March 19, 2024
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

Posted November 3, 2009 at 11:54pm by iClarified
EnglishChinese (Traditional)FinnishFrenchGermanItalianJapaneseRomanianRussianSpanishSwedish
下記はMacでBlackRa1nとBlackSn0wを使ってジェールブレークとSIMロック解除のしかたである。

このガイドは最新3.1.2ソフトウェアアップデートと05.11.07ベースバンドの対象である。無認可のキャリヤーのアクティベーションが必要であるiPhoneにも対象。この前この説明によってもうジェールブレークできた場合に下記のガイドがもう少し簡単になる。

最新なiPhone 3GS (=新しいBootromのある機器)には、「Tethered」のジェールブレークしかできません。「Tethered」ジェールブレークされたiPhoneは電池がなくなった、電気が切られた時などに再起動するにはまたパソコンに接続することが必要となる。


続く前に、現在のベースバンドが05.11.07だとこの説明によって確認してください。そうではない場合、iTunesで3.1.2ソフトウェアアップデートをしてください。

このガイドのWindows版はここである。そろそろ始まりましょう。




ステップ1
ブラウザで、http://www.blackra1n.comを開けてください。下にあるアップルのロゴをクリックしてください。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

ステップ2
デスクトップにそのファイルをダウンロードしてください。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

ステップ3
ダウンロードしたblackra1n.zipを解凍して、入ってあるアプリケーションを開けてください。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

ステップ4
iPhone(及びiPod Touch)がパソコンに繋がっているのを確認してから、大きな「make it rain」バトンをクリックしてください。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

ステップ5
iPhoneが自動的に「recovery mode」に入る。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

普通のrecovery modeのイメージではなくて、GeoHotの写真が表示される。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

blackra1nが実行してからiPhoneが自動的に再起動する。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

BlackRa1nが「無料なソフトであって、寄金をしたいならGeoHot (geohot@gmail.com)まで送っていただきます。」という意味のメッセージが表示される。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

ステップ6
再起動されたらジェールブレークの活動が終わった。blackra1nのアイコンがSpringboardに入っているはずである。インターネットに接続していることを確認して、blackra1nを開けるのにそのアイコンをタッチしてください。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

お好みのインストール用アップを選んで、SIMロック解除もしたいならsn0wも選択してください。実行するのに右上隅のInstallバトンをタッチしてください。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで] BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

BlackRa1nが選択されたパッケージをダウンロード、インストールする。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで] BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

blacksn0wを使ってSIMロック解除を選択した場合には、sn0wのインストール後のログが表示される。CommCenterが自動的に再起動されて、機器を再起動する必要がない。自分のキャリヤーが3Gではないなら3Gを無効にしてください。続くのにCloseバトンを。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで] BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

ステップ7
BlackRa1nが完全に終わったらSpringBoardを自動的に再起動する。すると、選択したインストール用アップがSpringBoardに入っているはず。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

ステップ8
インストール用アップが正しくインストールされたのを確認したら、BlackRa1nのアップを落とすのにBlackRa1nに入っている Uninstall blackra1nバトンを。
BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで] BlackSn0wを使ってiPhone 3G及びiPhone 3GSをジェールブレークしかた[Macで]

***GeoHotさん、このジェールブレークとSIMロック解除を作っていただいてどうもありがとうございました!また、参加したみんなにもありがとうございました!下のバトンでGeoHotまで寄金するのが可能。(寄金するならiClarifiedではなくてGeoHotがもらうこと。)

(最後に、がんばりましたが、この拙訳の日本語の間違えを許してくださいませ!訳者:twitter @cromas)
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (174)
You must login or register to add a comment...
rremosson
rremosson - November 24, 2013 at 7:03pm
My attempt to unlock a 3G was unsuccessful as I only got to Step 5 but no "picture of Geo Hot". Any suggestions? many thanks seabees@box.az
summer s
summer s - August 23, 2013 at 6:56am
SUMMER S. ANGELES CITY PH MY CEL# +639192616111====SMS ONLY
jiohn paredes
jiohn paredes - September 15, 2012 at 10:17pm
gracias
bro
bro - June 30, 2010 at 7:37am
Is there any chances that BlackRa1n will totally jailbreak the new iPhone 3GS (updated Bootrom) instead of tethered jailbreak??? Because I've been connecting and jailbreak my new iPhone 3GS (updated Bootrom) to my laptop everytime the battery runs out for a year now.
CA
CA - April 28, 2010 at 11:23pm
Worked great thank you (just had to do the reset network settings to get wifi up no big deal)... any known issues going to the newest iTunes 9.1.1?
tracer123
tracer123 - April 27, 2010 at 4:00am
Yes...BUT THE PHONE DOES NOT REBOOT!!!!!!!!!!!!!!!!!
Eliyahu
Eliyahu - April 21, 2010 at 6:00pm
When can we expect to Jailbreak and Unlock for iPhone 3Gs with Baseband 05.12.01?
indga
indga - April 18, 2010 at 4:04am
I couldn't connect to Cydia (kept on getting connection errors) and couldn't download blacksn0w either, but I unlocked my phone 3G, 3.12, 5.11.07 by following Vikram's words found at http://www.hackint0sh.org/f230/95865.htm: 1. downloaded PhoneDisk (free until September) 2. downloaded blacksn0w at http://www.mediafire.com/file/qlwymezmyzw/blacksn0w.deb 3. jailbroke with PwnageTool 4. Extracted .deb and found the necessary files in the /data folder 5. Copied files to the iPhone using PhoneDisk (put files in data/System/Library/LaunchDaemons/com.apple.CommCenter.plist and data/usr/lib/blacksn0w.dylib) 6. Restarted the iPhone and my carrier came up. Now, I'm going to back up and restore my iPhone but without using iTunes. PhoneDisk, iPhone Backup Extractor, and SQLite Database Browser makes it all possible! My last restore from backup took 54 hours; my last backup took 29 hours. I'm not ever going to backup using iTunes. I've compiled a set of instructions from browsing the web and they will help with backup and restore. Freedom!!! F R E E D O M!
anna
anna - April 17, 2010 at 10:36pm
I've once used blacksnow to reboot my iphone cuz I forgot to charge the phone and since that time, the iphone is unable to connect to wifi anymore, is there any way to fix this problem?
Mo
Mo - April 27, 2010 at 9:09am
Try restoring the network settings.
anna
anna - April 5, 2010 at 3:01pm
I use black snow to reboot my 3GS since the battery went out last night, but it has problem in connecting to the internet, it cannot find WIFI conncection, can someone tell me how to fix it?
leO
leO - February 23, 2010 at 1:36pm
hi.i jailbreak and unlock mi iphone-3GS-3.1.2. work is good,only one problem,when i tern power off and next mornig tern power on, mi phone go to recoverry mode,and i need using blackSnOw ageIn ??? PLEASE HALP ME.
mauurenaa
mauurenaa - February 23, 2010 at 2:23pm
You have to use Blacksn0w again to turn it on. That's why you don't let the batterie die.
leo
leo - February 24, 2010 at 3:18pm
wot,every time after i tern phone on i need use blacksnow???
mauurenaa
mauurenaa - February 24, 2010 at 3:38pm
Yep!, that's very annoying. On the 3GS that's the way it works. With the 3G you don't have that problem. However there is this one iPhone 3GS 14GB I unlocked and works just fine, doesn't matter how many time you turn it off and on you don't have to use the software; don't know why I didn't do anything different. Good Luck!
Xandersfury
Xandersfury - January 28, 2010 at 12:50pm
T-Mobile customers! FOR MMS go to http://www.joe-hickman.com/t-mobile-iphone-mms-fix-the-media-content-was
TeamLCL
TeamLCL - January 28, 2010 at 8:15am
I bought the new 3gs and followed the tutorial "How to Jailbreak and Unlock Your iPhone 3G, 3GS Using BlackSn0w [Mac]". It goes right. I can used my iphone on other carrier, use wifi, used the GPS, connect youtube thought wifi. But I am not able to activate 3G. I all ready check wth my new carrier. every think is right in his side. Does anyone has an answer to this problem?
Xandersfury
Xandersfury - January 26, 2010 at 9:40am
Just followed these directions plus did the LEGACY t-mobile download from Cydia to get picture messaging. Works GREAT!! But!!!!! PLEASE HELP-- Even when I'm on WIFI it says YOUTUBE CANNOT CONNECT. Does anyone know how to fix this? 3G Unlocked iphone on T-mobile
mauurenaa
mauurenaa - January 26, 2010 at 3:41pm
Yeah, follow the steps on this link. http://www.redmondpie.com/youtube-fix-for-iphone-3.1.2-blacksn0w-unlock-9140104/
Xandersfury
Xandersfury - January 28, 2010 at 10:16am
Thanks! It worked!
aaron
aaron - January 21, 2010 at 10:43am
I get a "you do not have internet connection" error. I am currently in China, and no option to connect to ATT :) But, I do have wifi connected. I have a 3GS with 3.1.2 Any suggestions? -Aaron www.codes4discount.com [for discounts on zagg skins]
Craig
Craig - January 18, 2010 at 5:26am
I have a jailbroken iPhone 3GS which I have powered off completely and rebooted several times using Blackra1n, today however the same process no longer works!! When I click 'make it ra1n' the GeoHotz picture comes up as normal, after about 30 seconds or so it restarts again and comes up with the itunes connect screen, it just does this over and over! Anyone else having this problem? can anyone help? it was working fine up to today!
alexxxey
alexxxey - January 27, 2010 at 9:42pm
kill the ituneshelper.exe , moove blackrain.exe to the root of disk c then run blackrain again
leo
leo - February 23, 2010 at 2:15pm
how i kill my itunes???
Nestor
Nestor - March 18, 2010 at 1:00pm
Yes, I've got the same problem and I don't know how to solve it.
anna
anna - January 17, 2010 at 4:55pm
i just got the 3gs and i tried to jailbreak and unlock using blackra1n several times but it didn't work. there is a window showed that the phone is jailbroken but the phone itself never reboot, it always asked for restore...i have waited a long time to see if it will reboot, but didn't happen. plus i checked the version and the firmware is correct. now i have no idea, please help
Amin
Amin - January 18, 2010 at 1:54am
If u just bought the iPhone frm apple store then restore the phone once, and then use blackra1n to JB it. After receiving the message that ur phone is jailbroken, leave ur phone connected and close the blackra1n. When u see the iTunes logo on ur phone n says that u need to restore ur phone, just reopen the blackra1n again n u should be fine.
Donna Thrower
Donna Thrower - February 10, 2010 at 11:48am
I've had the same problem. Downloaded black ra1n, it came up with the message saying it had worked. It never rebooted, came up with the connect to itunes message on screen. Did that, and itunes told me to restore to factory settings as it was in recovery mode. Why it did not reboot I do not know, but now have lost a lot of things that I would rather have not lost!!!!! Won't be trying this again in a hurry.
Diego
Diego - March 2, 2010 at 11:09pm
That's exactly what happened to me. Can anybody help?
Diego
Diego - March 2, 2010 at 11:32pm
Never mind, already solved it. If your phone wont reboot just run blackra1n again. That's all. Thanks for the help :-P
sam
sam - January 13, 2010 at 1:59am
please please someone help me!!! I got my iphone 3gs exchanged today from Apple because i was having some problems. i JB and unlocked the new phone, every things seem work great. BUT as soon as it turn off, the phone lock back again. plz help me. what should i do??
Noiz
Noiz - January 8, 2010 at 6:39pm
I ran the program and followed the instructions and it worked for me. The only issue I have is that when I try to run programs such as DiskAid, or Iphone Browser, it shows my device as Unlocked, when clearly I just used the blackra1n program to jailbreak my phone. Is there any way to get it so my phone can be seen as jailbroken, so that I'm able to use those programs to change system sounds. Thank you for any suggestions.
eng_alobaydee81
eng_alobaydee81 - January 4, 2010 at 1:54am
hi for all, please i need your help, i have a friend will come form us, he will bring me iphone 3gs 16gb, i living in malaysia, can i do a jailbreak for it, and what about if i will go to us later on, i can use it there or how. i am waiting your help, thanks. regards alobaydee.
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS