November 7, 2024
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Posted May 6, 2011 at 1:37pm by iClarified
EnglishFrenchPortuguese (Brazil)Swedish
Voici un tutoriel pour vous aider à jailbreaker votre iPad 1 avec la mise à jour du firmware iOS 4.3.3 en utilisant RedSn0w sous Windows. Le tutoriel (en anglais) pour Mac se trouve ici.

Première étape
Créer un dossier sur votre bureau appelé Pwnage

Téléchargez RedSn0w depuis ici et décompressez-le dans le dossier Pwnage.
Également, téléchargez la dernière mise à jour iOS 4.3.3 ci-dessous et mettez-la dans le même répertoire.


4.3.3 (iPad 1): iPad1,1_4.3.3_8J3_Restore.ipsw

Décompressez le zip RedSn0w dans le même répertoire.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Deuxième étape
Branchez votre iPad au PC et lancez iTunes.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Sélectionnez votre iPad depuis la liste sur la gauche. Maintenant, maintenez enfoncée la touche Shift du clavier (flèche qui pointe vers le haut) et cliquez sur le bouton Restaurer. Cette méthode de restauration est conseillée car elle permet de ne pas créer d'espace inoccupé sur votre iPad.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Allez au dossier Pwnage sur votre bureau et sélectionnez la mise à jour 4.3.3 du firmware ipsw. Cliquez sur le bouton Choose pour continuer.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Troisième étape
Une fois que iTunes a terminé de mettre à jour la version 4.3.3 de l'iOS, ouvrez le répertoire Pwnage sur votre bureau et lancez redsn0w depuis le fichier exe qu'on a extrait avant.

** Les utilisateurs de Windows 7 doivent lancer redsn0w en mode Vista Compatible. Vous pouvez le faire avec un clic sur l'exe puis Propriétés depuis le menu contextuel.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Quatrième étape
Une fois redsn0w ouvert, appuyez sur le bouton Browse (naviguer en français)
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Cinquième étape
Sélectionnez le firmware 4.3.3 ipsw que nous avons mis dans le répertoire Pwnage sur notre bureau puis cliquez sur Open.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Sixième étape
Une fois due le firmware a été vérifié cliquez sur le bouton Next pour continuer.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Septième étape
RedSn0w va maintenant préparer les données nécessaires au jailbreak
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Huitième étape
Depuis cette fenêtre, vous pouvez choisir les options de Jailbreak. Assurez-vous que Cydia reste bien coché et cliquez sur le bouton Next pour continuer.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Neuvième étape
Branchez votre iPad à votre PC et assurez-vous qu'il est bien étient (clic prolongé sur le bouton droit du haut, puis éteindre depuis l'écran), puis cliquez sur le bouton Next
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Dixième étape
RedSn0w va maintenant vous guider pour basculer en mode DFU. Plus d'infos sur comment basculer en mode DFU ici
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Maintenez enfoncé le bouton Home (rond en bas au centre sous l'écran) et le bouton Allumage (bouton droit du haut) pendant 10 secondes.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Relachez le bouton Allumage et continuez à maintenir le bouton Home jusqu'à ce que RedSn0w détecte le périphérique.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Onzième étape
Votre iPad va maintenant redémarrer
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Douxième étape
RedSn0w va maintenant installer le noyeau et la RAM nécessaire au jailbreak sur votre iPad.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

Treizième étape
Une fois que c'est fait, RedSn0w vous le signalera. Cliquez sur le bouton Finish. Quand votre iPad rebootera (moins de 5 minutes), il sera jailbreaké avec Cydia installé sur votre bureau iPad. Cydia est un store alternatif qui va vous permettre d'installer d'autres applications que celles présentes sur l'App store.
Comment Jailbreaker son iPad 1 avec RedSn0w (Windows) [4.3.3]

*Un grand merci à l'iPhone Dev-Team et I0n1c pour leur super boulot pour la communauté iPad.
**Les utilisateurs de Windows 7 peuvent essayer de faire tourner RedSn0w comme un administrateur sous le mode de compatibilité Windows Vista ou XP s'ils rencontrent des difficultés.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (55)
You must login or register to add a comment...
lawen
lawen - September 26, 2012 at 5:21pm
qwerftgyu
nn
nn - June 16, 2011 at 10:56am
I have an iPad 1 with iOS 4.2.1 and I'm trying to jailbreak it to the latest 4.3.3 and I keep getting error 3194 at the beginning of the process. The only thing unclear to me so far is if I need to update the software through iTunes alone to 4.3.3 before I follow all the described steps, since it doesn't say anything about that. Also My computer runs W7 64bit, so should I run the compatibility mode on just redsn0w or also for the ispw? I'm sorry the ignorance it's only my first time trying to jailbreak, I will appreciate any tips.
Anonymous
Anonymous - June 12, 2011 at 9:38pm
For those unable to download redsn0w, download it from here ('same' place, but newer executable, rc17): https://sites.google.com/a/iphone-dev.com/files/home/redsn0w_win_0.9.6rc17.zip?attredirects=0&d=1
syet
syet - May 19, 2011 at 3:23pm
Need help! Got stucked at "Exploiting limera1n"... I already run on admi and tried both Vista and XP SP3 compatibility mode. It kept hanging... Can anyone help me please!!!! Thanks!
Vishesh
Vishesh - May 7, 2011 at 8:57am
i cant download d ipsw file... it goes on to certain extent... lyk 80 mb or somethin... and den it stops automatically./.... i am using google chrome... can i find a torrent or somethin instead... i wanna jailbreak ipad 1... ios 4.3.3. ...
VZA
VZA - May 1, 2011 at 5:26pm
Always freezes on "uploading ramdisk." Windows Vista and using as admin.
Dan
Dan - May 1, 2011 at 10:37am
i have everything working and when it gets to waiting for reboot nothing happens have tried ten time and just get to the same point over and over. I am on a xp computer. although the one thing i notice is evertime i get to that step a window pops up and says usb cable malfunctioned suddenly. not sure it that is the problem or not. Any help thanks
Luna Heart
Luna Heart - April 28, 2011 at 9:28pm
Question: "Hold shift to restore as it won't create any wasted space" - will this erase everything on my iPad?? I don't want to go back to factory settings!!!
jeseny castillo
jeseny castillo - April 24, 2011 at 1:31am
I need to know when the unfreezing of the iphone is going to go out 3gs version 4.3 (8f190)
Coose
Coose - April 24, 2011 at 12:35am
VERY IMPORTANT FOR W7 USERS: Run in XP SP3 Compatibility mode and Run As Administrator. If you don't you'll see that you're stuck at the Dowloading Ramdisk and it will never finish
Soul Eater - Starz
Soul Eater - Starz - April 27, 2011 at 6:46pm
That actually worked, thanks a million man! x3 ;D
Moe
Moe - April 23, 2011 at 5:41pm
Thanks! It took me some time, but I finally jailbroke my Ipad. Advice to those attempting to do this....READ THE INSTRUCTIONS CAREFULLY. Thanks Again for the tutorial; keep it up guys!
ddt
ddt - April 22, 2011 at 10:27pm
Am stuck at the Exploiting limera1n phase... have done everything which is said here.... XP mode, run as administrator.. I even hard rebooted the ipad... the process ran but when the ipad is switched on..... no cydia... What else can i do?
ddt
ddt - April 24, 2011 at 6:56pm
I am using an ipad1 and even following the tutorials the tool gets stuck at at the exploiting limera1n stage. I am using Windows Vista and am running the tool with WinXP SP2 compatibility mode. Would there be any complications? Please let me know. Thanks.
What
What - April 21, 2011 at 11:53pm
Well, I'm having issues. I can't get this firmware or the previous one to update to the iPad (currently at the tethered 4..2.1). No matter what I do, I get an error code of 3194. I even went und modified the 'hosts' file in System32 to have the "74.208.105.171 gs.apple.com" line in it. No difference. I must doing something silly, but I'm at a loass as to what. Any ideas? I know I was having this issue at work too. both machines are W7 64bit. Is there a problem with the 64bit version perhaps?
banzaj
banzaj - April 20, 2011 at 8:13am
Same problem here - stuck at upload ramdisk or Kernel.. Ipad1 64gb
banzaj
banzaj - April 22, 2011 at 2:19am
Im DONE! If u are on Win7, run RedSn0w in compatibility mode ( WinXP SP 3 ) and RUN as Administrator! ( tested on RedSnoW14 ).
Cloud
Cloud - April 19, 2011 at 6:01am
When is ipad 2 jailbreak coming out?
Murray Kerdman
Murray Kerdman - April 15, 2011 at 12:43am
Forgive a nubee question. If I (A) fully "Sync" and "Backup" my iPad 1 (which is at 3.2.2) in iTunes beforehand and (B) follow the Tutorial and "Restore" my iPad to 4.3.1 and (C) use redsn0w RC12 to Jailbreak it will I (D) get back all of my programs and their associated data files (30GB of 64GB) (none of which are in iTunes itself- i.e. no music or video) when I "Re-Sync" the iPad 1 with iTunes? Also, will the above work with 4.3.2 just as well? Thanks in advance!
James
James - April 28, 2011 at 1:29pm
Hi...did you ever get a response to your question..I have the same question and am curious of the answer.
nurlip
nurlip - April 12, 2011 at 10:33pm
did anyone else have problems when they got to the part that says "make sure your ipad is off and connected to the computer, then click next"? I feel like an idiot b/c i'm good at these things but i turn my ipad off and as soon as the screen goes black, the damn thing comes back on by itself (b/c its plugged in..). I thought it was always like this but i don't usually turn it off while connected to the computer so i'm probably wrong. any tips on how to proceed?
nurlip
nurlip - April 13, 2011 at 10:51pm
just in case anyone else had this problem - i resolved by waiting for the screen to go black, (as in power off) then, before it auto-booted, i pushed/held the two buttons right then and it worked. the apple logo still showed up but after holding the buttons for about 6 seconds, it disappeared and it went into DFU mode. jailbreak is working fine and video mirroring with HDMI is pretty f'in sweet.
LVE
LVE - April 12, 2011 at 4:44pm
theres some error with redsnow.exe... all the way to the step to install cydia click next... when it upload the ramdisk... the redsnow stopped, and i get error tried 3 times, stuck at upload ramdisk, error redsnow.exe... any idea? wait for next jb?
RichardU
RichardU - April 8, 2011 at 2:47pm
Hi i do everything step for step, but it gets stuck on the last step where it says "uploading ramdisk" Any help would be really appreciate it.
jose cuervo
jose cuervo - April 12, 2011 at 9:49am
I have experience the same thing... Need help for this matter.....
ALEX
ALEX - April 12, 2011 at 8:47pm
go to redsnow click right click propertys select run like windows xp mode run as adminitrator that works fr me
Lve
Lve - April 15, 2011 at 5:04pm
i think ive solve this mather, i also tried many times and it didnt work... when i are in step 10 DFU mode, nr 3 when you relase the sleep button but hold the home, its 15sec, but when it reach 12-13sec JB switch to upload disk, so dont release the home button until the last 12 sec, so you have to do an count down 12 to 0 sec before release the home button, then it should work. If fail just press sleep + home at the same time and try again... GL
sunnybear
sunnybear - April 8, 2011 at 9:39am
im new to this. couple of questions i would like to ask. what would happen to all my old app, and games. how do i keep them along with all the saves after upgrade? thanks in advace.
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS