спросит ваш пароль (администратора), введите и нажмите OK .
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Если будет вопрос "Джейлбрейкали ли вы свой айфон ранее??", Лучше ответить No (нет). Меньше будет проблем)))).
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Теперь выключите телефон. Убедитесь, что он подсоединен к USB порту.


Шаг Одиннадцатый
Будьте готовы к выполнению операций в ведение вашего iPhone в режим DFU mode (онотоле-мод))). Зажмите кнопки home и power на 10 секунд. Теперь отпустите power и продолжайте жать на home еще 10 секунд.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Если не получится, программа вам об этом скажет. нажмите Yes (да). отсоедините iPhone от USB. Выключите и затем включите его. Подсоедините к компьютеру iPhone и повторите действия перечисленные выше (выключить, home+Power, home)
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Если все получилась, Pwnage скажет, что вы успешно вошли в DFU mode. iTunes тоже выскочит.
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)


Шаг Двенадцатый
В Тунце (iTunes), зажмите кнопку Alt/Option и нажмите Restore (восстановить).
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Тринадцатый
Выберите только что созданную прошивку (iPhone1,1_3.0_7A341_Custom_Restore.ipsw), которую вы поместили в папку Pwnage и нажмите кнопку Open (открыть).
Как сделать разлочку вашего iPhone 2G на OS 3.0 Используя PwnageTool (Mac)

Шаг Четырнадцатый (заключительный)
После прошивки, ваш iPhone перезагрузится. Телефон включится на программе BootNeuter.app которая его разлочит для раоты со всеми сетями и SIM картами.

Это займет 5 минут. После этого iPhone перегрузится и вы сможете им пользоваться.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (363)
You must login or register to add a comment...
Pramodh
Pramodh - November 25, 2013 at 4:01pm
Many thanks for the precise tutorial. Worked flawlessly for me and I have android successfully working on my iPhone 3g which has 3.1.3. However, I am unable to get data working in android. Can someone help please? Should I setup an APN manually?
Clement Rhein
Clement Rhein - November 28, 2012 at 5:19pm
I've one this process with ease with my iPhone 2G. I'm now trying doing the same with my iPhone 3G. All is fine apart from the DFU mode. I have tried times and times again, leaving it a little less than 10 sec, leaving a little more than 10 sec, right on the dot on 10 sec... Not having any luck. I have tuned the device off, disconnected, turn back on again, wait, and connect again between each time. Anybody can help? Thanks
Thitinat
Thitinat - June 14, 2013 at 2:22pm
Inut1982
Thitinat
Thitinat - June 14, 2013 at 2:23pm
Thitinat Sirichang
Thitinat
Thitinat - June 14, 2013 at 2:24pm
5100200252615
Thitinat
Thitinat - June 14, 2013 at 2:25pm
M.iclarified.com
bigbts
bigbts - July 8, 2011 at 9:08pm
Hey! Is there anyway to change the custom logos after the phone has already been jailbroken using the program?
Eddy
Eddy - January 29, 2011 at 5:18pm
Worked great for me, many thanks. Cydia came up with some errors but worked fine in the end (no fault of this tutorial).
MegaSuperAdrian
MegaSuperAdrian - December 21, 2010 at 1:46pm
I get “PwnageTool_3.1.5.dmg.5344262.TPB.torrent” instead of “PwnageTool_3.1.5.dmg” and when I double click it it asks me to choose an application to open it. And I'm stucked. I tried to rename the folder by deleting it's last part but it's not working. Please help !!!!
Zero
Zero - December 21, 2010 at 2:13pm
............ Use uTorrent for Mac or any other BitTorrent app to download PwnageTool
laurent
laurent - December 6, 2010 at 10:03am
I did the JB on a 3G with a custom restore file on 4.2.1 on a BB 6.15.00. Worked flawlessly BUT when i wanted to unlock Cydia crashed. I can not unlock without Cydia!!!! What should i do? can somebody help me ? Thanks in advance Laurent
Olenka
Olenka - November 24, 2012 at 7:37am
Hi .. Followed the instructions prslieecy and I successfully Jail Break and updates IOS to 4.3.3 [ custom firmware ]Now strangely the legit sim stop working ans when I ve used ultrasnow it stays in searching and then display no signalAt present it is at 4.3.3 /05.14.02 help required as I cannot use my phone with its legit simI have repeated the process three four time also rest network setting , rebooting nothing works
Ivorz
Ivorz - July 25, 2010 at 1:01am
I bought an unlocked phone in Hong Kong. At that point it was 3.1.3, I made the fatal mistake of trying to upgrade it to OS4. Now all I get is the emergency restore icon. I followed the steps with pwnagetool but I get a 1600 error when i try to restore it. Is there something Im doing wrong? I noticed that the pwnagetool doesnt have a 3G so I picked the 3G(S) one, is that correct? Will this process even help me with my problem? Please advise. Thank you!
Ahmad
Ahmad - July 11, 2010 at 10:00pm
hello everybody, i have an iphone 3gs FW 3.1.3 and it is stuck on the emergency screen message!!!!!! Can pwnage tool 3.1.5 Activate it ??? Or there is no way yet to hactivate iphone 3gs on 3.1.3 ?? thanks in advance
somebody
somebody - May 1, 2010 at 7:06am
i did the jailbreak according tp the tutorial but am stuck now at not having a network. i did twice once with the activate your phone option checked and once without. Can anyone help me with the unlocking part... Funny thing thing is prior to this round i have never had the problem of unlocking the phone because it is a unlocked phone when it was purchased... Please help Thanks
hiphone
hiphone - April 30, 2010 at 12:33am
on jb iphone i had no wifi signal... I upgraded to 3.1.3 with itunes :( and it's dead now! I can turn it on but cannot activate it event with an ATT card (phone not bought here in US)... I tried the pwnage steps but it stops at where it says connects w USB and nothing happens... please help... m
cmdnyc
cmdnyc - April 28, 2010 at 5:18pm
OK so I've been fine until it asks me to connect my phone but it is not recognizing my phone being connected, any ideas?
cmdnyc
cmdnyc - April 28, 2010 at 4:34pm
OK Sorry if this a rookie question but I need some help. I downloaded the pwnage tools but it asks what to open it with. WHat do I do, it does not show the disk image (mac) so I am not sure hot to open this file. The restore file i downloaded seems to be recognized, any help would be appreciated. Thanks
cmdnyc
cmdnyc - April 28, 2010 at 4:37pm
uhh, nevermind i found it b ut stay tuned Im sure I will have more questions, thanks
Nivene
Nivene - November 21, 2010 at 9:29pm
So how did you do it? I'm having the same problem now.
jonathan Betancur / rockvertising.com
jonathan Betancur / rockvertising.com - April 24, 2010 at 5:38pm
Hello, you save my life!!!! Thanks a lot very good tutorial!
cldjr
cldjr - April 18, 2010 at 1:01pm
It's the third time that I try to jailbreak my iPhone 3G 3.1.3 with Pwnage Tool 3.1.5. I am following iClarified manuel indications and everything is going just as well as indicate till the iPhone reboot. Then I am only able to use it as an iPod ! The reception signal became flat, and I can't make or receive call anymore, same with messages. General information indicate there is no operator. The same simCard still working with an other cellphone. I am using an indonesian operator ProXL. What going wrong ?
Zero
Zero - April 26, 2010 at 11:39pm
Is your carrier authorized by Apple??... remember that this tutorial is only for jailbreak... If you don't have any signal or carrier recognized maybe it's because you haven't installed the software unlock..... Follow the unlock tutorials
cldjr
cldjr - April 28, 2010 at 10:18pm
My phone is unlock. At least I believe it, it's why the guy from the shop where I bought it told me. I bought it in Italy and use it in Indonesia with a different provider. What strange anyway is that UNLOCK tutorial says "Before you can follow these instructions you must have a jailbroken iPhone" !!!! How could many people and I, have an unlock iPhone not Jailbroken then !
Ahmad
Ahmad - July 11, 2010 at 9:57pm
dude ur talking about activation, your iphone is activated and jailbroken but not unlocked to unlock it go to cydia>search>ultrasn0w...and install it :) Its gonna unlock ur iphone to any baseband
Giselle
Giselle - August 2, 2010 at 1:07pm
I'm having the same problem and thanks for the response Ahmad. I didn't install any of the cydia files the first time. Which ones do I install to do this? I don't have cydia on my phone right now.
iamthenarwhal
iamthenarwhal - April 12, 2010 at 2:40pm
iphone 3g 3.1.3(7E18) 05.12.01 every time i try to run pwnage tool, i get to the browse for ipsw, select the 'iPhone1,2_3.1.3_7E18_Restore.ipsw' file and get a "wrong firmware bundle selected" message what am i doing wrong?
414n
414n - April 1, 2010 at 3:53pm
I keep getting the message "wrong firmware bundle selected" I have and iphone 3G it's running 3.1.3 and i'm using iPhone1,2_3.1.3_7E18_Restore.ipsw to jailbreak. but i keep getting that messege. I see that some people have said to use the custom version, but i don't understand that and i don't know where to get that. please help.
Roberto
Roberto - April 29, 2010 at 1:19pm
You are probably doing what I did, which was to choose the image on the left of 'iPhone' rather than 'iPhone 3Gs'. I know that you have a 3G, but the 3GS covers both.
saci
saci - July 23, 2010 at 7:29pm
thank for that - thatnhelped me too
saci
saci - July 23, 2010 at 7:29pm
thank for that - that helped me too
saci
saci - July 23, 2010 at 7:29pm
thanks for that - that helped me too
sagar
sagar - March 29, 2010 at 9:20am
I tried unlocking with this....but i dont get any network nor am i able to connect to wifi.....help
lunytune
lunytune - March 22, 2010 at 2:56pm
I did the jailbrake part, but the to unlock the GSM part it wont work..at all.. anybody knows how tp make unlock
21
21 - March 14, 2010 at 3:40pm
Hi...when will the jailbreak for 3.1.3 for windows will come out??thank you so much!!
yvandealer
yvandealer - March 13, 2010 at 1:23pm
Every thing ok but when installing firmware with iTune, I get an error (2600 or similar), do I need to use a particular version of iTunes? (got 9.0.3) or is there any possibility that the bootloaders I get on the net are corrupted (the one on the tutorial is not available from here) Thanks.
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS